# wxRIDE Finally Available

**URL:** <https://www.ruby-forum.com/t/wxride-finally-available/130666>\
**Category:** wxRuby\
**Created:** [March 1, 2008, 4:16pm UTC](https://www.ruby-forum.com/t/wxride-finally-available/130666 "2008-03-01T16:16:30Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![masoto](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/d2c977/32.png) [@masoto](https://www.ruby-forum.com/u/masoto)\
**Post date:** [March 1, 2008, 4:16pm UTC](https://www.ruby-forum.com/t/wxride-finally-available/130666/1 "2008-03-01T16:16:30Z")

</div>

Hello fellow wxRuby users,

Well, after a long period in which I originally announced that I was  
creating an IDE, I have finally become satisfied enough to release a SVN  
Version of wxRIDE. I started the project out, and in cases where I  
couldn’t  
launch the application again, I utilized SciTE (Which uses Scintilla,  
same  
as wxRIDE), outside of that initial part, and subsequent failures to  
start,  
wxRIDE was created and modified with itself. (Basically, I used wxRIDE  
to  
write wxRIDE, as I progressed.)

Now, keep in mind, that this version is a very very very very alpha  
version  
of the editor, so if things blow up, and you loose hours of work, don’t  
blame me! Save your files, and save them very very often. Currently,  
here’s a list of features that are currently implemented in wxRIDE.

- Implements AUI demo to build the core interface for wxRIDE.
- Implements Scintilla through StyledTextCtrl. Further syntax  
highlighting  
needed, as Ruby is the only language currently implemented.
- Workspace Sidebar, to view files currently not associated to a  
project,  
and those that are associated to a project (Project handling not  
implemented  
yet), as well as a Filesystem Browser to browse files on your computer,  
without having to utilize the Open Dialog, and a non-functional Object  
Space  
to explore what classes and methods are being defined within Ruby source  
code.
- All basic editing functions, Cut/Copy/Paste/Find/Replace/multi-line  
(de-)indentation, Code Folding, etc, etc
- Help File Viewer for wxRuby documentation (No documentation yet for  
wxRIDE  
itself, and Help File Viewer subject to changes)
- Execution of Ruby Scripts, with capturing of output to a nice little  
window within the IDE! Capturing of output of other applications not  
implemented yet.
- Catching of errors that wxRIDE runs into itself within it’s code.  
Right  
now, wxError.rb creates a dialog to show the user, but sometimes it  
cannot  
execute for some reason (Work needing there), but the error file  
wxRIDE.erris still generated within the wxRIDE Directory, so you can  
review it to see  
what has gone wrong.
- Saving of Size, position, maximize/minimize state, panels open/closed  
in  
the AUI manager, as well as the default Home Page in the Notebook

What is still needed to be done:

As noted above, capture of output from other non-ruby programs, Project  
handling, etc, etc  
Replacement Graphics for various icons, and default actions. (Anyone  
want  
to volunteer?)  
Creation of a RAD component to generate complete GUI’s (Also, anyone  
want to  
help out?)

So far, this has only been tested on Windows, and Linux, as I have no  
mac  
around here (Hint Hint Sean and Alex), so I need testing on MacOS X, to  
see  
how well I programmed this to be cross-platform. To check out this new  
bleeding edge software, hook up your faviorate SVN checkout tool, and  
check  
out svn://rubyforge.org/var/svn/wxride/trunk or  
[http://wxride.rubyforge.org/svn/trunk/](http://wxride.rubyforge.org/svn/trunk/).

Suggestions, Help, Comments, whatever are much appreciated!

L8ers,

---

<div class="post-metadata">

**Author:** ![masoto](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/d2c977/32.png) [@masoto](https://www.ruby-forum.com/u/masoto)\
**Post date:** [March 1, 2008, 4:17pm UTC](https://www.ruby-forum.com/t/wxride-finally-available/130666/2 "2008-03-01T16:17:06Z")

</div>

Hey all,

Forgot one little side note. MacOS X and Linux users shouldn’t have to  
worry about this, but on Windows, I utilize win32/open3 in order to  
execute  
the process separately, instead of relying on popen to be available  
within  
Ruby itself. So until I have something setup to detect if win32/open3  
to be  
installed, you will need to install this extension in order to use. You  
can  
grab it by bringing up a command prompt, and typing in gem install  
win32-open3, or visiting [http://rubyforge.org/projects/win32utils](http://rubyforge.org/projects/win32utils)

L8ers all,

---

<div class="post-metadata">

**Author:** ![masoto](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/d2c977/32.png) [@masoto](https://www.ruby-forum.com/u/masoto)\
**Post date:** [March 1, 2008, 6:29pm UTC](https://www.ruby-forum.com/t/wxride-finally-available/130666/3 "2008-03-01T18:29:08Z")

</div>

> Hello fellow wxRuby users,
> 
> Well, after a long period in which I originally announced that I was  
> creating an IDE, I have finally become satisfied enough to release a  
> SVN  
> Version of wxRIDE.

