# UHD build apparently failed **URL:** \ **Category:** GNU Radio\ **Created:** [March 22, 2014, 2:42am UTC](https://www.ruby-forum.com/t/uhd-build-apparently-failed/239972 "2014-03-22T02:42:11Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![Detlef\_R](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/d/58f4c7/32.png) [@Detlef\_R](https://www.ruby-forum.com/u/Detlef_R)\ **Post date:** [March 22, 2014, 2:42am UTC](https://www.ruby-forum.com/t/uhd-build-apparently-failed/239972/1 "2014-03-22T02:42:11Z")
As I am installing GNU Radio from this link: [http://blogs.bu.edu/mhirsch/2012/07/installing-gnu-radio-in-ubuntu-12-04-x64/comment-page-1/](http://blogs.bu.edu/mhirsch/2012/07/installing-gnu-radio-in-ubuntu-12-04-x64/comment-page-1/) (which installs GNU Radio & UHD ) I got the following error , what can i do ? Thanks 🙂 [26%] Building CXX object lib/CMakeFiles/uhd.dir/transport/nirio/rpc/rpc\_client.cpp.o /home/dell/GNUradio/uhd/host/lib/transport/nirio/rpc/rpc\_client.cpp: In constructor ‘uhd::usrprio\_rpc::rpc\_client::rpc\_client(const string&, const string&, uint32\_t, uint32\_t)’: /home/dell/GNUradio/uhd/host/lib/transport/nirio/rpc/rpc\_client.cpp:51:9: error: ‘connect’ is not a member of ‘boost::asio’ /home/dell/GNUradio/uhd/host/lib/transport/nirio/rpc/rpc\_client.cpp:51:9: note: suggested alternatives: /usr/include/x86\_64-linux-gnu/sys/socket.h:129:12: note: ‘connect’ /usr/include/boost/asio/detail/impl/socket\_ops.ipp:383:5: note: ‘boost::asio::detail::socket\_ops::connect’ make[2]: \*\*\* [lib/CMakeFiles/uhd.dir/transport/nirio/rpc/rpc\_client.cpp.o] Error 1 make[1]: \*\*\* [lib/CMakeFiles/uhd.dir/all] Error 2 make: \*\*\* [all] Error 2 UHD build apparently failed Exiting UHD build Send success/fail info to [sbrac.org](http://sbrac.org)? ---
**Author:** ![Sara\_ChSSrif](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/7ba0ec/32.png) [@Sara\_ChSSrif](https://www.ruby-forum.com/u/Sara_ChSSrif)\ **Post date:** [March 22, 2014, 2:56am UTC](https://www.ruby-forum.com/t/uhd-build-apparently-failed/239972/2 "2014-03-22T02:56:47Z")
On 03/21/2014 09:40 PM, Sara C. wrote: > /home/dell/GNUradio/uhd/host/lib/transport/nirio/rpc/rpc\_client.cpp:51:9: > UHD build apparently failed > Exiting UHD build > Send success/fail info to [sbrac.org](http://sbrac.org) [http://sbrac.org](http://sbrac.org)? > > * * * > > Discuss-gnuradio mailing list > [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) > [Discuss-gnuradio Info Page](https://lists.gnu.org/mailman/listinfo/discuss-gnuradio) > I see the same problem on Fedora 14, and even when I specify: -DENABLE\_X300=OFF In the cmake, I still see this build failure due to nirio requiring a newer boost. Ben/Michael have you a comment? ---
**Author:** ![Sara\_ChSSrif](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/7ba0ec/32.png) [@Sara\_ChSSrif](https://www.ruby-forum.com/u/Sara_ChSSrif)\ **Post date:** [March 23, 2014, 3:24pm UTC](https://www.ruby-forum.com/t/uhd-build-apparently-failed/239972/3 "2014-03-23T15:24:35Z")
Hi Marcus, Sara I think I fixed this somewhen back in december, when RHEL6 support broke. Which branch (tag) are you building off? UHD 3.7.0 (master) should have those changes. Cheers, Moritz ---
