# Re: RubyGems 1.3.6, Bundler, etc **URL:** \ **Category:** IronRuby\ **Created:** [April 26, 2010, 10:54pm UTC](https://www.ruby-forum.com/t/re-rubygems-1-3-6-bundler-etc/187616 "2010-04-26T22:54:33Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![raker\_t](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/r/ecae2f/32.png) [@raker\_t](https://www.ruby-forum.com/u/raker_t)\ **Post date:** [April 26, 2010, 10:54pm UTC](https://www.ruby-forum.com/t/re-rubygems-1-3-6-bundler-etc/187616/1 "2010-04-26T22:54:33Z")
Can we take this as a patch? Have you signed an agreement? * * * From: Kevin R. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) Sent: Monday, April 26, 2010 12:26 PM To: removed\_email\_address@domain.invalid [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) Subject: Re: [Ironruby-core] RubyGems 1.3.6, Bundler, etc. My own ironruby.rb: [rubygems\defaults\ironruby.rb · GitHub](http://gist.github.com/379763) [http://gist.github.com/379763](http://gist.github.com/379763)Thanks - Kevin On Mon, Apr 26, 2010 at 1:23 PM, Kevin R. \ wrote: Confirming, that it seems to work properly for me: C:\IronRuby1.0\_V4\>ir IronRuby 1.0.0.0 on .NET 4.0.30319.1 Copyright (c) Microsoft Corporation. All rights reserved. > > > require ‘rubygems’ > > > =\> true > > > RbConfig::CONFIG[‘rubylibdir’] > > > =\> “C:/IronRuby1.0\_V4/lib/ruby/1.8” # ← Sounds like it should go here. I then created an ironruby.rb in: C:\IronRuby1.0\_V4\Lib\ruby\1.8\rubygems\defaults my ironruby.rb just commented out the “unless” block. after that, “igem update --system” just worked., as did the install of the bundler gem. Was there a version of ironruby.rb attached somewhere earlier with all of the appropriate overrides? - I just guessed. Thanks Best Regards, Kevin R. On Mon, Apr 26, 2010 at 11:41 AM, Jim D. \ wrote: This is the comment we got from Eric (RubyGems maintainer). JD > Comment By: Eric H. (drbrain) > Date: 2010-04-20 20:47 Message: rubygems/defaults/ironruby.rb would go in RbConfig::CONFIG[‘rubylibdir’] (not in RuybGems) so it should be picked up even by setup.rb From: removed\_email\_address@domain.invalid[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) [[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)] On Behalf Of Ryan R. Sent: Saturday, April 24, 2010 11:33 AM To: removed\_email\_address@domain.invalid[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) Subject: Re: [Ironruby-core] RubyGems 1.3.6, Bundler, etc. Where exactly does the #{RUBY\_ENGINE}.rb file go? I am having a hard time finding the location. I changed the impl. of default\_exec\_format and was able to update RubyGems. However, I think adding the ruby engine file is a better way to go. Ryan R. On Thu, Apr 22, 2010 at 11:39 PM, Tomas M. \ wrote: This is a bug in RubyGems. It seems that we can get around it by providing lib/rubygems/ironruby.rb file: [http://rubyforge.org/tracker/index.php?func=detail&aid=27995&group\_id=126&atid=575](http://rubyforge.org/tracker/index.php?func=detail&aid=27995&group_id=126&atid=575) Tomas From: removed\_email\_address@domain.invalid[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) [[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)] On Behalf Of Ryan R. Sent: Thursday, April 22, 2010 10:07 PM To: removed\_email\_address@domain.invalid[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) Subject: [Ironruby-core] RubyGems 1.3.6, Bundler, etc. While trying to install DataMapper from source, I ran into a few additional issues. I can create cases if they are legit, but I suspect I’m just missing something. When I tried to install dm-more, I received an error stating I didn’t have bundler installed. When I tried installing bundler, I couldn’t because it requires RubyGems 1.3.6. When I tried executing `ir -S gem update --system`, I received the following: C:\Users\ryan\>ir -S gem update --system Updating RubyGems Updating rubygems-update Successfully installed rubygems-update-1.3.6 Updating RubyGems to 1.3.6 Installing RubyGems 1.3.6 ERROR: While executing gem … (Gem::Exception) [BUG] invalid exec\_format “ir”, no %s Is IronRuby telling me it has a known bug, or is this something else? Can I upgrade to RubyGems 1.3.6? Can I install Bundler? Thanks, Ryan R. Email: removed\_email\_address@domain.invalid[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) LinkedIn: [http://www.linkedin.com/in/ryanriley](http://www.linkedin.com/in/ryanriley) Blog: [http://wizardsofsmart.net/](http://wizardsofsmart.net/) Twitter: @panesofglass Website: [http://panesofglass.org/](http://panesofglass.org/) * * * Ironruby-core mailing list removed\_email\_address@domain.invalid[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) [http://rubyforge.org/mailman/listinfo/ironruby-core](http://rubyforge.org/mailman/listinfo/ironruby-core) ---