Many thanks.

…

> What is still needed to be done:  
> …  
> Creation of a RAD component to generate complete GUI’s (Also, anyone  
> want to help out?)

Can it / will it be able to import and use XRC produced by other tools?

Alec

---

<div class="post-metadata">

**Author:** ![masoto](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/d2c977/32.png) [@masoto](https://www.ruby-forum.com/u/masoto)\
**Post date:** [March 14, 2008, 4:31pm UTC](https://www.ruby-forum.com/t/wxride-finally-available/130666/4 "2008-03-14T16:31:14Z")

</div>

Hi Mario,

2008/3/1, Mario S. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid):

> Hello fellow wxRuby users,
> 
> Well, after a long period in which I originally announced that I was  
> creating an IDE, I have finally become satisfied enough to release a SVN  
> Version of wxRIDE.

That’s great.  
Will you provide an archive file for wxRIDE for convenience in the  
future ?  
Anyway, I will have a look from my Linux box which has svn installed.

> - Implements Scintilla through StyledTextCtrl. Further syntax highlighting  
> needed, as Ruby is the only language currently implemented.

Does the syntax highlighting supports Ruby 1.9.0 new syntax ?  
{a: “value a”, b: “value b”} as an alternative for {:a =\> “value a”,  
:b =\> “value b” }

Currently, I think that there is no editor or IDE that supports this new  
syntax.  
It would be great if wxRIDE was the first IDE supporting this new  
syntax.

Cheers.

Chauk-Mean.

---

<div class="post-metadata">

**Author:** ![masoto](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/d2c977/32.png) [@masoto](https://www.ruby-forum.com/u/masoto)\
**Post date:** [March 14, 2008, 8:57pm UTC](https://www.ruby-forum.com/t/wxride-finally-available/130666/5 "2008-03-14T20:57:51Z")

</div>

Hello,

On 3/14/08, Chauk-Mean P [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) wrote:

> That’s great.  
> Will you provide an archive file for wxRIDE for convenience in the future  
> ?  
> Anyway, I will have a look from my Linux box which has svn installed.

I will be providing a package, along with a Setup file, that will  
execute,  
to ensure that everything that is needed is installed. But that will be  
after I get the initial setup done for wxRIDE.

> - Implements Scintilla through StyledTextCtrl. Further syntax  
> highlighting
> 
> > needed, as Ruby is the only language currently implemented.
> 
> Does the syntax highlighting supports Ruby 1.9.0 new syntax ?  
> {a: “value a”, b: “value b”} as an alternative for {:a =\> “value a”,  
> :b =\> “value b” }

I have no syntax validation being completed on it. If your looking for  
a:  
to be highlighted like :a, then that may be a bit of a problem, cause  
that  
is done within the Syntax Highlighting engine itself, not by code I  
implement into the system. It won’t know the difference between symbols  
that start with the colon, being the same as if they end with the colon.  
I  
will have to look into that.

Currently, I think that there is no editor or IDE that supports this new

> 

I’m hoping to replace FreeRIDE, Arachno Ruby IDE, and Mondrian IDE,  
since  
all three of these use the Fox Toolkit in their design, and I’ve seen  
them  
all (Except for Arachno, since that’s programmed in a different  
language),  
be consistently slow. Plus I’ll be adding more features, then what I’ve  
listed so far for wxRIDE. A lot more. The base design is going to be  
as a  
single Application, not a modular plugin interface. Plugins however  
will be  
available to enhance the IDE. If you want to keep tabs, or learn more,  
feel  
free to subscribe to the wxRIDE User’s Mailing List.

L8ers,

---

<div class="post-metadata">

**Author:** ![masoto](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/d2c977/32.png) [@masoto](https://www.ruby-forum.com/u/masoto)\
**Post date:** [March 2, 2008, 4:17am UTC](https://www.ruby-forum.com/t/wxride-finally-available/130666/6 "2008-03-02T04:17:35Z")

</div>

On 3/1/08, Alec R. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) wrote:

> Many thanks.

Your welcome.

Can it / will it be able to import and use XRC produced by other tools?

If you are refering to the RAD Tool, XRC Import will be available. But  
I  
have yet to start the actual initial design of the RAD Tool for it. My  
first goal, is to get Project Handling, Preferences, and Syntax  
Highlighting  
for other languages in first, as well as proabbly improving the code  
base,  
getting things straighten around, and concurrent. So bare with me on  
that.  
I’ve added Sean Lindsay as a developer as well, so he will be helping me  
out  
with wxRIDE.

I’m hopeful that people will find it interesting, and worthwhile, so  
that I  
can continue to progress the project further, and out beat other IDE’s  
that  
are currently out there for Ruby. But I’m always ambitious like that.  
LOL  
Anyways, More comments, and suggestions always welcome!