**Author:** ![Sara\_ChSSrif](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/7ba0ec/32.png) [@Sara\_ChSSrif](https://www.ruby-forum.com/u/Sara_ChSSrif)\ **Post date:** [March 23, 2014, 3:26pm UTC](https://www.ruby-forum.com/t/uhd-build-apparently-failed/239972/4 "2014-03-23T15:26:21Z")
On 03/23/2014 10:23 AM, Moritz Fischer wrote: > Hi Marcus, Sara > > I think I fixed this somewhen back in december, when RHEL6 support broke. > Which branch (tag) are you building off? UHD 3.7.0 (master) should > have those changes. > > Cheers, > > Moritz Here’s a bit of git log of what I’m building: commit a8caec5f93976c081d488118f53a72dca49efdf6 Author: Ashish C. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) Date: Wed Feb 19 19:22:52 2014 -0800 ``` b200: Fixed bug in rx_dsp_core_3000 that would assume 3 halfbands ``` and X300 s commit 7fef199d194c9a63b3312845979fa353f90f4d23 Author: Nicholas C. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) Date: Fri Feb 14 06:49:10 2014 -0800 ``` Updated images URL to UHD 3.7.0 images ``` commit ebf1f1780d692c25e445b4df1c19d01ba43d6a94 Author: Ben H. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) Date: Thu Feb 13 17:30:24 2014 -0800 ``` Putting the ICMP destination unreachable fix in X300 firmware. ``` commit ff1546f8137f7f92bb250f685561b0c34cc0e053 Author: Ben H. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) Date: Fri Feb 14 12:05:07 2014 -0800 ``` Pushing the bulk of UHD-3.7.0 code. ``` ---
**Author:** ![Sara\_ChSSrif](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/7ba0ec/32.png) [@Sara\_ChSSrif](https://www.ruby-forum.com/u/Sara_ChSSrif)\ **Post date:** [March 23, 2014, 5:10pm UTC](https://www.ruby-forum.com/t/uhd-build-apparently-failed/239972/5 "2014-03-23T17:10:19Z")
Hi Marcus, On Sun, Mar 23, 2014 at 3:24 PM, Marcus D. Leech [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) wrote: > Here’s a bit of git log of what I’m building: > > commit a8caec5f93976c081d488118f53a72dca49efdf6 > Author: Ashish C. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) > Date: Wed Feb 19 19:22:52 2014 -0800 > > ``` > b200: Fixed bug in rx_dsp_core_3000 that would assume 3 halfbands and > > ``` > > X300 s Crap, that’s 7 commits down from the fix in our internal master. I’ll see if I can get stuff pushed tomorrow. In the meantime you can try the attached patch. Happy hacking, Moritz ---
**Author:** ![Sara\_ChSSrif](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/7ba0ec/32.png) [@Sara\_ChSSrif](https://www.ruby-forum.com/u/Sara_ChSSrif)\ **Post date:** [March 23, 2014, 7:43pm UTC](https://www.ruby-forum.com/t/uhd-build-apparently-failed/239972/6 "2014-03-23T19:43:55Z")
boost::container is quite new (introduced in 1.48 afaik); I’m pulling master right now, but boost::container::vector should be STL-compatible. replace the incluse by #include and try 😉 ---
**Author:** ![Sara\_ChSSrif](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/7ba0ec/32.png) [@Sara\_ChSSrif](https://www.ruby-forum.com/u/Sara_ChSSrif)\ **Post date:** [March 23, 2014, 6:12pm UTC](https://www.ruby-forum.com/t/uhd-build-apparently-failed/239972/7 "2014-03-23T18:12:14Z")
On 03/23/2014 12:08 PM, Moritz Fischer wrote: > Moritz > It got further, the nirio stuff made it past, but, then: /home/mleech/uhd/host/include/uhd/transport/nirio/nirio\_fifo.ipp:377:24: warning: expected [error|warning|ignored] after ‘#pragma GCC diagnostic’ [44%] Building CXX object lib/CMakeFiles/uhd.dir/usrp/dboard\_base.cpp.o [44%] Building CXX object lib/CMakeFiles/uhd.dir/usrp/dboard\_eeprom.cpp.o [44%] Building CXX object lib/CMakeFiles/uhd.dir/usrp/dboard\_id.cpp.o [45%] Building CXX object lib/CMakeFiles/uhd.dir/usrp/dboard\_iface.cpp.o [45%] Building CXX object lib/CMakeFiles/uhd.dir/usrp/dboard\_manager.cpp.o [46%] Building CXX object lib/CMakeFiles/uhd.dir/usrp/gps\_ctrl.cpp.o /home/mleech/uhd/host/lib/usrp/gps\_ctrl.cpp:33:38: fatal error: boost/container/vector.hpp: No such file or directory compilation terminated. make[2]: \*\*\* [lib/CMakeFiles/uhd.dir/usrp/gps\_ctrl.cpp.o] Error 1 make[1]: \*\*\* [lib/CMakeFiles/uhd.dir/all] Error 2 make: \*\*\* [all] Error 2 ---
