# Re: Multiple clinets on a TCPServer

**URL:** <https://www.ruby-forum.com/t/re-multiple-clinets-on-a-tcpserver/70963>\
**Category:** Ruby\
**Created:** [October 4, 2006, 11:22am UTC](https://www.ruby-forum.com/t/re-multiple-clinets-on-a-tcpserver/70963 "2006-10-04T11:22:02Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![piet](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/p/a9adbd/32.png) [@piet](https://www.ruby-forum.com/u/piet)\
**Post date:** [October 4, 2006, 11:22am UTC](https://www.ruby-forum.com/t/re-multiple-clinets-on-a-tcpserver/70963/1 "2006-10-04T11:22:02Z")

</div>

Also check:

[Sockets](http://pleac.sourceforge.net/pleac_ruby/sockets.html) (pre-forking  
server)

[http://www-128.ibm.com/developerworks/edu/l-dw-linux-rubysocks-i.html](http://www-128.ibm.com/developerworks/edu/l-dw-linux-rubysocks-i.html)  
I used this as introduction to ruby socket stuff when writing a VIP to  
ansi/vt100 gateway. (VIP is an ancient 70’s or so form-based terminal  
protocol from Bull)

Piet.