L8ers,

---

<div class="post-metadata">

**Author:** ![masoto](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/d2c977/32.png) [@masoto](https://www.ruby-forum.com/u/masoto)\
**Post date:** [March 14, 2008, 11:00pm UTC](https://www.ruby-forum.com/t/wxride-finally-available/130666/7 "2008-03-14T23:00:35Z")

</div>

Hello Again,

On 3/14/08, Chauk-Mean P [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) wrote:

> Hi again,
> 
> That’s sound great.
> 
> I just tried wxRIDE and it’s a really nice work.  
> The file explorer is great.  
> In fact, wxRIDE is already more useful than SciTE thanks to this file  
> explorer.

Thanks, I like to make things as easy as possible, yet natural to the  
interface of wxRIDE.

I understand that wxRIDE will be a full IDE.

> But what do you think about a light version of wxRIDE that would be  
> just an enhanced SciTE ?

Well, with the design of wxRIDE that I have planned, it will be modular,  
where you can have it as light as you want, or as feature rich as you  
want  
it. Unfortunatly, right now my concentration is on getting things  
together  
as I want them. Then I will go back through, and re-write it, in a more  
modular method, through Plugins, still leaving the Editor as it is, and  
expand the rest through Plugins.

Anyway, keep on your good work.

I plan on keeping up the good work, as I’ve had a lot of positive  
feedback  
from people, which is keeping me encouraged, and I’m liking the final  
result  
myself.

---

<div class="post-metadata">

**Author:** ![masoto](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/d2c977/32.png) [@masoto](https://www.ruby-forum.com/u/masoto)\
**Post date:** [March 14, 2008, 10:16pm UTC](https://www.ruby-forum.com/t/wxride-finally-available/130666/8 "2008-03-14T22:16:59Z")

</div>

Hi again,

2008/3/14, Mario S. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid):

> > Will you provide an archive file for wxRIDE for convenience in the future  
> > ?  
> > Anyway, I will have a look from my Linux box which has svn installed.
> 
> I will be providing a package, along with a Setup file, that will execute,  
> to ensure that everything that is needed is installed. But that will be  
> after I get the initial setup done for wxRIDE.

That’s sound great.

I just tried wxRIDE and it’s a really nice work.  
The file explorer is great.  
In fact, wxRIDE is already more useful than SciTE thanks to this file  
explorer.

> The base design is going to be as a  
> single Application, not a modular plugin interface. Plugins however will be  
> available to enhance the IDE.

I understand that wxRIDE will be a full IDE.  
But what do you think about a light version of wxRIDE that would be  
just an enhanced SciTE ?

Anyway, keep on your good work.

Cheers.

Chauk-Mean.

---

<div class="post-metadata">

**Author:** ![masoto](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/d2c977/32.png) [@masoto](https://www.ruby-forum.com/u/masoto)\
**Post date:** [April 1, 2008, 10:26am UTC](https://www.ruby-forum.com/t/wxride-finally-available/130666/9 "2008-04-01T10:26:01Z")

</div>

Hey Stone,

Thanks for the kind interest and support for wxRIDE. wxRIDE now has a  
User  
and Development list, and I’d prefer to keep chatter about wxRIDE  
limited to  
it’s own list. Just so you know, you can subcribe to them. As for your  
problem, the error is coming from the fact that your Ruby doesn’t set  
RUBY\_PATCHLEVEL for some reason, when it should be. If you don’t mind  
me  
asking, what version of Ruby are you running? You can find out by  
typing in  
ruby --version on a command line, and it’ll tell ya. If you could  
though,  
please reply to this email on removed\_email\_address@domain.invalid.

Thanks,

---

<div class="post-metadata">

**Author:** ![masoto](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/d2c977/32.png) [@masoto](https://www.ruby-forum.com/u/masoto)\
**Post date:** [April 1, 2008, 7:36am UTC](https://www.ruby-forum.com/t/wxride-finally-available/130666/10 "2008-04-01T07:36:42Z")

</div>

Well done on getting this project out. I like ruby (though I’m  
new), and I like wxWidgets, so I’m keen on getting this running.

I have ubuntu Linux running. I checked out the code with:  
root@opal:/home/rhys/wxride# svn checkout  
svn://rubyforge.org/var/svn/wxride/trunk

Then I cd into the trunk directory.  
Then try to run the program but get this error:

root@opal:/home/stone/wxride# cd trunk/  
root@opal:/home/stone/wxride/trunk# ruby wxRIDE.rb  
./lib/ui/AboutDialog.rb:13: uninitialized constant  
WxRide::AboutDialog::RUBY\_PATCHLEVEL (NameError)  
from /usr/lib/ruby/1.8/rubygems/custom\_require.rb:27:in  
`gem_original_require' from /usr/lib/ruby/1.8/rubygems/custom_require.rb:27:in`require’  
from wxRIDE.rb:94  
root@opal:/home/stone/wxride/trunk#

Is any kind and wise soul able to tell me how to resolve this?

Many thanks,  
StonePiano
