# One more page launched on Radiant CMS! :) **URL:** \ **Category:** Radiant CMS\ **Created:** [December 3, 2007, 11:50pm UTC](https://www.ruby-forum.com/t/one-more-page-launched-on-radiant-cms/122028 "2007-12-03T23:50:59Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![TSSSSnu\_Runnel](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/t/c0e974/32.png) [@TSSSSnu\_Runnel](https://www.ruby-forum.com/u/TSSSSnu_Runnel)\ **Post date:** [December 3, 2007, 11:50pm UTC](https://www.ruby-forum.com/t/one-more-page-launched-on-radiant-cms/122028/1 "2007-12-03T23:50:59Z")
Hi folks! I just launched a site running on Radiant after a week of building – www.kazbegi.info 🙂 Radiant is a very nice tool, keep it up! (I managed to build everything while being a designer not a programmer. So it really works, even without proper guidance. The only thing that is over my head is that on Mediatemple Radiant dies out after every 3-4 hours – it says something about “proxy error” and then, after restrart it says “bad gateway” during short time. I created a mtr restart radiant Crontab entity (stupid). Hope it works, otherwise I’m doomed. Shitty solution, so if anyone knows where the dog might be buried, tell me and I contact my programmer colleagues. They didn’t know this time. The memory consumption is half of the container, so it can’t be there I guess.) Regards Tõnu – FRAKTAL skype: runnel www.fraktal.ee ---
**Author:** ![TSSSSnu\_Runnel](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/t/c0e974/32.png) [@TSSSSnu\_Runnel](https://www.ruby-forum.com/u/TSSSSnu_Runnel)\ **Post date:** [December 4, 2007, 2:04am UTC](https://www.ruby-forum.com/t/one-more-page-launched-on-radiant-cms/122028/2 "2007-12-04T02:04:18Z")
> (I managed to build everything while being a designer not a > programmer. So > it really works, even without proper guidance. The only thing > that is over > my head is that on Mediatemple Radiant dies out after every > 3-4 hours – it Most likely cause is that you’ve got more processes running than your shared hosting can handle. Are you using mongrel or fastcgi? How many instances in your cluster? Try reducing the number of mongrel instances / fastcgi processes. ---
**Author:** ![TSSSSnu\_Runnel](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/t/c0e974/32.png) [@TSSSSnu\_Runnel](https://www.ruby-forum.com/u/TSSSSnu_Runnel)\ **Post date:** [December 4, 2007, 2:09am UTC](https://www.ruby-forum.com/t/one-more-page-launched-on-radiant-cms/122028/3 "2007-12-04T02:09:34Z")
Hi Tõnu, Tõnu Runnel wrote: > Hi folks! > > I just launched a site running on Radiant after a week of building – > www.kazbegi.info 🙂 Radiant is a very nice tool, keep it up! Really nice site. Clean, simple and informative. Kazbegi looks sweet. Too bad it is so far from Australia 🙂 > (I managed to build everything while being a designer not a programmer. So > it really works, even without proper guidance. Did you enter the content yourself in Textile? I would like my users to enter content with Textile but I think they will be very reluctant. The most technical they have ever got is creating a table in Word. Cheers, Mark ---
**Author:** ![TSSSSnu\_Runnel](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/t/c0e974/32.png) [@TSSSSnu\_Runnel](https://www.ruby-forum.com/u/TSSSSnu_Runnel)\ **Post date:** [December 4, 2007, 8:46am UTC](https://www.ruby-forum.com/t/one-more-page-launched-on-radiant-cms/122028/4 "2007-12-04T08:46:00Z")
I tried to leave all html code in the layout and snippets. So I gave the girls the pages tab where they entered all the content themselves (I only made some small examples). They had to use only textile + some few snippets and it was surprisingly easy and understandable for them – without any knowledge of anything beyond office, browsers etc. So I guess in most cases there is no need for wysiwyg. And – Word tables are more complex than | this | is | | a | table | 🙂 Tõnu 2007/12/4, Mark G. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid): ---
