# Reset() for probe\_avg\_mag\_sqrd **URL:** \ **Category:** GNU Radio\ **Created:** [August 2, 2014, 7:51pm UTC](https://www.ruby-forum.com/t/reset-for-probe-avg-mag-sqrd/231314 "2014-08-02T19:51:57Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![addis\_a](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/a/c4cdca/32.png) [@addis\_a](https://www.ruby-forum.com/u/addis_a)\ **Post date:** [August 2, 2014, 7:51pm UTC](https://www.ruby-forum.com/t/reset-for-probe-avg-mag-sqrd/231314/1 "2014-08-02T19:51:57Z")
Hello, my application is monitoring the RF level and often changeing the frequency. Unfortunately it takes some time for probe\_avg\_mag\_sqrd to adjust to the new RF level (about 2 seconds if old level -10dB and new level -40dB). I found out the the iir-filter probe\_avg\_mag\_sqrd uses has a reset function, so all I did was adding a reset-function in probe\_avg\_mag\_sqrd to call it and it seems so work fine. Is there any reason probe\_avg\_mag\_sqrd doesn´t have a reset function yet? Is there some problem I don´t see? In case not, could that be added in official GNURadio? Otherwise my application would only work with modified GNURadio (or I would need to include my modified probe\_avg\_mag\_sqrd with a new name in my appliaction). I would prefer to have this feature in official GNURadio, as it´s probably useful for somebody else as well. Best regards Stefan Note: I´m not sending a patch because it´s just 3 lines of code and I don´t know Python, so somebody else would have to complete it anyway. ---
**Author:** ![Stefan\_O](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/a8b319/32.png) [@Stefan\_O](https://www.ruby-forum.com/u/Stefan_O)\ **Post date:** [August 4, 2014, 11:06am UTC](https://www.ruby-forum.com/t/reset-for-probe-avg-mag-sqrd/231314/2 "2014-08-04T11:06:41Z")
Stefan, this might be useful, can you post an issue on [gnuradio.org](http://gnuradio.org), and describe as clearly as possible what you need? A patch, even if small, also helps to make things clearer for us. M ---
**Author:** ![Stefan\_O](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/a8b319/32.png) [@Stefan\_O](https://www.ruby-forum.com/u/Stefan_O)\ **Post date:** [August 21, 2014, 7:44pm UTC](https://www.ruby-forum.com/t/reset-for-probe-avg-mag-sqrd/231314/3 "2014-08-21T19:44:38Z")
Hi, I posted the issue with a patch about 2 weeks ago, I´m not sure anybody has seen it yet: [http://gnuradio.org/redmine/issues/709](http://gnuradio.org/redmine/issues/709) Would be great if it could be included. Thanks Stefan Am 04.08.2014 11:05, schrieb Martin B.: ---
**Author:** ![Stefan\_O](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/a8b319/32.png) [@Stefan\_O](https://www.ruby-forum.com/u/Stefan_O)\ **Post date:** [August 22, 2014, 12:10pm UTC](https://www.ruby-forum.com/t/reset-for-probe-avg-mag-sqrd/231314/4 "2014-08-22T12:10:41Z")
Stefan, Johnathan asked you a couple of questions regarding your patch. I’m not sure if you’ve already answered him, but the usual approach here is that we continue patch-related discussions on the issue tracker. So what it looks like from here is that’s actually stalling on you 🙂 Once things are in the issue tracker, they don’t get forgotten. However, sometimes it takes longer to merge/address things. Hope this doesn’t discourage you or any other contributor. Cheers, M ---
**Author:** ![Stefan\_O](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/a8b319/32.png) [@Stefan\_O](https://www.ruby-forum.com/u/Stefan_O)\ **Post date:** [September 18, 2014, 4:48pm UTC](https://www.ruby-forum.com/t/reset-for-probe-avg-mag-sqrd/231314/5 "2014-09-18T16:48:34Z")
On 09/18/2014 10:29 AM, Stefan O. wrote: > fatal: git-http-push failed > You should make a clone of the gnuradio on github under your github > account, then push your work to a branch there so people can look at it. Only a few people can push to the main gnuradio repository. Philip ---
**Author:** ![Stefan\_O](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/a8b319/32.png) [@Stefan\_O](https://www.ruby-forum.com/u/Stefan_O)\ **Post date:** [September 18, 2014, 4:44pm UTC](https://www.ruby-forum.com/t/reset-for-probe-avg-mag-sqrd/231314/6 "2014-09-18T16:44:15Z")
Hi, I´m sorry, I just looked at that issue just before writing that mail, he must have updated that while I was writing the mail. And no, I was not discouraged, I´ve been on holiday the last weeks, that´s why I did not response the last weeks. Anyway, I created a git branch like requested, I never really worked with gut before, so I just followed a guide, but in the last step I´ll get an error: Cannot access URL [gnuradio.git - GNU Radio](http://gnuradio.org/git/gnuradio.git/), return code 22 fatal: git-http-push failed What am I doing wrong? Do I need somekind of login data? I set my name and email using git config, but I was never asked for username/password? Best regards Stefan Am 22.08.2014 12:09, schrieb Martin B.: