# USRP2 - 25MS/s\]

**URL:** <https://www.ruby-forum.com/t/usrp2-25ms-s/155155>\
**Category:** GNU Radio\
**Created:** [December 8, 2008, 8:11pm UTC](https://www.ruby-forum.com/t/usrp2-25ms-s/155155 "2008-12-08T20:11:18Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![dgalindo](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/d/b38774/32.png) [@dgalindo](https://www.ruby-forum.com/u/dgalindo)\
**Post date:** [December 8, 2008, 8:11pm UTC](https://www.ruby-forum.com/t/usrp2-25ms-s/155155/1 "2008-12-08T20:11:18Z")

</div>

Looks like I failed to copy the list. To expand a little more on this -  
setting decimation rates less than 8 with the current code on my machine  
results in a screen-full of 'S’s, and I still see them occasionally  
with decim = 8. Right now I’m experimenting with usrp2\_rx\_file.py to  
record the 25MS/s to a dumpfile, and then try processing them offline.  
Doug

-------- Original Message --------  
Subject: Re: [Discuss-gnuradio] USRP2 - 25MS/s  
Date: Fri, 05 Dec 2008 16:36:43 -0600  
From: Douglas G. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)  
To: Matt E. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)  
References: [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)  
[removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)

Matt E. wrote:

> 25 MS/s is a very high data rate to keep up with. If you were to just  
> run a 40 tap FIR filter you would easily be eating up half of a  
> processor. I haven’t looked at it, but the 802.11b code is bound to use  
> more processing than the fft display does.
> 
> Does the bbn code accept other decimation rates? you could try 5 or 6.
> 
> Matt

Makes sense - I knew that was a lot of data. It does look like I’m using  
70% of cpu with decim = 8. I’ll try decimation rates in-between - I  
think the main thing that would need changing in that case is the  
samples per bit.  
Doug

–  
Doug G.  
Research Assistant  
Communications and Signal Processing Lab  
Oklahoma State University  
[http://cspl.okstate.edu](http://cspl.okstate.edu)  
removed\_email\_address@domain.invalid  
removed\_email\_address@domain.invalid

–  
Doug G.  
Research Assistant  
Communications and Signal Processing Lab  
Oklahoma State University  
[http://cspl.okstate.edu](http://cspl.okstate.edu)  
removed\_email\_address@domain.invalid  
removed\_email\_address@domain.invalid
