# Olpc

**URL:** <https://www.ruby-forum.com/t/olpc/123889>\
**Category:** GNU Radio\
**Created:** [December 21, 2007, 7:12pm UTC](https://www.ruby-forum.com/t/olpc/123889 "2007-12-21T19:12:25Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![Robert\_McGwier](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/r/c68b51/32.png) [@Robert\_McGwier](https://www.ruby-forum.com/u/Robert_McGwier)\
**Post date:** [December 21, 2007, 7:12pm UTC](https://www.ruby-forum.com/t/olpc/123889/1 "2007-12-21T19:12:25Z")

</div>

This is sent with my OLPC. What a great idea this project is. It  
goes to show what can be acccomplished ny dedicated individuals,  
something familiar to a lot of people in these two groups.

The thing does appear to have sufficient horsepower to do some DSP.  
I would like to think we can make several things available to this  
project. For example, I think a tunable HF receiver for shortwave AM  
broadcast is easiy achievable for very modest cost. Further out, I  
would to see the use of this machine and OFDM skywave to provide WAN  
capability to large areas of the world without such capability.

At least one Negroponte clearly has heart and vision.

Happy holidays and I hope everyone is looking forward to 2008 with as  
much anticipation as I am.

Bob

---

<div class="post-metadata">

**Author:** ![Robert\_McGwier](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/r/c68b51/32.png) [@Robert\_McGwier](https://www.ruby-forum.com/u/Robert_McGwier)\
**Post date:** [December 21, 2007, 9:00pm UTC](https://www.ruby-forum.com/t/olpc/123889/2 "2007-12-21T21:00:35Z")

</div>

Robert McGwier wrote:

> At least one Negroponte clearly has heart and vision.
> 
> Happy holidays and I hope everyone is looking forward to 2008 with as  
> much anticipation as I am.
> 
> Bob

Bob:

I’ve been thinking along those same lines as well.

I actually am spending about 50% of my time doing security development  
for the OLPC (Nortel  
is a sponsor of OLPC, and through some internal deals, I got to spend  
50% of my time on  
OLPC for the last several months).

I did do some paper-tiger designs for a simple front-end to the audio  
subsystem for HF reception.  
But I was told my time was better spent on other things…

–

Marcus L. Mail: Dept 1A12, M/S: 04352P16  
Security Standards Advisor Phone: (ESN) 393-9145 +1 613 763 9145  
Strategic Standards  
Nortel Networks removed\_email\_address@domain.invalid

---

<div class="post-metadata">

**Author:** ![Robert\_McGwier](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/r/c68b51/32.png) [@Robert\_McGwier](https://www.ruby-forum.com/u/Robert_McGwier)\
**Post date:** [December 22, 2007, 5:05am UTC](https://www.ruby-forum.com/t/olpc/123889/3 "2007-12-22T05:05:37Z")

</div>

> The thing does appear to have sufficient horsepower to do some DSP.  
> I would like to think we can make several things available to this  
> project. For example, I think a tunable HF receiver for shortwave AM  
> broadcast is easiy achievable for very modest cost. Further out, I  
> would to see the use of this machine and OFDM skywave to provide WAN  
> capability to large areas of the world without such capability.

If we were given a square inch of circuit board space, twenty cents  
for components and wires and connectors, four pins, 0.2 watts of power  
when operating, and half a million gates colocated with the CPU and  
memory bus, what radio capabilities could we offer to the next  
generation OLPC project?

That’s the fun challenge. Here’s some background.

The reason software radio hardware has always cost so much is that it  
ships in low volumes. The oscilloscope boards we started with were  
$1400. The USRP is many hundreds, and the USRP-2 will be more. But  
if the USRP’s RF I/O capability was integrated onto a high volume  
motherboard, it would cost a lot less – maybe $50 or $25. If it was  
integrated into a chipset, even cheaper. Similar but specialized  
wireless capabilities are in USB wifi dongles that _retail_ for $40.

