# Terminator 0.4.4 **URL:** \ **Category:** Ruby\ **Created:** [September 21, 2008, 3:50am UTC](https://www.ruby-forum.com/t/terminator-0-4-4/149128 "2008-09-21T03:50:59Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![Mikel\_L](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/2bfe46/32.png) [@Mikel\_L](https://www.ruby-forum.com/u/Mikel_L)\ **Post date:** [September 21, 2008, 3:50am UTC](https://www.ruby-forum.com/t/terminator-0-4-4/149128/1 "2008-09-21T03:50:59Z")
NAME Terminator SYNOPSIS An external timeout mechanism based on processes and signals. Safe for system calls. Safe for minors. but not very safe for misbehaving, downtrodden zombied out processes. CHANGES Major change since 0.4.2 was making Terminator loop safe, that is, you can now run Terminator inside a loop without getting conflicts. Also added RDoc and more specs. DESCRIPTION Terminator is a solution to the problem of ‘how am I meant to kill a system call in Ruby!?’ Ruby (at least MRI) uses green threads to “multitask”. This means that there is really only ever one ruby process running which then splits up it’s processor time between all of it’s threads internally. The processor then only has to deal with one ruby process and the ruby process deals with all it’s threads. There are pros and cons to this method, but that is not the point of this library. The point is, that if you make a system call to an external resource from ruby, then the kernel will go and make that call for ruby and NOT COME BACK to ruby until that system call completes or fails. This can take a very long time and is why your feeble attempts at using ruby’s internal “Timeout” command has failed miserably at timing out your external web service, database or network connections. You see, Ruby just doesn’t get a chance to do anything as the kernel goes “I’m not going to talk to you again until your system calls complete”. Sort of a no win situation for Ruby. That’s where Terminator comes in. Like Arnie, he will come back. No matter what, and complete his mission, unless he gets aborted before his timeout, you can trust Terminator to thoroughly and without remorse, nuke your misbehaving and timing out ruby processes efficiently, and quickly. HOW IT WORKS Basically we create a new terminator ruby process, separate to the existing running ruby process that has a simple command of sleep for x seconds, and then do a process TERM on the PID of the original ruby process that created it. If your process finishes before the timeout, it will kill the Terminator first. So really it is a race of who is going to win? Word of warning though. Terminator is not subtle. Don’t expect it to split hairs. Trying to give a process that takes about 1 second to complete, a 2 second terminator… well… odds are 50/50 on who is going to make it. If you have a 1 second process, give it 3 seconds to complete. Arnie doesn’t much care for casualties of war. Another word of warning, if using Terminator inside a loop, it is possible to exceed your open file limit. I have safely tested looping 1000 times INSTALL gem install terminator URIS [http://codeforpeople.com/lib/ruby](http://codeforpeople.com/lib/ruby) [http://rubyforge.org/projects/codeforpeople](http://rubyforge.org/projects/codeforpeople) HISTORY 0.4.2 \* initial version (ara) 0.4.3 \* added some extra specs and test cases and minor fixes (mikel) 0.4.4 \* made terminator loop safe. 1000.times { Terminator.timeout(1) do true; end } now works (mikel) \* added more test cases (mikel) \* added rdoc (mikel) AUTHORS ara.t.howard - removed\_email\_address@domain.invalid mikel lindsaar - removed\_email\_address@domain.invalid SAMPLES \<========\< samples/a.rb \>========\> ~ \> cat samples/a.rb ``` require 'terminator' Terminator.terminate 2 do sleep 4 end ``` ~ \> ruby samples/a.rb ``` samples/a.rb:3: 2s (Terminator::Error) from samples/a.rb:3 ``` \<========\< samples/b.rb \>========\> ~ \> cat samples/b.rb ``` require 'terminator' Terminator.terminate 0.2 do sleep 0.4 rescue puts 'timed out!' end ``` ~ \> ruby samples/b.rb ``` timed out! ``` \<========\< samples/c.rb \>========\> ~ \> cat samples/c.rb ``` require 'terminator' begin Terminator.terminate :seconds => 0.2 do sleep 0.4 end rescue Terminator.error puts 'timed out!' end ``` ~ \> ruby samples/c.rb ``` timed out! ``` \<========\< samples/d.rb \>========\> ~ \> cat samples/d.rb ``` require 'terminator' trap = lambda{ puts "signaled @ #{ Time.now.to_i }" } Terminator.terminate :seconds => 1, :trap => trap do sleep 2 puts "woke up @ #{ Time.now.to_i }" end ``` ~ \> ruby samples/d.rb ``` signaled @ 1221026177 woke up @ 1221026178 ``` \<========\< samples/e.rb \>========\> ~ \> cat samples/e.rb ``` require 'terminator' puts "Looping 1000 times on the terminator..." success = false 1.upto(1000) do |i| success = false Terminator.terminate(1) do success = true end print "\b\b\b#{i}" end puts "\nI was successful" if success ``` ~ \> ruby samples/e.rb ``` Looping 1000 times on the terminator... 1000 I was successful ```