# Re: Warning! Warning! **URL:** \ **Category:** GNU Radio\ **Created:** [October 21, 2011, 3:41am UTC](https://www.ruby-forum.com/t/re-warning-warning/213025 "2011-10-21T03:41:09Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![dubstep](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/d/cdc98d/32.png) [@dubstep](https://www.ruby-forum.com/u/dubstep)\ **Post date:** [October 21, 2011, 3:41am UTC](https://www.ruby-forum.com/t/re-warning-warning/213025/1 "2011-10-21T03:41:09Z")
> All USRP daughterboards are supported in UHD. You should have no problems > with DBSRX and BasicRX. > > Tom I think this is not entirely true: I have a TVRX that is not recognised by the uhd driver… Achilleas ================================ Message: 6 Date: Thu, 20 Oct 2011 09:46:22 -0700 From: Tom R. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) To: Mark C. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) Cc: GNURadio D.ion List [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) Subject: Re: [Discuss-gnuradio] Warning! Warning! Message-ID: [CANc0s2M6sNH3SHdq9TsKXYojJTCaOWYDEE6bHnJ\_VYYrd=removed\_email\_address@domain.invalid](mailto:CANc0s2M6sNH3SHdq9TsKXYojJTCaOWYDEE6bHnJ_VYYrd=removed_email_address@domain.invalid) Content-Type: text/plain; charset=“windows-1252” On Thu, Oct 20, 2011 at 8:58 AM, Mark C. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) wrote: > What does this mean in terms of using older non-UHD-native daughterboards > such as the DBSRX & BasicRX? > To be honest, I haven’t checked into the UHD driver, since the > daughterboards I have been working fine without it? > > Best, > Mark All USRP daughterboards are supported in UHD. You should have no problems with DBSRX and BasicRX. Tom ---
**Author:** ![Achilleas\_A](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/a/74df32/32.png) [@Achilleas\_A](https://www.ruby-forum.com/u/Achilleas_A)\ **Post date:** [November 8, 2011, 12:39am UTC](https://www.ruby-forum.com/t/re-warning-warning/213025/2 "2011-11-08T00:39:00Z")
Hi, Achilleas is right about the UHD not supporting all Ettus products just yet. I also have an original TVRX rev1 from the USRP1 Serial \< 500 days (all still running fantastically btw) and it doesn’t work with the UHD. As you are now migrating everything to the UHD and discontinuing the old code, would it be possible to request that you add TVRX Rev1 UHD support to your things to do list? Thanks, Mike On Oct 21, 2011 2:40 AM, “Achilleas A.” [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) ---
**Author:** ![Achilleas\_A](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/a/74df32/32.png) [@Achilleas\_A](https://www.ruby-forum.com/u/Achilleas_A)\ **Post date:** [November 8, 2011, 12:48am UTC](https://www.ruby-forum.com/t/re-warning-warning/213025/3 "2011-11-08T00:48:52Z")
On Mon, Nov 7, 2011 at 3:38 PM, Mike J. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) wrote: > Hi, > > Achilleas is right about the UHD not supporting all Ettus products just yet. > I also have an original TVRX rev1 from the USRP1 Serial \< 500 days (all > still running fantastically btw) and it doesn’t work with the UHD. As you > are now migrating everything to the UHD and discontinuing the old code, > would it be possible to request that you add TVRX Rev1 UHD support to your > things to do list? OK, I guess I was wrong before about nobody still using those daughterboards. I’ll put “ancient TVRX support” on the todo list for UHD. –n ---
**Author:** ![Achilleas\_A](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/a/74df32/32.png) [@Achilleas\_A](https://www.ruby-forum.com/u/Achilleas_A)\ **Post date:** [November 8, 2011, 1:00am UTC](https://www.ruby-forum.com/t/re-warning-warning/213025/4 "2011-11-08T01:00:40Z")
Add 4 more dinosaurs to the list who use those and trad GR 😉 Patrik ----- Original Message ----- From: “Nick F.” [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) To: [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) Cc: “Matt E.” [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid); [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid); [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) Sent: Tuesday, November 08, 2011 1:48 Subject: Re: [Discuss-gnuradio] Warning! Warning! On Mon, Nov 7, 2011 at 3:38 PM, Mike J. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) wrote: > Hi, > > Achilleas is right about the UHD not supporting all Ettus products just > yet. > I also have an original TVRX rev1 from the USRP1 Serial \< 500 days (all > still running fantastically btw) and it doesn’t work with the UHD. As you > are now migrating everything to the UHD and discontinuing the old code, > would it be possible to request that you add TVRX Rev1 UHD support to your > things to do list? OK, I guess I was wrong before about nobody still using those daughterboards. I’ll put “ancient TVRX support” on the todo list for UHD. –n > > > with DBSRX and BasicRX. > > > > Content-Type: text/plain; charset=“windows-1252” > > > > > Mark > > > [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) > > > [Discuss-gnuradio Info Page](https://lists.gnu.org/mailman/listinfo/discuss-gnuradio) > > * * * > > Discuss-gnuradio mailing list > [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) > [Discuss-gnuradio Info Page](https://lists.gnu.org/mailman/listinfo/discuss-gnuradio) * * * Discuss-gnuradio mailing list [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) > **[Discuss-gnuradio Info Page](https://lists.gnu.org/mailman/listinfo/discuss-gnuradio)** ---
**Author:** ![Achilleas\_A](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/a/74df32/32.png) [@Achilleas\_A](https://www.ruby-forum.com/u/Achilleas_A)\ **Post date:** [February 19, 2012, 8:44pm UTC](https://www.ruby-forum.com/t/re-warning-warning/213025/5 "2012-02-19T20:44:18Z")
Hi, I have just run the attached script on an Ubuntu 10.04.4\_x64 LTS system to seamlessly install the latest UHD and Gnu Radio builds. As you can see from the output of ‘uhd\_usrp\_probe’ below, the TVRX rev1 in RX Dboard B is still not UHD compatible. Would it be possible to indicate an ETA for when the UHD will be compatible with the very first 50 to 800Mhz receiver in the Ettus R. product range? Thanks, Mike M0MIK gnuradio@gnuradio:~$ uhd\_find\_devices linux; GNU C++ version 4.4.3; Boost\_104000; UHD\_003.004.000-3ddbcb6 * * * ## – UHD Device 0 Device Address: type: usrp1 name: serial: 00000000 gnuradio@gnuradio:~$ uhd\_usrp\_probe linux; GNU C++ version 4.4.3; Boost\_104000; UHD\_003.004.000-3ddbcb6 – Opening a USRP1 device… – Loading FPGA image: /usr/local/share/uhd/images/usrp1\_fpga.rbf… done – Using FPGA clock rate of 64.000000MHz… * * * / | Device: USRP1 Device | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ | / | | Mboard: USRP1 (Classic) | | | | Time sources: none | | Clock sources: internal | | Sensors: | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ | | / | | | RX DSP: 0 | | | Freq range: -32.000 to 32.000 Mhz | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ | | / | | | RX DSP: 1 | | | Freq range: -32.000 to 32.000 Mhz | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ | | / | | | RX Dboard: A | | | ID: DBSRX (0x0002) | | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ | | | / | | | | RX Subdev: 0 | | | | Name: DBSRX (0x0002) | | | | Antennas: J3 | | | | Sensors: lo\_locked | | | | Freq range: 800.000 to 2400.000 Mhz | | | | Gain range GC1: 0.0 to 56.0 step 0.5 dB | | | | Gain range GC2: 0.0 to 24.0 step 1.0 dB | | | | Connection Type: IQ | | | | Uses LO offset: No | | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ | | | / | | | | RX Codec: A | | | | Name: ad9522 | | | | Gain range pga: 0.0 to 20.0 step 1.0 dB | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ | | / | | | RX Dboard: B | | | ID: Unknown (0x0003) | | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ | | | / | | | | RX Subdev: 0 | | | | Name: Unknown (0x0003) - 0 | | | | Antennas: | | | | Sensors: | | | | Freq range: 0.000 to 0.000 Mhz | | | | Gain Elements: None | | | | Connection Type: IQ | | | | Uses LO offset: No | | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ | | | / | | | | RX Codec: B | | | | Name: ad9522 | | | | Gain range pga: 0.0 to 20.0 step 1.0 dB | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ | | / | | | TX DSP: 0 | | | Freq range: -44.000 to 44.000 Mhz | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ | | / | | | TX DSP: 1 | | | Freq range: -44.000 to 44.000 Mhz | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ | | / | | | TX Dboard: A | | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ | | | / | | | | TX Subdev: 0 | | | | Name: Unknown (0xffff) - 0 | | | | Antennas: | | | | Sensors: | | | | Freq range: 0.000 to 0.000 Mhz | | | | Gain Elements: None | | | | Connection Type: IQ | | | | Uses LO offset: No | | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ | | | / | | | | TX Codec: A | | | | Name: ad9522 | | | | Gain range pga: -20.0 to 0.0 step 0.1 dB | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ | | / | | | TX Dboard: B | | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ | | | / | | | | TX Subdev: 0 | | | | Name: Unknown (0xffff) - 0 | | | | Antennas: | | | | Sensors: | | | | Freq range: 0.000 to 0.000 Mhz | | | | Gain Elements: None | | | | Connection Type: IQ | | | | Uses LO offset: No | | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ | | | / | | | | TX Codec: B | | | | Name: ad9522 | | | | Gain range pga: -20.0 to 0.0 step 0.1 dB