# Re: gr-cdma is ready **URL:** \ **Category:** GNU Radio\ **Created:** [March 12, 2014, 5:32pm UTC](https://www.ruby-forum.com/t/re-gr-cdma-is-ready/239733 "2014-03-12T17:32:02Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![Detlef\_R](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/d/58f4c7/32.png) [@Detlef\_R](https://www.ruby-forum.com/u/Detlef_R)\ **Post date:** [March 12, 2014, 5:32pm UTC](https://www.ruby-forum.com/t/re-gr-cdma-is-ready/239733/1 "2014-03-12T17:32:02Z")
---------- Forwarded message ---------- From: Zhe F. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) Date: Sun, Mar 9, 2014 at 2:42 PM Subject: Re: [Discuss-gnuradio] gr-cdma is ready To: Karan T. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) Cc: Achilleas A. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) Hi Karan, If you installed this gr-cdma module with DENABLE\_DOXYGEN=ON, you can find the html documentation in usr/local/share/doc/gr-cdma/html/index.html This html gives a general description of the module and contains the documentation of all the c++ blocks used (flag\_gen, chopper, vector\_insert2), and all hier blocks. For the python blocks (kronecker\_filter, freq\_timing\_estimator), you open your python and do: _import cdma,_ _help(cdma) #for a general look of cdma_ \*help(cdma.kronecker\_filter) #for checking the documentation of the block kronecker\_filter. \* Please feel free to reply if you have any additional questions or suggestions. Best, Zhe On Sat, Mar 8, 2014 at 6:50 AM, Karan T. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) wrote: > removed\_email\_address@domain.invalid\> wrote: > > > this project grew out of the DARPA SPECTRUM CHALLENGE: > > > > – If you have 2 USRPs load the cdma\_tx.grc and cdma\_rx.grc and enjoy > > > > * * * – Zhe F. Electrical Engineering: System University of Michigan Ann Arbor Tel: 734-834-3188