# USRP IP Address

**URL:** <https://www.ruby-forum.com/t/usrp-ip-address/236036>\
**Category:** GNU Radio\
**Created:** [August 1, 2013, 9:37am UTC](https://www.ruby-forum.com/t/usrp-ip-address/236036 "2013-08-01T09:37:17Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![alcina](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/a/a587f6/32.png) [@alcina](https://www.ruby-forum.com/u/alcina)\
**Post date:** [August 1, 2013, 9:37am UTC](https://www.ruby-forum.com/t/usrp-ip-address/236036/1 "2013-08-01T09:37:17Z")

</div>

Dears,  
i  
Have USRPn210 with SBX daugtherboard. I installed the gnuradio and Uhd.  
But have problem that the PC not see the USRP. i edit the ips to make  
the device 192.168.10.2 and same problem. so, can any one help me to  
connect the USRP with the PC( the IP , DNS, and the Default gatway).

Best Regards,  
M.Ramadan

---

<div class="post-metadata">

**Author:** ![mrashi12](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/e5b9ba/32.png) [@mrashi12](https://www.ruby-forum.com/u/mrashi12)\
**Post date:** [August 1, 2013, 9:51am UTC](https://www.ruby-forum.com/t/usrp-ip-address/236036/2 "2013-08-01T09:51:19Z")

</div>

The last device I received did not appear to have the correct IP set  
from the factory.

I had to reset using the “Device recovery and bricking” procedure here:

[http://files.ettus.com/uhd\_docs/manual/html/usrp2.html#load-the-images-onto-the-on-board-flash-usrp-n-series-only](http://files.ettus.com/uhd_docs/manual/html/usrp2.html#load-the-images-onto-the-on-board-flash-usrp-n-series-only)

and set the IP using the “Change the USRP2’s IP address” section from  
the same page.

On Thu, Aug 01, 2013 at 12:35:42AM -0700, Mohammed R. wrote:

> M.Ramadan