# Release plan

**URL:** <https://www.ruby-forum.com/t/release-plan/136449>\
**Category:** Ruby-Gnome 2\
**Created:** [May 2, 2008, 7:35am UTC](https://www.ruby-forum.com/t/release-plan/136449 "2008-05-02T07:35:45Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kouhei\_S](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/k/f4b2a3/32.png) [@Kouhei\_S](https://www.ruby-forum.com/u/Kouhei_S)\
**Post date:** [May 2, 2008, 7:35am UTC](https://www.ruby-forum.com/t/release-plan/136449/1 "2008-05-02T07:35:45Z")

</div>

Hi,

Joachim, could you show us your release plan?

What are problems that block new release? Can we solve the problems  
as soon as possible?

## Thanks,

kou

---

<div class="post-metadata">

**Author:** ![Kouhei\_S](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/k/f4b2a3/32.png) [@Kouhei\_S](https://www.ruby-forum.com/u/Kouhei_S)\
**Post date:** [May 5, 2008, 1:56pm UTC](https://www.ruby-forum.com/t/release-plan/136449/2 "2008-05-05T13:56:17Z")

</div>

Kouhei S. wrote:  
Hi,

> Joachim, could you show us your release plan?
> 
> What are problems that block new release? Can we solve the problems  
> as soon as possible?

- gstreamer bindings. I saw a few patches but I’m not up to date on  
current status. The test script gives me some errors using r3188 (see  
attachment)

- If gstreamer bindings are ok, I’ll ask Shin guey Wong to try if it  
compiles on windows platform.

- gtk and glib automated test scripts fail for me. Please check this.

---

<div class="post-metadata">

**Author:** ![Kouhei\_S](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/k/f4b2a3/32.png) [@Kouhei\_S](https://www.ruby-forum.com/u/Kouhei_S)\
**Post date:** [May 7, 2008, 4:28pm UTC](https://www.ruby-forum.com/t/release-plan/136449/3 "2008-05-07T16:28:57Z")

</div>

Hi,

In [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)  
“Re: [ruby-gnome2-devel-en] Release plan” on Mon, 5 May 2008 13:56:17  
+0200,  
Joachim G. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) wrote:

> > Joachim, could you show us your release plan?
> > 
> > What are problems that block new release? Can we solve the problems  
> > as soon as possible?
> 
> - gstreamer bindings.

Ruby/GStreamer is an experimental package for now. So you  
don’t need to wait the package. It’s OK if the package is  
just buildable.

> ```
> I saw a few patches but I'm not up to date on 
> 
> ```
> 
> current status.

I think that I had merged those patches a month ago.

> ```
> The test script gives me some errors using r3188 (see 
> 
> ```
> 
> attachment)

Could you show us the followings?:

- your GStreamer version.
- your GStreamer’s plugins version.
- a result of ‘gst-inspect-0.10 playbin’.
- a result of ‘gst-inspect-0.10 playback’.
- a result of ‘gst-inspect-0.10 identity’.

> - gtk and glib automated test scripts fail for me. Please check this.

They aren’t failed on my environment. (GLib 2.16.3 and GTK+ 2.12.9)  
Could you show us their versions and test result on your  
environment.

## Thanks,

kou

---

<div class="post-metadata">

**Author:** ![Kouhei\_S](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/k/f4b2a3/32.png) [@Kouhei\_S](https://www.ruby-forum.com/u/Kouhei_S)\
**Post date:** [May 7, 2008, 5:08pm UTC](https://www.ruby-forum.com/t/release-plan/136449/4 "2008-05-07T17:08:36Z")

</div>

Kouhei S. wrote:

> Could you show us the followings?:
> 
> - your GStreamer version.
> - your GStreamer’s plugins version.

I’ve installed these packages (ubuntu 7.10)

libgstreamer0.10-0: 0.10.14-1ubuntu3  
libgstreamer-plugins-base0.10-0: 0.10.14-1ubuntu3  
gstreamer0.10-plugins-base: 0.10.14-1ubuntu3  
gstreamer0.10-plugins-good: 0.10.6-0ubuntu4

> - a result of ‘gst-inspect-0.10 playbin’.
> - a result of ‘gst-inspect-0.10 playback’.
> - a result of ‘gst-inspect-0.10 identity’.  
> Will install gst-inspect and send the outputs tomorrow, i’m a bit on a  
> hurry now.