Today’s children’s XO laptop is just the first in a series of high  
volume, low cost laptops – from a variety of vendors. We can assume  
that with each generation they will get faster, lower power, and  
cheaper – as we learn more about how to design and build in that  
problem space. (Until Dec 31, you can buy one for $400 – and a  
second one will go free to a kid in a developing country. After that,  
they won’t be sold at retail. See [http://laptopgiving.org](http://laptopgiving.org).)

For the next generation effort, if they have the design time, they are  
likely to build a big custom chip that integrates a whole CPU, and a  
pile of system and peripheral circuitry. Their stretch goal is a  
$50/ea laptop for kids, one that’s much better than the current $200  
one.

We know they will want 2-channel sound in and out. They have  
already jiggered their current hardware so that the audio biases and  
filters can be switched out of the circuit, so that ordinary low  
voltage sources and sensors can be plugged into the audio port and  
used to sample real-world sensors. They have full control of the  
drivers, since they’re basing the whole thing on Linux, and they have  
real kernel hackers and real GUI hackers and such. Their system  
already uses wireless WiFi, so it has antennas, and they’ve done a  
detailed radio analysis of the package and design.

The difference between this design effort and the other things the GNU  
Radio crew has done is that the result has to cost only incremental  
pennies, cost zero power when not running, and run on batteries when  
running. On the other hand, gates and connectors and small antennas  
come almost free (they’re making hard-tooled plastic molds anyway;  
adding a connector or other wires is simple). Assuming their basic  
design provided roughly their current sound and analog input  
capabilities, what could we recommend that they do in order to make  
the platform much more capable for SDR?

My first thought is to just increase the sample rate and effective  
bits per sample of the audio processing hardware, and increase the  
number of channels so that ordinary stereo audio can happen  
simultaneously with analog I/O. I think it’s a crime that cheap  
analog I/O chips top out at 200 kilosamples per second.

Even making it able to receive AM-band and below, by plugging in a  
wire of appropriate length as antenna, would provide years of  
experimentation in the schools. Should the analog circuitry be  
wired up to the existing “cat ear” antennas on the laptop (which  
are currently only used by the WiFi chip)?

The analog circuitry would need to be switchable for use in three  
domains: audio (speaker/mic), DC analog (sensors), and radio analog  
(SDR).

Could we make it usefully transmit? Many of Matt’s transceiver  
daughterboard designs are very similar – with only a few components  
changed to set the frequency range. If made in high volumes on an  
existing board, what would the cost come down to? Could we shrink a  
single band transceiver into the above constraint? Could we design a  
cheap multi-band transceiver that lets these components be switched  
under software control? Can the CPU and the free signal processing  
gates automatically measure and compensate for cheap  
(signal-distorting) analog circuitry?

What kind of signal processing math hardware should we add to the  
custom chip, assuming that the CPU itself would be low power/low  
heat/low performance for its time? Should this be a CPU math  
accelerator, or should it be wired to the digitization hardware?  
Should it do one thing well (if so, what?) or be more general like  
traditional x86/PPC/etc DSP instruction sets?

Should we suggest making some of “our” gates of the custom chip into a  
field programmable gate array, reconfigurable in software? If so,  
what would we _use_ that capability for (as opposed to putting in hard  
circuitry)?

Even a receive-only SDR platform that makes it out to millions of  
third world kids would be a brilliant achievement. (And if we could  
get inside their Marvell wireless-mesh chip, we would probably end up  
with lots more capabilities in the WiFi bands, too.)

John

---

<div class="post-metadata">

**Author:** ![Robert\_McGwier](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/r/c68b51/32.png) [@Robert\_McGwier](https://www.ruby-forum.com/u/Robert_McGwier)\
**Post date:** [December 22, 2007, 5:47am UTC](https://www.ruby-forum.com/t/olpc/123889/4 "2007-12-22T05:47:07Z")

</div>

John G. wrote:

> My first thought is to just increase the sample rate and effective  
> bits per sample of the audio processing hardware, and increase the  
> number of channels so that ordinary stereo audio can happen  
> simultaneously with analog I/O. I think it’s a crime that cheap  
> analog I/O chips top out at 200 kilosamples per second.

