# Re: Deploy Radiant via Modproxy

**URL:** <https://www.ruby-forum.com/t/re-deploy-radiant-via-modproxy/71404>\
**Category:** Radiant CMS\
**Created:** [October 8, 2006, 6:29am UTC](https://www.ruby-forum.com/t/re-deploy-radiant-via-modproxy/71404 "2006-10-08T06:29:32Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![StJohn\_MackayS\_Asia](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/a9a28c/32.png) [@StJohn\_MackayS\_Asia](https://www.ruby-forum.com/u/StJohn_MackayS_Asia)\
**Post date:** [October 8, 2006, 6:29am UTC](https://www.ruby-forum.com/t/re-deploy-radiant-via-modproxy/71404/1 "2006-10-08T06:29:32Z")

</div>

Hi,

I’ve signed up on Textdrive to run Radiant - I have one site up and  
running and need to add a second site.

How/where do I change the mod\_proxy files on Textdrive to get the  
second site going?

Thanks,

StJohn

---

<div class="post-metadata">

**Author:** ![StJohn\_MackayS\_Asia](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/a9a28c/32.png) [@StJohn\_MackayS\_Asia](https://www.ruby-forum.com/u/StJohn_MackayS_Asia)\
**Post date:** [October 8, 2006, 4:38pm UTC](https://www.ruby-forum.com/t/re-deploy-radiant-via-modproxy/71404/2 "2006-10-08T16:38:28Z")

</div>

That’s something the TextDrive admins can help with better. I know you  
can do it with webmin, [https://webmin.yourserver.textdrive.com](https://webmin.yourserver.textdrive.com), but they  
know the specifics. They’re pretty responsive to support tickets, too,  
if you have special needs or questions.

Sean C.  
[seancribbs.com](http://seancribbs.com)

---

<div class="post-metadata">

**Author:** ![StJohn\_MackayS\_Asia](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/a9a28c/32.png) [@StJohn\_MackayS\_Asia](https://www.ruby-forum.com/u/StJohn_MackayS_Asia)\
**Post date:** [October 30, 2006, 9:36am UTC](https://www.ruby-forum.com/t/re-deploy-radiant-via-modproxy/71404/3 "2006-10-30T09:36:11Z")

</div>

Sean C. wrote:

> That’s something the TextDrive admins can help with better. I know you  
> can do it with webmin, [https://webmin.yourserver.textdrive.com](https://webmin.yourserver.textdrive.com), but they  
> know the specifics. They’re pretty responsive to support tickets, too,  
> if you have special needs or questions.
> 
> Sean C.  
> [seancribbs.com](http://seancribbs.com)

Hi,

Textdrive suggested this:

> I’m not sure if the concept applies when working with Lighttpd, you may need to check with someone \>in the Radiant community to know for sure. After setting up the primary app on Lighttpd (https://\>[help.textdrive.com/index.php?pg=kb.chapter&id=71](http://help.textdrive.com/index.php?pg=kb.chapter&id=71)), you can enter the proxy for the additional sites \>following the same instructions in the final section of that guide ([https://help.textdrive.com/](https://help.textdrive.com/)\>index.php?pg=kb.page&id=255), but entering the information you’ve been instructed to.

I’ve been working through this but can’t get it to work… can anyone  
point me in the right direction?

Thanks,

StJohn

---

<div class="post-metadata">

**Author:** ![StJohn\_MackayS\_Asia](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/a9a28c/32.png) [@StJohn\_MackayS\_Asia](https://www.ruby-forum.com/u/StJohn_MackayS_Asia)\
**Post date:** [November 7, 2006, 10:44am UTC](https://www.ruby-forum.com/t/re-deploy-radiant-via-modproxy/71404/4 "2006-11-07T10:44:51Z")

</div>

StJohn Mackay wrote:

Drop me a line if you need help with the TextDrive setup. I’m using  
lighttpd reversed proxying on pendrell with radiant. I’m in the process  
of migrating a couple of sites over to radiant.

Regards  
–jm