# Re: file source with gr-ieee802.11 tx **URL:** \ **Category:** GNU Radio\ **Created:** [August 6, 2015, 1:36pm UTC](https://www.ruby-forum.com/t/re-file-source-with-gr-ieee802-11-tx/242907 "2015-08-06T13:36:23Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Rafa\_F](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/r/958977/32.png) [@Rafa\_F](https://www.ruby-forum.com/u/Rafa_F)\ **Post date:** [August 6, 2015, 1:36pm UTC](https://www.ruby-forum.com/t/re-file-source-with-gr-ieee802-11-tx/242907/1 "2015-08-06T13:36:23Z")
> There is currently no option to dump raw bytes, but its a trivial modification > of the Wireshark block (dump without a PCAP header). > If you want to printed bytes as hex-values on the console that should work with > the parse block. Bastian, I modified the Wireshark Connector block to have a “payload only” boolean feature that when enabled only passes the payload through (when disabled, the block acts like it does now). So far I have only used it for WiFi, but the ZigBee fix should be pretty trivial as well. Is this something that you would like to see in your mainline, or should I just keep it internal? ---
**Author:** ![Jason\_Matusiak](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/edb3f5/32.png) [@Jason\_Matusiak](https://www.ruby-forum.com/u/Jason_Matusiak)\ **Post date:** [August 8, 2015, 10:22am UTC](https://www.ruby-forum.com/t/re-file-source-with-gr-ieee802-11-tx/242907/2 "2015-08-08T10:22:31Z")
Hi, > used it for WiFi, but the ZigBee fix should be pretty trivial as well. > Is this something that you would like to see in your mainline, or should > I just keep it internal? That sounds great. Maybe it shouldn’t be an option of the Wireshark block (since it might be confusing if it outputs data that cannot be read by Wireshark), but a small block on it’s own? I don’t know… Looking forward to your pull request. Best, Bastian