I think that adding a fast, complex, sampler capable of doing many  
megasamples, with  
DMA support, etc, would be a worthy goal. A little anti-alias  
filtering and some  
digitally-controllable gain (70dB or more) in front of the samplers,  
and you have  
yourself a nice little HF receiver. I wonder if you could suck the  
entire 30Mhz  
of HF spectrum into the Geode in one gulp if there’s adequate DMA  
support, etc?

If not, you’d probably like some hardware-based DDCs and decimators,  
etc.

---

<div class="post-metadata">

**Author:** ![Robert\_McGwier](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/r/c68b51/32.png) [@Robert\_McGwier](https://www.ruby-forum.com/u/Robert_McGwier)\
**Post date:** [December 22, 2007, 5:31am UTC](https://www.ruby-forum.com/t/olpc/123889/5 "2007-12-22T05:31:55Z")

</div>

John –

Have you looked at all at the Siren board? It’s part of the HPSDR and  
Suitsat II projects: a low-power, low-cost SDR engine using the dsPIC33F  
embedded controller from Microchip. The current design uses 10 MHz RF in  
and  
out, and the QSD and QSE for complex sampling and excitation. There is  
also  
an onboard TI stereo codec for I/O in the audio range. Digital data can  
be  
synchronously imported and exported over one or more SPI buses.

It’s not perfectly general. Many of the algorithms we’d like to run on  
it  
need to be tailored to the hardware in a way that’s more constrained  
than  
we’d like in general. That notwithstanding, it should be capable of  
handling  
48 kHz bandwidth, and muxing and demuxing several channels within that  
span.

So far, as far as I know, only prototypes and first-gen boards are in  
circulation. The power consumption is already very low; there’s a lot of  
board real estate eligible for shrinking as well.

Frank

---

<div class="post-metadata">

**Author:** ![Robert\_McGwier](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/r/c68b51/32.png) [@Robert\_McGwier](https://www.ruby-forum.com/u/Robert_McGwier)\
**Post date:** [December 24, 2007, 11:12pm UTC](https://www.ruby-forum.com/t/olpc/123889/6 "2007-12-24T23:12:27Z")

</div>

As preface, I’m not a radio engineer. I’m a software guy with  
pretentions to understanding digital hardware. I have a few signal  
processing books on a dusty shelf. You lose me as soon as you start  
talking “Q signals”.

The Odyssey board operates at 10MHz IF; so wouldn’t it need an external  
tuner?

> I am in agreement with Frank that we can currently do it for a few tens  
> of dollars ~$50 in small quantities and that include parts and boards.  
> We can even put together a prototype which will allow HF shortwave  
> reception from low bands through about 21 Mhz covering these bands:  
> [15m thru 120m]

What kind of antenna would this require? Something external to the  
laptop? Or something that could be built into the plastic case?

> The dsPIC33 has more than enough horsepower to provide good  
> (synchronous) detected AM and even some modest AGC.

We won’t need a processor; the laptop will come with a processor much  
faster than 40 MIPS. (The current XO CPU is a Geode LX 433 MHz x86,  
with MMX, 3DNow, and some SSE instructions.)

> We need a DDS and a QSD (we do not need the QSE for the receive only  
> version) if we are going to tune the HF shortwave broadcast bands and  
> get reasonable performance at low cost.

I think that single chips are available that do broadcast-band AM and  
FM decoding for cheap; has nobody done this for the television and  
shortwave bands? Or is the problem that nobody’s done this digitally?

If we can provide something that gives real benefit for the target  
kids, we shouldn’t be dogmatic about analog versus digital.  
Alternatively, if OLPC provided a million-unit order for a digital  
tuner chip that would target all these bands, others could then buy the  
cheap chip for a variety of projects.

> This would provide a clear example of how it could be done. It does not  
> meet the price point, but it shows the capabilities and then we can  
> negotiate.

I’m glad you-all are pointing out low volume prototypes. I hope we’ll  
get someone interested who has designed high volume digital radio  
electronics. High volume ~= million-unit. (Do any people like this  
exist? Perhaps Matt’s bluetooth design has shipped in that quantity;  
WiFi does too.) There’s already an entire high speed digital radio  
transceiver in the existing XO: it’s the Marvell “Libertas” WiFi  
88W8388 controller chip and 88W8015 radio chip. It’s reprogrammable,  
though the ARM code that runs in it isn’t open source yet (the high  
level code can be open sourced, but it runs on a proprietary RTOS).