> > - gtk and glib automated test scripts fail for me. Please check this.
> 
> They aren’t failed on my environment. (GLib 2.16.3 and GTK+ 2.12.9)  
> Could you show us their versions and test result on your  
> environment.

libglib: 2.14.1-1ubuntu1  
libgtk: 2.12.0-1ubuntu3

---

<div class="post-metadata">

**Author:** ![Kouhei\_S](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/k/f4b2a3/32.png) [@Kouhei\_S](https://www.ruby-forum.com/u/Kouhei_S)\
**Post date:** [May 12, 2008, 4:02pm UTC](https://www.ruby-forum.com/t/release-plan/136449/5 "2008-05-12T16:02:11Z")

</div>

Kouhei S. wrote:

> I can’t fix problems happened on your environment without  
> your test result. Does anyone fail test on trunk?

Hi Kouhei,

I made a small script for running all the tests (run\_tests.rb), which i  
added to trunk.  
See attachment for test output at trunk revision 3191 on my machine.

---

<div class="post-metadata">

**Author:** ![Kouhei\_S](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/k/f4b2a3/32.png) [@Kouhei\_S](https://www.ruby-forum.com/u/Kouhei_S)\
**Post date:** [May 13, 2008, 5:29am UTC](https://www.ruby-forum.com/t/release-plan/136449/6 "2008-05-13T05:29:50Z")

</div>

Hi,

2008/5/12 Joachim G. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid):

> See attachment for test output at trunk revision 3191 on my machine.

Thanks.  
I’ve fixed your problem. It’s a problem of test.

I there still any problem?

–  
kou

---

<div class="post-metadata">

**Author:** ![Kouhei\_S](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/k/f4b2a3/32.png) [@Kouhei\_S](https://www.ruby-forum.com/u/Kouhei_S)\
**Post date:** [May 10, 2008, 4:31am UTC](https://www.ruby-forum.com/t/release-plan/136449/7 "2008-05-10T04:31:51Z")

</div>

Hi,

In [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)  
“Re: [ruby-gnome2-devel-en] Release plan” on Wed, 7 May 2008 17:08:36  
+0200,  
Joachim G. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) wrote:

> > > - gtk and glib automated test scripts fail for me. Please check this.
> > 
> > They aren’t failed on my environment. (GLib 2.16.3 and GTK+ 2.12.9)  
> > Could you show us their versions and test result on your  
> > environment.
> 
> libglib: 2.14.1-1ubuntu1  
> libgtk: 2.12.0-1ubuntu3

I can’t fix problems happened on your environment without  
your test result. Does anyone fail test on trunk?

## Thanks,

kou

---

<div class="post-metadata">

**Author:** ![Kouhei\_S](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/k/f4b2a3/32.png) [@Kouhei\_S](https://www.ruby-forum.com/u/Kouhei_S)\
**Post date:** [May 13, 2008, 11:49am UTC](https://www.ruby-forum.com/t/release-plan/136449/8 "2008-05-13T11:49:29Z")

</div>

Kouhei S. wrote:

> Thanks.  
> I’ve fixed your problem. It’s a problem of test.
> 
> I there still any problem?

See attached log file.

---

<div class="post-metadata">

**Author:** ![Kouhei\_S](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/k/f4b2a3/32.png) [@Kouhei\_S](https://www.ruby-forum.com/u/Kouhei_S)\
**Post date:** [May 14, 2008, 1:35pm UTC](https://www.ruby-forum.com/t/release-plan/136449/9 "2008-05-14T13:35:52Z")

</div>

Kouhei S. wrote:

> Hi,
> 
> 2008/5/13 Joachim G. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid):
> 
> > > I there still any problem?
> > 
> > See attached log file.
> 
> I’ve fixed. OK?  
> Rev 3205:

Every test except the gstreamer ones are fine. I don’t have the newest  
version of all libraries so I hope the omissions work for you. Since  
Gstreamer is still considered experimental, I will not wait until all  
tests work properly.

If there is nothing said against it, I’ll tag current trunk as 0.17.0  
and make a source code release. Windows binaries should be released  
later since it’s unknown how much time this will take.

@ Shin guey Wong, can you try to compile current trunk on windows  
platform?

---

<div class="post-metadata">

**Author:** ![Kouhei\_S](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/k/f4b2a3/32.png) [@Kouhei\_S](https://www.ruby-forum.com/u/Kouhei_S)\
**Post date:** [May 14, 2008, 4:09am UTC](https://www.ruby-forum.com/t/release-plan/136449/10 "2008-05-14T04:09:01Z")

</div>

Hi,

2008/5/13 Joachim G. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid):

> > I there still any problem?
> 
> See attached log file.