**Author:** ![raker\_t](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/r/ecae2f/32.png) [@raker\_t](https://www.ruby-forum.com/u/raker_t)\ **Post date:** [April 26, 2010, 11:10pm UTC](https://www.ruby-forum.com/t/re-rubygems-1-3-6-bundler-etc/187616/2 "2010-04-26T23:10:22Z")
Why not just return “i%s” ? Tomas From: [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) [[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)] On Behalf Of Jim D. Sent: Monday, April 26, 2010 1:54 PM To: [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) Subject: Re: [Ironruby-core] RubyGems 1.3.6, Bundler, etc. Can we take this as a patch? Have you signed an agreement? * * * From: Kevin R. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) Sent: Monday, April 26, 2010 12:26 PM To: [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) Subject: Re: [Ironruby-core] RubyGems 1.3.6, Bundler, etc. My own ironruby.rb: [rubygems\defaults\ironruby.rb · GitHub](http://gist.github.com/379763) Thanks - Kevin On Mon, Apr 26, 2010 at 1:23 PM, Kevin R. \<[removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)\> wrote: Confirming, that it seems to work properly for me: C:\IronRuby1.0\_V4\>ir IronRuby 1.0.0.0 on .NET 4.0.30319.1 Copyright (c) Microsoft Corporation. All rights reserved. > > > require ‘rubygems’ > > > =\> true > > > RbConfig::CONFIG[‘rubylibdir’] > > > =\> “C:/IronRuby1.0\_V4/lib/ruby/1.8” # ← Sounds like it should go here. I then created an ironruby.rb in: C:\IronRuby1.0\_V4\Lib\ruby\1.8\rubygems\defaults my ironruby.rb just commented out the “unless” block. after that, “igem update --system” just worked., as did the install of the bundler gem. Was there a version of ironruby.rb attached somewhere earlier with all of the appropriate overrides? - I just guessed. Thanks Best Regards, Kevin R. On Mon, Apr 26, 2010 at 11:41 AM, Jim D. \<[removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)\> wrote: This is the comment we got from Eric (RubyGems maintainer). JD > Comment By: Eric H. (drbrain) > Date: 2010-04-20 20:47 Message: rubygems/defaults/ironruby.rb would go in RbConfig::CONFIG[‘rubylibdir’] (not in RuybGems) so it should be picked up even by setup.rb From: [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) [[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)] On Behalf Of Ryan R. Sent: Saturday, April 24, 2010 11:33 AM To: [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) Subject: Re: [Ironruby-core] RubyGems 1.3.6, Bundler, etc. Where exactly does the #{RUBY\_ENGINE}.rb file go? I am having a hard time finding the location. I changed the impl. of default\_exec\_format and was able to update RubyGems. However, I think adding the ruby engine file is a better way to go. Ryan R. On Thu, Apr 22, 2010 at 11:39 PM, Tomas M. \<[removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)\> wrote: This is a bug in RubyGems. It seems that we can get around it by providing lib/rubygems/ironruby.rb file: [http://rubyforge.org/tracker/index.php?func=detail&aid=27995&group\_id=126&atid=575](http://rubyforge.org/tracker/index.php?func=detail&aid=27995&group_id=126&atid=575) Tomas From: [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) [[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)] On Behalf Of Ryan R. Sent: Thursday, April 22, 2010 10:07 PM To: [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) Subject: [Ironruby-core] RubyGems 1.3.6, Bundler, etc. While trying to install DataMapper from source, I ran into a few additional issues. I can create cases if they are legit, but I suspect I’m just missing something. When I tried to install dm-more, I received an error stating I didn’t have bundler installed. When I tried installing bundler, I couldn’t because it requires RubyGems 1.3.6. When I tried executing `ir -S gem update --system`, I received the following: C:\Users\ryan\>ir -S gem update --system Updating RubyGems Updating rubygems-update Successfully installed rubygems-update-1.3.6 Updating RubyGems to 1.3.6 Installing RubyGems 1.3.6 ERROR: While executing gem … (Gem::Exception) [BUG] invalid exec\_format “ir”, no %s Is IronRuby telling me it has a known bug, or is this something else? Can I upgrade to RubyGems 1.3.6? Can I install Bundler? Thanks, Ryan R. Email: [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) LinkedIn: [http://www.linkedin.com/in/ryanriley](http://www.linkedin.com/in/ryanriley) Blog: [http://wizardsofsmart.net/](http://wizardsofsmart.net/) Twitter: @panesofglass Website: [http://panesofglass.org/](http://panesofglass.org/) * * * Ironruby-core mailing list [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) [http://rubyforge.org/mailman/listinfo/ironruby-core](http://rubyforge.org/mailman/listinfo/ironruby-core) ---
**Author:** ![raker\_t](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/r/ecae2f/32.png) [@raker\_t](https://www.ruby-forum.com/u/raker_t)\ **Post date:** [April 27, 2010, 12:19am UTC](https://www.ruby-forum.com/t/re-rubygems-1-3-6-bundler-etc/187616/3 "2010-04-27T00:19:27Z")
You could, and yes I did sign an agreement, but Tomas’ suggestion probably works better. I just threw it out there to show that it would work. Thanks! Best Regards, Kevin R.