**Author:** ![TSSSSnu\_Runnel](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/t/c0e974/32.png) [@TSSSSnu\_Runnel](https://www.ruby-forum.com/u/TSSSSnu_Runnel)\ **Post date:** [December 4, 2007, 4:19pm UTC](https://www.ruby-forum.com/t/one-more-page-launched-on-radiant-cms/122028/5 "2007-12-04T16:19:31Z")
> Are you using mongrel or fastcgi? How many instances in your > cluster? Try reducing the number of mongrel instances /fastcgi > processes. Most of my Radiant sites only require one Mongrel process. Typically, with a shared host you won’t have enough memory available to run more than one. ---
**Author:** ![TSSSSnu\_Runnel](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/t/c0e974/32.png) [@TSSSSnu\_Runnel](https://www.ruby-forum.com/u/TSSSSnu_Runnel)\ **Post date:** [December 4, 2007, 5:21pm UTC](https://www.ruby-forum.com/t/one-more-page-launched-on-radiant-cms/122028/6 "2007-12-04T17:21:48Z")
Nice and simple design, congrats! ``` You said that your non-tech customers edit the pages themselves. How ``` are you managing the images? With an extension? ``` /AITOR ``` ---
**Author:** ![TSSSSnu\_Runnel](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/t/c0e974/32.png) [@TSSSSnu\_Runnel](https://www.ruby-forum.com/u/TSSSSnu_Runnel)\ **Post date:** [December 4, 2007, 5:41pm UTC](https://www.ruby-forum.com/t/one-more-page-launched-on-radiant-cms/122028/7 "2007-12-04T17:41:13Z")
On Dec 4, 2007, at 2:44 AM, Tõnu Runnel wrote: > there is no need for wysiwyg. And – Word tables are more complex than > > | this | is | > | a | table | So true! With a little training most people can grok basic HTML or Textile. So if you have time to invest in your people you will be much better off than resorting a clunky wysiwyg. – John L. [http://wiseheartdesign.com](http://wiseheartdesign.com) ---
**Author:** ![TSSSSnu\_Runnel](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/t/c0e974/32.png) [@TSSSSnu\_Runnel](https://www.ruby-forum.com/u/TSSSSnu_Runnel)\ **Post date:** [December 5, 2007, 8:06am UTC](https://www.ruby-forum.com/t/one-more-page-launched-on-radiant-cms/122028/8 "2007-12-05T08:06:34Z")
Nope ☹ I used Photoshop droplet to get the right size and uploaded files myself. Then they put the pictures onto pages following my example. At least the lightbox ajax gallery is very easy to use as you know. T. ``` You said that your non-tech customers edit the pages themselves. How ``` are ---
**Author:** ![TSSSSnu\_Runnel](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/t/c0e974/32.png) [@TSSSSnu\_Runnel](https://www.ruby-forum.com/u/TSSSSnu_Runnel)\ **Post date:** [December 5, 2007, 6:10am UTC](https://www.ruby-forum.com/t/one-more-page-launched-on-radiant-cms/122028/9 "2007-12-05T06:10:15Z")
- John W. Long [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) [2007-12-04 11:40:10 -0500]: > > any > > knowledge of anything beyond office, browsers etc. So I guess in > > most cases > > there is no need for wysiwyg. And – Word tables are more complex than > > > > | this | is | > > | a | table | > > So true! With a little training most people can grok basic HTML or > Textile. So if you have time to invest in your people you will be much > better off than resorting a clunky wysiwyg. Mostly true, except for tables like | This is a very very long long table xxxxxxxx yyyyyyyyyyyyyyyy zzzzzzzzzz kkkkkkkkkkkkkkkkkkkkkkkk mmmmmmmmmmmmmmmmmmm | kkkkkkkkkk kkkkkkkkkk tttt another long cell | Otherwise, most things are quite easy and intuitive to do with wiki markup. saji … – APEC Climate Center +82 51 668 7470 National Pension Corporation Busan Building 12F Yeonsan 2-dong, Yeonje-gu, BUSAN 611705 removed\_email\_address@domain.invalid KOREA