I’ve fixed. OK?

## Thanks,

kou

---

<div class="post-metadata">

**Author:** ![Kouhei\_S](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/k/f4b2a3/32.png) [@Kouhei\_S](https://www.ruby-forum.com/u/Kouhei_S)\
**Post date:** [May 14, 2008, 4:52pm UTC](https://www.ruby-forum.com/t/release-plan/136449/11 "2008-05-14T16:52:52Z")

</div>

> If there is nothing said against it, I’ll tag current trunk as 0.17.0  
> and make a source code release. Windows binaries should be released

Kouhei: are there sufficient gtk/glib changes since last time we  
talked about releasing 0.17.0 and we tested, so that we need to test  
again, just to make sure there was no regressions?

–  
Guillaume C. - [NVC Communication Obstacles Game](http://zarb.org/~gc/)

---

<div class="post-metadata">

**Author:** ![Kouhei\_S](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/k/f4b2a3/32.png) [@Kouhei\_S](https://www.ruby-forum.com/u/Kouhei_S)\
**Post date:** [May 15, 2008, 1:27am UTC](https://www.ruby-forum.com/t/release-plan/136449/12 "2008-05-15T01:27:17Z")

</div>

Hi,

2008/5/14 Guillaume C. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid):

> > If there is nothing said against it, I’ll tag current trunk as 0.17.0  
> > and make a source code release. Windows binaries should be released
> 
> Kouhei: are there sufficient gtk/glib changes since last time we  
> talked about releasing 0.17.0 and we tested, so that we need to test  
> again, just to make sure there was no regressions?

In my case, I added tests for my new works. So you will be able to  
confirm regressions by running tests. In others case, I don’t know  
how to confirm…

## Thanks,

kou

---

<div class="post-metadata">

**Author:** ![Kouhei\_S](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/k/f4b2a3/32.png) [@Kouhei\_S](https://www.ruby-forum.com/u/Kouhei_S)\
**Post date:** [May 14, 2008, 6:29pm UTC](https://www.ruby-forum.com/t/release-plan/136449/13 "2008-05-14T18:29:22Z")

</div>

Joachim G. wrote:

> Kouhei S. wrote:
> 
> @ Shin guey Wong, can you try to compile current trunk on windows  
> platform?

OK, I will take some time in tomorrow night to compile the latest trunk  
on windows again. I will not compile both liggonomeprint and  
gonomeprintui because it has some problem on windows.

---

<div class="post-metadata">

**Author:** ![Kouhei\_S](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/k/f4b2a3/32.png) [@Kouhei\_S](https://www.ruby-forum.com/u/Kouhei_S)\
**Post date:** [May 23, 2008, 2:16pm UTC](https://www.ruby-forum.com/t/release-plan/136449/14 "2008-05-23T14:16:35Z")

</div>

Shin guey Wong wrote:

> SUCCEEDED: glib gdkpixbuf pango atk gtk bonoboui gconf gnomevfs  
> gstreamer gtkglext gtksourceview lib  
> glade poppler rsvg
> 
> FAILED: bonobo gnome gnomecanvas gnomeprint gnomeprintui
> 
> ## Ignored libraries: gtkhtml2, gtkmozembed, libart, libgda, panel-applet, vte

libart was included on last windows release too.

> I doubt the gstreamer is usable.  
> Ok.

> The run-test.rb script is not running  
> under windows environment, first the Open3.popen is not usable in  
> windows.  
> I had change it to use the win32-open3 cmd but I have to change  
> the argument pass into it also. But still, most of the test is not  
> running because the command line ‘\> /dev/null’ is not recognize in  
> windows. So, it is hard for me to change all the test file windows  
> compatible.  
> Have you tried running the tests in a MinGW shell?

> I am not sure a windows binary release is needed or not because I  
> compile this gnome with mingw, it is conceptually compatible with VC6  
> ruby but I never tested it with OCI VC6 ruby. How many ppl using the  
> mingw ruby now?  
> I’ve no idea. Is current ruby binaries for windows compiled with VC6?