**Author:** ![Sara\_ChSSrif](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/7ba0ec/32.png) [@Sara\_ChSSrif](https://www.ruby-forum.com/u/Sara_ChSSrif)\ **Post date:** [March 23, 2014, 8:00pm UTC](https://www.ruby-forum.com/t/uhd-build-apparently-failed/239972/8 "2014-03-23T20:00:17Z")
Hi Marcuses, on my machine it builds without the include. Can you confirm that? Cheers, Moritz ---
**Author:** ![Sara\_ChSSrif](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/7ba0ec/32.png) [@Sara\_ChSSrif](https://www.ruby-forum.com/u/Sara_ChSSrif)\ **Post date:** [March 23, 2014, 7:59pm UTC](https://www.ruby-forum.com/t/uhd-build-apparently-failed/239972/9 "2014-03-23T19:59:42Z")
On 03/23/2014 02:42 PM, Marcus M. wrote: > boost::container is quite new (introduced in 1.48 afaik); I’m pulling > master right now, but boost::container::vector should be STL-compatible. > replace the incluse by #include and try 😉 > That got me past gps\_ctrl.cpp, but now: /home/mleech/uhd/host/lib/usrp/common/adf435x\_common.cpp: In function ‘adf435x\_tuning\_settings tune\_adf435x\_synth(double, double, const adf435x\_tuning\_constraints&, double&)’: /home/mleech/uhd/host/lib/usrp/common/adf435x\_common.cpp:81:29: error: ‘floor’ is not a member of ‘std’ /home/mleech/uhd/host/lib/usrp/common/adf435x\_common.cpp:128:66: error: ‘ceil’ is not a member of ‘std’ make[2]: \*\*\* [lib/CMakeFiles/uhd.dir/usrp/common/adf435x\_common.cpp.o] Error 1 make[1]: \*\*\* [lib/CMakeFiles/uhd.dir/all] Error 2 make: \*\*\* [all] Error 2 That stuff used to work just fine with my older (F14) system here. Frustrating. ---
**Author:** ![Sara\_ChSSrif](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/7ba0ec/32.png) [@Sara\_ChSSrif](https://www.ruby-forum.com/u/Sara_ChSSrif)\ **Post date:** [March 24, 2014, 12:10am UTC](https://www.ruby-forum.com/t/uhd-build-apparently-failed/239972/10 "2014-03-24T00:10:49Z")
Confirmed, fc19, boost 1.53.0 ---
**Author:** ![Sara\_ChSSrif](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/7ba0ec/32.png) [@Sara\_ChSSrif](https://www.ruby-forum.com/u/Sara_ChSSrif)\ **Post date:** [March 24, 2014, 12:13am UTC](https://www.ruby-forum.com/t/uhd-build-apparently-failed/239972/11 "2014-03-24T00:13:10Z")
On 03/23/2014 07:08 PM, Marcus M. wrote: > This calls for #include ; I wonder how that is working on my f19 > Yup, that took care of it. Then there’s the b200\_iface.cpp problem with libusb on my system not having libusb\_error\_name, so I had to copy the macro from transport/zero\_copy that’s conditional on HAVE\_LIBUSB\_ERROR\_NAME, and it all compiled just fine. ---
**Author:** ![Sara\_ChSSrif](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/7ba0ec/32.png) [@Sara\_ChSSrif](https://www.ruby-forum.com/u/Sara_ChSSrif)\ **Post date:** [March 24, 2014, 12:09am UTC](https://www.ruby-forum.com/t/uhd-build-apparently-failed/239972/12 "2014-03-24T00:09:39Z")
This calls for #include ; I wonder how that is working on my f19 ---
**Author:** ![Sara\_ChSSrif](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/7ba0ec/32.png) [@Sara\_ChSSrif](https://www.ruby-forum.com/u/Sara_ChSSrif)\ **Post date:** [March 24, 2014, 8:55am UTC](https://www.ruby-forum.com/t/uhd-build-apparently-failed/239972/13 "2014-03-24T08:55:59Z")
Hi all, thanks for testing. Parts of that is already internally fixed on our branches for the rest I created patches. I expect this to be pushed to the public master in the next days. Thanks for hanging in there, Moritz