# Ruby on Rails application scope

**URL:** <https://www.ruby-forum.com/t/ruby-on-rails-application-scope/134708>\
**Category:** Rails\
**Created:** [April 14, 2008, 10:35am UTC](https://www.ruby-forum.com/t/ruby-on-rails-application-scope/134708 "2008-04-14T10:35:04Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![juan](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/a698b9/32.png) [@juan](https://www.ruby-forum.com/u/juan)\
**Post date:** [April 14, 2008, 10:35am UTC](https://www.ruby-forum.com/t/ruby-on-rails-application-scope/134708/1 "2008-04-14T10:35:04Z")

</div>

Dear all,

I am developing a ruby on rails application where I must get some  
information from a third party application using HTTP request. This  
information is seamlessly static (more less 30 minutes) so I would  
like to get it once and use it during the next 30 minutes.

Is there an application scope (higher than session) where I can store  
this information?

Thanks in advance.

Juan

---

<div class="post-metadata">

**Author:** ![juan](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/a698b9/32.png) [@juan](https://www.ruby-forum.com/u/juan)\
**Post date:** [April 14, 2008, 11:07am UTC](https://www.ruby-forum.com/t/ruby-on-rails-application-scope/134708/2 "2008-04-14T11:07:01Z")

</div>

Hi,

> information is seamlessly static (more less 30 minutes) so I would  
> like to get it once and use it during the next 30 minutes.
> 
> Is there an application scope (higher than session) where I can store  
> this information?

There are different approaches to this. If you are running a single  
rails server, then you can put the contents directly in a class  
variable. If you are running in production mode, your class variables  
will keep their values (until you change it or until you restart your  
server). Keep in mind that if you stop your server, the next time you  
are checking the variable will have nil value and you will have to ask  
it from the remote site again.

If you are running a cluster of rails servers, then you can do one of  
three things. One would be keeping the results in a file and then  
reading the contents of the file each time. You could also keep the  
contents in a file, and then load the contents of the file to a class  
variable. In this case you would be loading a local copy in each of your  
servers. These two approaches are feasible, but has some problems. One  
is the file must be available from every rails server. If they are in  
the same machine, all is fine, but if you are deploying over several  
boxes, then you have to configure a shared directory. Another potential  
problem is that, since you are caching contents locally for each server,  
if you are talking about a big file, then you could be using a  
significant amount of memory.

For multiple rails servers, I would recommend using a distributed cache,  
such as memcached. That way, you only cache the contents once, and you  
can access from any box as long as you have network connectivity between  
them.

Regards,

javier ramírez

---

<div class="post-metadata">

**Author:** ![juan](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/a698b9/32.png) [@juan](https://www.ruby-forum.com/u/juan)\
**Post date:** [April 14, 2008, 11:38am UTC](https://www.ruby-forum.com/t/ruby-on-rails-application-scope/134708/3 "2008-04-14T11:38:40Z")

</div>

Hi again,

of course if what you are getting from a remote location is something  
you are going to render directly in a view, you can just cache the  
page/action and that would be all.

and if what you are getting is not something to render but values (like  
quotes or prices, for example), then where i said “file” in my previous  
mail, you can also read “db table”, which is probably easier.

regards,

javier ramírez

---

<div class="post-metadata">

**Author:** ![juan](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/a698b9/32.png) [@juan](https://www.ruby-forum.com/u/juan)\
**Post date:** [April 14, 2008, 1:21pm UTC](https://www.ruby-forum.com/t/ruby-on-rails-application-scope/134708/4 "2008-04-14T13:21:35Z")

</div>

Thanks Javier.

I must keep information about a list of elements (similar to RSS), so  
I think the best solution is a memory based one.

My problem was that using development environment the class variable  
is always refreshed. I have changed to production mode and now the  
value is kept between requests (I have done a mock test with  
Time.now). What I must solve now is the refresh logic, is there any  
solution to do that automatically? Something like a scheduler?.

Thanks so much

Juan