# No Source in GRC after installing rtl-sdr and gr-osmosdr **URL:** \ **Category:** GNU Radio\ **Created:** [November 24, 2014, 4:39pm UTC](https://www.ruby-forum.com/t/no-source-in-grc-after-installing-rtl-sdr-and-gr-osmosdr/233210 "2014-11-24T16:39:18Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![addis\_a](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/a/c4cdca/32.png) [@addis\_a](https://www.ruby-forum.com/u/addis_a)\ **Post date:** [November 24, 2014, 4:39pm UTC](https://www.ruby-forum.com/t/no-source-in-grc-after-installing-rtl-sdr-and-gr-osmosdr/233210/1 "2014-11-24T16:39:18Z")
Hey, I just tried to setup Gnuradio (3.7.5) with my RTL2832U DVB-T dongle. 1. First I installed Gnuradio via “sudo zypper install gnuradio”. Gnuradio-Companion starts and everything seems to work fine. 2. Then I installed the rtl-sdr driver as described on Osmocom’s Website. “rtl\_test -t” works as well. 3. Finally I installed gr-osmosdr and opened Gnuradio-Companion but there is no Source field where I can select my RTL2832 dongle… So does anyone know what I did wrong? Is it because of my operation system: the new OpenSuse 13.2? Or is there an error in the cmake process of gr-osmosdr (I put the output at the end of the post)? It would be great if someone could help me. Thanks! Marius cmake output: foxey@linux-ulka:~/Downloads/gr-osmosdr/build\> cmake …/ – The CXX compiler identification is GNU 4.8.3 – The C compiler identification is GNU 4.8.3 – Check for working CXX compiler: /usr/bin/c++ – Check for working CXX compiler: /usr/bin/c++ – works – Detecting CXX compiler ABI info – Detecting CXX compiler ABI info - done – Check for working C compiler: /usr/bin/cc – Check for working C compiler: /usr/bin/cc – works – Detecting C compiler ABI info – Detecting C compiler ABI info - done – Build type not specified: defaulting to release. – Found Git: /usr/bin/git (found version “2.1.2”) – Extracting version information from git describe… – Configuring Boost C++ Libraries… – Boost version: 1.54.0 – Found the following Boost libraries: – thread – system – Found PkgConfig: /usr/bin/pkg-config (found version “0.28”) Checking for GNU Radio Module: RUNTIME – checking for module ‘gnuradio-runtime’ – found gnuradio-runtime, version 3.7.6git - INCLUDES=/usr/local/include - LIBS=/usr/local/lib/libgnuradio-runtime.so;/usr/local/lib/libgnuradio-pmt.so – Found GNURADIO\_RUNTIME: /usr/local/lib/libgnuradio-runtime.so;/usr/local/lib/libgnuradio-pmt.so GNURADIO\_RUNTIME\_FOUND = TRUE Checking for GNU Radio Module: BLOCKS – checking for module ‘gnuradio-blocks’ – found gnuradio-blocks, version 3.7.6git - INCLUDES=/usr/local/include - LIBS=/usr/local/lib/libgnuradio-blocks.so;/usr/local/lib/libgnuradio-runtime.so;/usr/local/lib/libgnuradio-pmt.so – Found GNURADIO\_BLOCKS: /usr/local/lib/libgnuradio-blocks.so;/usr/local/lib/libgnuradio-runtime.so;/usr/local/lib/libgnuradio-pmt.so GNURADIO\_BLOCKS\_FOUND = TRUE Checking for GNU Radio Module: PMT – checking for module ‘gnuradio-runtime’ – found gnuradio-runtime, version 3.7.6git - INCLUDES=/usr/local/include - ## LIBS=/usr/local/lib/libgnuradio-runtime.so;/usr/local/lib/libgnuradio-pmt.so – Found GNURADIO\_PMT: /usr/local/lib/libgnuradio-runtime.so;/usr/local/lib/libgnuradio-pmt.so GNURADIO\_PMT\_FOUND = TRUE – checking for module ‘gnuradio-iqbalance’ – package ‘gnuradio-iqbalance’ not found – Could NOT find GNURADIO\_IQBALANCE (missing: GNURADIO\_IQBALANCE\_LIBRARIES GNURADIO\_IQBALANCE\_INCLUDE\_DIRS) – checking for module ‘uhd’ – package ‘uhd’ not found – checking for module ‘gnuradio-uhd’ – found gnuradio-uhd, version 3.7.5 – Found gnuradio-uhd: /usr/include, /usr/lib64/libgnuradio-uhd.so – Found GNURADIO\_UHD: /usr/lib64/libgnuradio-uhd.so – checking for module ‘gnuradio-fcd’ – found gnuradio-fcd, version 3.7.6git – Found gnuradio-fcd: /usr/local/include, /usr/local/lib/libgnuradio-fcd.so – Found GNURADIO\_FCD: /usr/local/lib/libgnuradio-fcd.so – checking for module ‘gnuradio-fcdproplus’ – package ‘gnuradio-fcdproplus’ not found – gnuradio-fcdproplus not found. – Could NOT find GNURADIO\_FCDPP (missing: GNURADIO\_FCDPP\_LIBRARIES GNURADIO\_FCDPP\_INCLUDE\_DIRS) – checking for module ‘libosmosdr’ – package ‘libosmosdr’ not found – libosmosdr not found. – checking for module ‘librtlsdr’ – found librtlsdr, version v0.5.3-6-gd447 – Found librtlsdr: /usr/local/include, /usr/local/lib/librtlsdr.so – checking for module ‘libmirisdr’ – package ‘libmirisdr’ not found – libmirisdr not found. – checking for module ‘libhackrf’ – package ‘libhackrf’ not found – Could NOT find LIBHACKRF (missing: LIBHACKRF\_LIBRARIES LIBHACKRF\_INCLUDE\_DIRS) – checking for module ‘libairspy’ – package ‘libairspy’ not found – Could NOT find LIBAIRSPY (missing: LIBAIRSPY\_LIBRARIES LIBAIRSPY\_INCLUDE\_DIRS) – checking for module ‘libbladeRF’ – package ‘libbladeRF’ not found – libbladeRF not found. – Found Doxygen: /usr/bin/doxygen (found version “1.8.8”) – Found PythonLibs: /usr/lib64/libpython2.7.so (found suitable version “2.7.8”, minimum required is “2”) – Could NOT find SWIG (missing: SWIG\_EXECUTABLE SWIG\_DIR) ## – The build system will automatically enable all components. – Use -DENABLE\_DEFAULT=OFF to disable components by default. ## – Configuring Python support support… – Dependency PYTHONLIBS\_FOUND = TRUE – Dependency SWIG\_FOUND = FALSE – Dependency SWIG\_VERSION\_CHECK = – Disabling Python support support. – Override with -DENABLE\_PYTHON=ON/OFF ## – Configuring Osmocom IQ Imbalance Correction support… – Dependency GNURADIO\_IQBALANCE\_FOUND = FALSE – Disabling Osmocom IQ Imbalance Correction support. – Override with -DENABLE\_IQBALANCE=ON/OFF ## – Configuring sysmocom OsmoSDR support… – Dependency LIBOSMOSDR\_FOUND = FALSE – Disabling sysmocom OsmoSDR support. – Override with -DENABLE\_OSMOSDR=ON/OFF ## – Configuring FUNcube Dongle support… – Dependency GNURADIO\_FCD\_FOUND = TRUE – Enabling FUNcube Dongle support. – Override with -DENABLE\_FCD=ON/OFF ## – Configuring FUNcube Dongle Pro+ support… – Dependency GNURADIO\_FCDPP\_FOUND = FALSE – Disabling FUNcube Dongle Pro+ support. – Override with -DENABLE\_FCDPP=ON/OFF ## – Configuring IQ File Source support… – Dependency GNURADIO\_BLOCKS\_FOUND = TRUE – Enabling IQ File Source support. – Override with -DENABLE\_FILE=ON/OFF ## – Configuring Osmocom RTLSDR support… – Dependency LIBRTLSDR\_FOUND = TRUE – Enabling Osmocom RTLSDR support. – Override with -DENABLE\_RTL=ON/OFF ## – Configuring RTLSDR TCP Client support… – Dependency GNURADIO\_BLOCKS\_FOUND = TRUE – Enabling RTLSDR TCP Client support. – Override with -DENABLE\_RTL\_TCP=ON/OFF ## – Configuring Ettus USRP Devices support… – Dependency UHD\_FOUND = 0 – Dependency GNURADIO\_UHD\_FOUND = TRUE – Disabling Ettus USRP Devices support. – Override with -DENABLE\_UHD=ON/OFF ## – Configuring Osmocom MiriSDR support… – Dependency LIBMIRISDR\_FOUND = FALSE – Disabling Osmocom MiriSDR support. – Override with -DENABLE\_MIRI=ON/OFF ## – Configuring HackRF Jawbreaker support… – Dependency LIBHACKRF\_FOUND = FALSE – Disabling HackRF Jawbreaker support. – Override with -DENABLE\_HACKRF=ON/OFF ## – Configuring nuand bladeRF support… – Dependency LIBBLADERF\_FOUND = FALSE – Disabling nuand bladeRF support. – Override with -DENABLE\_BLADERF=ON/OFF ## – Configuring RFSPACE Receivers support… – Enabling RFSPACE Receivers support. – Override with -DENABLE\_RFSPACE=ON/OFF ## – Configuring AIRSPY Receiver support… – Dependency LIBAIRSPY\_FOUND = FALSE – Disabling AIRSPY Receiver support. – Override with -DENABLE\_AIRSPY=ON/OFF ## – ###################################################### – # Gnuradio enabled components – ###################################################### – \* FUNcube Dongle – \* IQ File Source – \* Osmocom RTLSDR – \* RTLSDR TCP Client – \* RFSPACE Receivers ## – ###################################################### – # Gnuradio disabled components – ###################################################### – \* Python support – \* Osmocom IQ Imbalance Correction – \* sysmocom OsmoSDR – \* FUNcube Dongle Pro+ – \* Ettus USRP Devices – \* Osmocom MiriSDR – \* HackRF Jawbreaker – \* nuand bladeRF – \* AIRSPY Receiver – Building for version: v0.1.4-2-g8d9e6b58 / 0.1.5git – Using install prefix: /usr/local – Configuring done – Generating done – Build files have been written to: /home/foxey/Downloads/gr-osmosdr/build