---

<div class="post-metadata">

**Author:** ![Kouhei\_S](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/k/f4b2a3/32.png) [@Kouhei\_S](https://www.ruby-forum.com/u/Kouhei_S)\
**Post date:** [May 23, 2008, 4:04pm UTC](https://www.ruby-forum.com/t/release-plan/136449/15 "2008-05-23T16:04:17Z")

</div>

Joachim G. wrote:

> Shin guey Wong wrote:
> 
> > SUCCEEDED: glib gdkpixbuf pango atk gtk bonoboui gconf gnomevfs  
> > gstreamer gtkglext gtksourceview lib  
> > glade poppler rsvg
> > 
> > FAILED: bonobo gnome gnomecanvas gnomeprint gnomeprintui
> > 
> > ## Ignored libraries: gtkhtml2, gtkmozembed, libart, libgda, panel-applet, vte
> 
> libart was included on last windows release too.

I checked it again, seems like it is missing libpng12. I download it and  
compile again.

checking for GCC… yes  
checking for rb\_define\_alloc\_func()… yes  
checking for rb\_block\_proc()… yes  
checking for new allocation framework… yes  
checking for attribute assignment… yes  
checking for libart-2.0… yes  
checking for libpng12… yes  
checking for jpeglib.h… yes  
checking for png\_create\_write\_struct() in -lpng… no  
checking for jpeg\_set\_defaults() in -ljpeg… yes  
checking for art\_affine\_identity() in -lart\_lgpl\_2… yes  
checking for G\_PLATFORM\_WIN32… no  
creating Makefile

it is weird that in libart, the platform is non win32, while all other  
package detected as win32.

Then, the libjpeg dll I downloaded from the gnuwin32 is not working. I  
downloaded the libjpeg source from [igj.org](http://igj.org) and recompile again. It  
manage to compile with mingw. When I compile it with libart, it has some  
type definition conflict with some mingw header. I had to comment all  
the conflict type in the mingw header file in order to make it compile.  
I tried to run the sample in the libart, it seems to be running fine.  
So, I assume the libart is working coz no other test for me to test it.

---

<div class="post-metadata">

**Author:** ![Kouhei\_S](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/k/f4b2a3/32.png) [@Kouhei\_S](https://www.ruby-forum.com/u/Kouhei_S)\
**Post date:** [May 23, 2008, 4:07pm UTC](https://www.ruby-forum.com/t/release-plan/136449/16 "2008-05-23T16:07:59Z")

</div>

> > I am not sure a windows binary release is needed or not because I  
> > compile this gnome with mingw, it is conceptually compatible with VC6  
> > ruby but I never tested it with OCI VC6 ruby. How many ppl using the  
> > mingw ruby now?  
> > I’ve no idea. Is current ruby binaries for windows compiled with VC6?

The latest official release of OCI for windows is still compiled with  
VC6. Luis L. has some unofficial release of mingw ruby. It still has  
some bug with the mingw version (I am running fine with it except the  
readline package is broken, it can run irb but the cpu consumption is  
high).

---

<div class="post-metadata">

**Author:** ![Kouhei\_S](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/k/f4b2a3/32.png) [@Kouhei\_S](https://www.ruby-forum.com/u/Kouhei_S)\
**Post date:** [May 23, 2008, 9:34am UTC](https://www.ruby-forum.com/t/release-plan/136449/17 "2008-05-23T09:34:38Z")

</div>

Shin guey Wong wrote:

> Joachim G. wrote:
> 
> > Kouhei S. wrote:
> > 
> > @ Shin guey Wong, can you try to compile current trunk on windows  
> > platform?
> 
> OK, I will take some time in tomorrow night to compile the latest trunk  
> on windows again. I will not compile both liggonomeprint and  
> gonomeprintui because it has some problem on windows.

Well, sorry for the late notice. I should said next week instead of the  
next day ☹

## First, here is the binary I was able to compile:

SUCCEEDED: glib gdkpixbuf pango atk gtk bonoboui gconf gnomevfs  
gstreamer gtkglext gtksourceview lib  
glade poppler rsvg

FAILED: bonobo gnome gnomecanvas gnomeprint gnomeprintui

## Ignored libraries: gtkhtml2, gtkmozembed, libart, libgda, panel-applet, vte

I doubt the gstreamer is usable. The run-test.rb script is not running  
under windows environment, first the Open3.popen is not usable in  
windows. I had change it to use the win32-open3 cmd but I have to change  
the argument pass into it also. But still, most of the test is not  
running because the command line ‘\> /dev/null’ is not recognize in  
windows. So, it is hard for me to change all the test file windows  
compatible.

So, I just simple run most of the sample program come with windows one  
click installer. All the program in glib, gtk, gdkpixbuf, gtkglext and  
gtksourceview is working. Gconf2 also working.