I think the best strategy for a $50 laptop’s radio would be to have  
either an internal antenna or a single connector; a small number of  
cheap analog components; perhaps _one_ analog/digital chip (multi  
channel DAC/ADC “radio chip”); and stuff _everything_ else into a  
corner of the digital system-on-chip that implements the rest of the  
laptop. It’s hard to prototype such a thing, though perhaps using an  
FPGA that come with a fast embedded MIPS or ARM CPU would be the  
closest.

The current XO uses two custom chips (the DCON display controller, and  
the CAFE camera/flash/SD controller), some very custom “mesh” firmware  
for the ARM core inside the WiFi chip, and some very custom firmware  
for the EC embedded controller battery charger chip. A $50 laptop  
version would probably mash all these chips together with the CPU,  
GPU, and its “southbridge” support chip, leaving only one  
system-on-chip, plus flash, DRAM, a few external analog chips, and a  
pile of analog electronics for power supply and such.

John

---

<div class="post-metadata">

**Author:** ![Robert\_McGwier](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/r/c68b51/32.png) [@Robert\_McGwier](https://www.ruby-forum.com/u/Robert_McGwier)\
**Post date:** [December 22, 2007, 9:44pm UTC](https://www.ruby-forum.com/t/olpc/123889/7 "2007-12-22T21:44:32Z")

</div>

John G. wrote:

> memory bus, what radio capabilities could we offer to the next  
> generation OLPC project?
> 
> That’s the fun challenge. Here’s some background.

I am in agreement with Frank that we can currently do it for a few tens  
of dollars ~$50 in small quantities and that include parts and boards.  
We can even put together a prototype which will allow HF shortwave  
reception from low bands through about 21 Mhz covering these bands:

# 15 meters – 18.90–19.02 MHz – Seldom used.

# 16 meters – 17.48–17.90 MHz – Day reception good, night reception

varies seasonally, with summer being the best.

# 19 meters –15.00–15.825 MHz – Day reception good, night reception

variable, best during summer. Time stations such as WWV are clustered  
around 15 MHz.

# 22 meters – 13.57–13.87 MHz – Similar to 19 meters; best in summer.

# 25 meters – 11.50–12.16 MHz – Generally best during summer; said to be

ideal during the period before and after sunset.

# 31 meters – 9250–9995 kHz – Good year-round night band; seasonal

during the day, with best reception in winter. Time stations are  
clustered around 10 MHz.

# 41 meters – 7100–7600 kHz – Reception varies by region – reasonably

good night reception, but few transmitters in this band are targeted to  
North America.

# 49 meters – 5800–6300 kHz – Good year-round night band; daytime

reception is lacking.

# 60 meters – 4400–5100 kHz – Mostly used locally in tropical regions,

though usable at night. Time stations are clustered around 5000 kHz.

# 75 meters – 3900–4050 kHz – Mostly used in Eastern Hemisphere, not

widely received in the Americas.

# 90 meters – 3200–3400 kHz – Mostly used locally in tropical regions,

with limited long-distance reception at night.

# 120 meters – 2300–2495 kHz – Mostly used locally in tropical regions,

with time stations clustered around 2500 kHz. Not technically a  
shortwave band; resides in the upper reaches of the medium wave band

The dsPIC33 has more than enough horsepower to provide good  
(synchronous) detected AM and even some modest AGC.

We need a DDS and a QSD (we do not need the QSE for the receive only  
version) if we are going to tune the HF shortwave broadcast bands and  
get reasonable performance at low cost.

This would provide a clear example of how it could be done. It does not  
meet the price point, but it shows the capabilities and then we can  
negotiate.

