# RmtObj release

**URL:** <https://www.ruby-forum.com/t/rmtobj-release/137697>\
**Category:** Ruby\
**Created:** [May 15, 2008, 1:13pm UTC](https://www.ruby-forum.com/t/rmtobj-release/137697 "2008-05-15T13:13:36Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![takashi\_noma](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/t/dbc845/32.png) [@takashi\_noma](https://www.ruby-forum.com/u/takashi_noma)\
**Post date:** [May 15, 2008, 1:13pm UTC](https://www.ruby-forum.com/t/rmtobj-release/137697/1 "2008-05-15T13:13:36Z")

</div>

Hi All,

I released ‘RmtObj’ library on my web-site,which address shown below.

[http://amon.dip.jp/index.php?RmtObj\_English](http://amon.dip.jp/index.php?RmtObj_English)

‘RmtObj’ is a platform, which enables you to control the ruby object  
placed on the web-server. Transferred ruby object will run on the  
web-server, but you can control it as if it is on the local machine.

RmtObj is very similar to dRuby, but differ from it mainly following  
points.

- You don’t need to run ruby process on the web-server. RmtObj will run  
in CGI process.
- One RmtObj server can handle multiple object.
- RmtObj can’t use block method.

When you use dRuby through the Internet, you need to open the specified  
port of the server to the Internet. But, RmtObj only need HTTP or HTTPS  
port. So, you may control the ruby object on the web-server through  
strict proxy-server.

If you are interested in ‘RmtObj’, please check it out!

Thank you,

Takashi Noma