I am not sure a windows binary release is needed or not because I  
compile this gnome with mingw, it is conceptually compatible with VC6  
ruby but I never tested it with OCI VC6 ruby. How many ppl using the  
mingw ruby now?

I haven’t have time to look at the previous windows binary release yet.  
Still not sure how masao mutoh package all the windows binary release.

---

<div class="post-metadata">

**Author:** ![Kouhei\_S](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/k/f4b2a3/32.png) [@Kouhei\_S](https://www.ruby-forum.com/u/Kouhei_S)\
**Post date:** [May 24, 2008, 3:26am UTC](https://www.ruby-forum.com/t/release-plan/136449/18 "2008-05-24T03:26:33Z")

</div>

Hi,

In [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)  
“Re: [ruby-gnome2-devel-en] Release plan” on Fri, 23 May 2008 16:04:17  
+0200,  
Shin guey Wong [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) wrote:

> > > vte  
> > > checking for rb\_block\_proc()… yes
> 
> it is weird that in libart, the platform is non win32, while all other  
> package detected as win32.

Because mkmf-gnome2.rb uses glibconfig.h included in GLib  
package to detect G\_PLATFORM\_WIN32. libart doesn’t depend on  
GLib so your extconf.rb can’t detect G\_PLATFORM\_WIN32  
correctly.

What about the following patch?

# Index: extconf.rb

— extconf.rb (revision 3226)  
+++ extconf.rb (working copy)  
@@ -24,6 +24,13 @@

setup\_win32(PACKAGE\_NAME)

+if $cc\_is\_gcc and /mingw|mswin32/ =~ RUBY\_PLATFORM # should not include  
mswin32?

- if /^2./ =~ `#{Config::CONFIG['CC']} -dumpversion`.chomp
- $CFLAGS += ’ -fnative-struct’
- else
- $CFLAGS += ’ -mms-bitfields’
- end  
+end
- 

## create\_makefile\_at\_srcdir(PACKAGE\_NAME, SRCDIR, “-DRUBY\_LIBART2\_COMPILATION”) create\_top\_makefile

BTW, libart is a deprecated library. GTK+ uses cairo for  
rendering. I think Ruby/Libart2 isn’t a needed package. (like  
Ruby/GnomePrint, Ruby/GnomePrintUI, Ruby/GNOME2 and  
Ruby/GnomeCanvas.)

## Thanks,

kou

---

<div class="post-metadata">

**Author:** ![Kouhei\_S](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/k/f4b2a3/32.png) [@Kouhei\_S](https://www.ruby-forum.com/u/Kouhei_S)\
**Post date:** [May 23, 2008, 6:45pm UTC](https://www.ruby-forum.com/t/release-plan/136449/19 "2008-05-23T18:45:37Z")

</div>

Shin guey Wong wrote:

> > > I am not sure a windows binary release is needed or not because I  
> > > compile this gnome with mingw, it is conceptually compatible with VC6  
> > > ruby but I never tested it with OCI VC6 ruby. How many ppl using the  
> > > mingw ruby now?  
> > > I’ve no idea. Is current ruby binaries for windows compiled with VC6?
> 
> The latest official release of OCI for windows is still compiled with  
> VC6. Luis L. has some unofficial release of mingw ruby. It still has  
> some bug with the mingw version (I am running fine with it except the  
> readline package is broken, it can run irb but the cpu consumption is  
> high).

Ok, than I understand why my first attempt to do this on windows did not  
succeed. Do you have possibilities to compile with VC6?

> checking for G\_PLATFORM\_WIN32… no

Hm, in extconf.rb same check is used for this and other modules:  
setup\_win32(PACKAGE\_NAME)

---

<div class="post-metadata">

**Author:** ![Kouhei\_S](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/k/f4b2a3/32.png) [@Kouhei\_S](https://www.ruby-forum.com/u/Kouhei_S)\
**Post date:** [May 24, 2008, 8:54pm UTC](https://www.ruby-forum.com/t/release-plan/136449/20 "2008-05-24T20:54:48Z")

</div>

Kouhei S. wrote:

> BTW, libart is a deprecated library. GTK+ uses cairo for  
> rendering. I think Ruby/Libart2 isn’t a needed package. (like  
> Ruby/GnomePrint, Ruby/GnomePrintUI, Ruby/GNOME2 and  
> Ruby/GnomeCanvas.)

Hm, is GnomePrint(/UI) really supposed to work under win32 environments?

[Next page](https://www.ruby-forum.com/t/release-plan/136449.md?page=2)