Bob

–  
AMSAT Director and VP Engineering. Member: ARRL, AMSAT-DL,  
TAPR, Packrats, NJQRP, QRP ARCI, QCWA, FRC. ARRL SDR WG Chair  
“An optimist may see a light where there is none, but why  
must the pessimist always run to blow it out?” Descartes

---

<div class="post-metadata">

**Author:** ![Robert\_McGwier](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/r/c68b51/32.png) [@Robert\_McGwier](https://www.ruby-forum.com/u/Robert_McGwier)\
**Post date:** [December 25, 2007, 12:10am UTC](https://www.ruby-forum.com/t/olpc/123889/8 "2007-12-25T00:10:56Z")

</div>

On Mon, Dec 24, 2007 at 02:11:34PM -0800, John G. wrote:

> I’m glad you-all are pointing out low volume prototypes. I hope we’ll  
> get someone interested who has designed high volume digital radio  
> electronics. High volume ~= million-unit. (Do any people like this  
> exist? Perhaps Matt’s bluetooth design has shipped in that quantity;  
> WiFi does too.) There’s already an entire high speed digital radio  
> transceiver in the existing XO: it’s the Marvell “Libertas” WiFi  
> 88W8388 controller chip and 88W8015 radio chip. It’s reprogrammable,  
> though the ARM code that runs in it isn’t open source yet (the high  
> level code can be open sourced, but it runs on a proprietary RTOS).

You may be disappointed what you can accomplish with the ARM  
microcontroller. It is not responsible for mod/demod. Those functions  
are in silicon.

If Marvell would publish the 88W8388 and 88W8015 documentation, it  
would jumpstart some open-source development. Source code is a poor  
replacement for proper chipset documentation.

Dave

–  
David Young OJC Technologies  
removed\_email\_address@domain.invalid Urbana, IL \* (217) 278-3933 ext 24

---

<div class="post-metadata">

**Author:** ![Robert\_McGwier](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/r/c68b51/32.png) [@Robert\_McGwier](https://www.ruby-forum.com/u/Robert_McGwier)\
**Post date:** [December 25, 2007, 5:54am UTC](https://www.ruby-forum.com/t/olpc/123889/9 "2007-12-25T05:54:33Z")

</div>

On Dec 24, 2007 5:11 PM, John G. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) wrote:

The Odyssey board operates at 10MHz IF; so wouldn’t it need an external

> tuner?

Yes, but many different tuners (band sets) can be serviced by the same  
IF  
processor.

> What kind of antenna would this require? Something external to the  
> laptop? Or something that could be built into the plastic case?

Depending on the band it could be either or both. A multiloop MW/HF  
could be  
embedded in the plastic case. A gender-bent SMA could accommodate a wide  
variety of V/U/SHF antennas.

> We won’t need a processor; the laptop will come with a processor much  
> faster than 40 MIPS. (The current XO CPU is a Geode LX 433 MHz x86,  
> with MMX, 3DNow, and some SSE instructions.)

We can argue that a “radio coprocessor” would greatly enhance the range  
of  
possibilities – DRM (Digital Radio Mondiale) for example, and see  
below.

> > We need a DDS and a QSD (we do not need the QSE for the receive only  
> > version) if we are going to tune the HF shortwave broadcast bands and  
> > get reasonable performance at low cost.
> 
> I think that single chips are available that do broadcast-band AM and  
> FM decoding for cheap; has nobody done this for the television and  
> shortwave bands? Or is the problem that nobody’s done this digitally?

Two problems. One is that the off-the-shelf chips use proprietary IP.  
The  
other is that the off-the-shelf chips are locked up and it’s next to  
impossible to do anything interesting with them that you can’t already  
do  
with a cheap external radio. I’m not aware of commercial devices that  
could  
be used to capture and detect _all_ of the signals within a 50 kHz  
bandwidth, which could probably be done with ease with the assistance of  
a  
radio coprocessor. This is an essential step towards “cognitive”  
functions  
– make the radio functions mutable and dynamic.

> I’m glad you-all are pointing out low volume prototypes…  
> I’d think in part we’d be providing not just sealed up applications but  
> also  
> programmable devices and an API, capable of being used in innovative  
> ways in  
> software _without_ requiring the chronic intervention of large-scale  
> chip  
> producers. Part of the SDR mission, isn’t it?

Regards  
Frank  
AB2KT

---

<div class="post-metadata">

**Author:** ![Robert\_McGwier](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/r/c68b51/32.png) [@Robert\_McGwier](https://www.ruby-forum.com/u/Robert_McGwier)\
**Post date:** [December 26, 2007, 12:05am UTC](https://www.ruby-forum.com/t/olpc/123889/10 "2007-12-26T00:05:05Z")

</div>

John G. wrote:

> What kind of antenna would this require? Something external to the  
> laptop? Or something that could be built into the plastic case?  
> Gotta go with an external antenna, hopefully something like an RCA  
> plug. If we’re trying to encourage kids in developing nations to get  
> into technology, this would be it. That’s how I got started twenty  
> years ago, with a long-wire connected to an RCA plug, which isn’t too  
> much real-estate on the case.

DRM is pretty cool and has the /potential/ to provide the kids with a  
multimedia experience, even if it takes two laptops “chained” together  
to decode the signals…

Dave

---

<div class="post-metadata">

**Author:** ![Robert\_McGwier](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/r/c68b51/32.png) [@Robert\_McGwier](https://www.ruby-forum.com/u/Robert_McGwier)\
**Post date:** [December 26, 2007, 3:26am UTC](https://www.ruby-forum.com/t/olpc/123889/11 "2007-12-26T03:26:14Z")

</div>

On Dec 25, 2007 6:05 PM, David H. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) wrote:

> DRM is pretty cool and has the /potential/ to provide the kids with a  
> multimedia experience, even if it takes two laptops “chained” together  
> to decode the signals…

If the linking were in fact required, it would at least introduce the  
concept of distributed computing at a young age and, possibly, with a  
new and different perspective of how to accomplish some of the harder  
tasks.

Since there is a pretty serious size, weight and power (SWAP)  
restriction when dealing with something like the OLPC, complete  
integration is key. I’ve been eyeing a Maxim Analog Front End (AFE)  
that is dual channel, 10-bits and is extremely low power and cost.

```
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/5163

```

Although $9.85@1k is a little steep, it’s also the cheapest and most  
fully featured low-power AFE I’ve really seen and at 7mm x 7mm, it’s  
almost trivial for real estate.

Given this core technology, and Matt’s experience in IC design coupled  
with the quantities an OLPC will be shipping in, it might be possible  
to negotiate with Maxim to throw the current CIC filters +  
programmable decimating FIR filter along with this core on some  
silicon for not much or any more money - basically a hardened  
low-power USRP that can hang off the ARM in a memory mapped area.

The potential is there for sure.

Brian

---

<div class="post-metadata">

**Author:** ![Robert\_McGwier](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/r/c68b51/32.png) [@Robert\_McGwier](https://www.ruby-forum.com/u/Robert_McGwier)\
**Post date:** [December 25, 2007, 8:41pm UTC](https://www.ruby-forum.com/t/olpc/123889/12 "2007-12-25T20:41:54Z")

</div>

Frank B. wrote:

> On Dec 24, 2007 5:11 PM, John G. \<removed\_email\_address@domain.invalid  
> [mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)\> wrote:
> 
> ```
> The Odyssey board operates at 10MHz IF; so wouldn't it need an external
> tuner?
> 
> ```
> 
> Yes, but many different tuners (band sets) can be serviced by the same  
> IF processor.

Not to mention that Odyssey can take a few dollar DDS input in place of  
the crystal and tune all of the HF shortwave bands. The performance  
will go DOWN because of the spurs generated by the inexpensive DDS but  
that is probably acceptable as opposed to people not having a shortwave  
radio at all or only those they cannot afford. Further, to increase  
performance, some kind of band switching apparatus, strictly for front  
end filtering changes, needs to be provided.

> ```
> We won't need a processor; the laptop will come with a processor much
> faster than 40 MIPS. (The current XO CPU is a Geode LX 433 MHz x86,
> with MMX, 3DNow, and some SSE instructions.)
> 
> ```

The OLPC chip is capable and can run a small dedicated sdr/dsp core to  
do many functions. I would like to see us offload stuff on to some kind  
of helping processor so we could do more than just 5 kHz wide AM/SSB, or  
NBFM, etc.

> bandwidth, which could probably be done with ease with the assistance of  
> \> This would provide a clear example of how it could be done. It  
> of large-scale chip producers. Part of the SDR mission, isn’t it?  
> Open Standards, open source, free infrastructure? That is a little  
> radical isn’t it? Should that be our mission?

I certainly hope so. That is my life’s mission, which I am grateful in  
the extreme that my employer is allowing me to pursue with a vengeance  
and with (probably) more clout than I deserve. I am determined to help  
end the repeated purchase of, and closed system support of,  
infrastructure that should be available to all (and which we are tired  
of paying for over and over and over). With this freeing of resources,  
we would be leaving the companies, individuals, governments, students,  
WHATEVER, to innovate ON TOP of that already done infrastructure. Think  
of how much more productive the existing money pool would be if almost  
ALL infrastructure code was free (operating systems, word processors,  
spreadsheet, radio basic functions, etc.) and we were not having  
companies, governments, etc. repeatedly paying for the same closed  
system infrastructure to be done as well as the huge support tail for  
maintaining it. Then companies would be free to spend lots more of their  
money on innovation, creativity, and more, held back then mostly by the  
huge part that must go to lawyers to make sure they have a sufficiently  
large patent portfolio to defend the innovation (Can we stop that next?)  
I just don’t understand why all of the corporate, government,  
educational, etc. world is not HOWLING for free, open standards based,  
and preferably open source infrastructure code for almost everything and  
the end of this closed system and amassing of patent portfolios spending  
completely unproductive money (and more importantly time) on lawyers. I  
have two friends, one of them for about 25 years. Both are brilliant  
engineers, and are members of these mail groups. One has a name that  
will be known, and live long after he is dead and gone. He is now  
spending almost ALL of his time helping lawyers make the existing  
corporate portfolio fit the “crime”. It is an utterly ridiculous waste  
of a great mind.

Sigh, don’t get me really started. I might yield an opinion!

The second generation OLPC, which I hope is on the drawing board, should  
have inexpensive radio, done by software in every way possible, to give  
the OLPC recipient access to communications with the rest of the world.  
I suggest that we contact a few companies, such as Microchip and ask  
how much for a dsPIC33 in quantity 1 million? But we have the OLPC  
going out the door today. If it fails, I think OLPCv2 is going to have  
a hard time going forward. There are already “nay sayers” and  
competitors with questionable agendas showing up. If an inexpensive  
external device could be done for the OLPC, using its existing  
processor, that would be a very nice first step. We could indeed build  
a transceiver with that. John’s price point, power and size constraints  
seems to limit us almost completely to a receive only device. Maybe  
that is as it should be but I just want that argued and accepted clearly  
as the correct goal. With the external device, done in quantity to  
reduce costs, we could more easily have a transceiver. If that is not  
desirable, then so be it.

Ordering from Digikey, we could build an HF receiver interface using  
QSD and a DDS plugging into the USB port on the OLPC for ~ $30 at  
quantity 1500 with the most expensive part being the DDS and accounting  
for nearly 1/2 of the cost. That says to me that if we got the  
quantities well up from 1500, we could get the price down significantly  
but I just do not see it getting down to under $1. We need to add SMT  
based bandpass filtering.

Maybe a device like this one:

[http://rfdesign.com/rfic/radioscape\_chip\_frontend/](http://rfdesign.com/rfic/radioscape_chip_frontend/)

Done by this company:

[http://www.radioscape.com/](http://www.radioscape.com/)

could be made in large quantities at low cost but under $1? I have my  
doubts that it and others like can be unless some players in industry  
are going to step up and provide these kinds of pieces to us. For us to  
succeed in the quest for the lowest cost devices, it is my opinion that  
we have to find EXISTING technology, learn how to use it, and then try  
to convince the owner/developer of the IP that there is a serious  
business case for getting it to us cheaply.

> Regards  
> Frank  
> AB2KT

Season’s greeting to all and Happy New Year.  
Bob McGwier

–  
AMSAT Director and VP Engineering. Member: ARRL, AMSAT-DL,  
TAPR, Packrats, NJQRP, QRP ARCI, QCWA, FRC. ARRL SDR WG Chair  
“An optimist may see a light where there is none, but why  
must the pessimist always run to blow it out?” Descartes
