# Ngx\_openresty 1.0.9.10 (stable) released **URL:** \ **Category:** NGINX\ **Created:** [November 16, 2011, 4:32am UTC](https://www.ruby-forum.com/t/ngx-openresty-1-0-9-10-stable-released/213913 "2011-11-16T04:32:12Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![dubstep](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/d/cdc98d/32.png) [@dubstep](https://www.ruby-forum.com/u/dubstep)\ **Post date:** [November 16, 2011, 4:32am UTC](https://www.ruby-forum.com/t/ngx-openresty-1-0-9-10-stable-released/213913/1 "2011-11-16T04:32:12Z")
Hello, folks! I’m happy to announce that the new stable release of ngx\_openresty, 1.0.9.10, has just been kicked out of door: [OpenResty® - Open source](http://openresty.org/#Download) This is the first stable release of ngx\_openresty that is based on the Nginx core 1.0.9. Special thanks go to all our contributors and users for helping make this release happen 🙂 Here goes the complete change log for this release, as compared to the last stable release, 1.0.8.26, released two weeks ago: - upgraded the Nginx core to 1.0.9. - applied the epoll\_check\_stale\_wev patch[http://mailman.nginx.org/pipermail/nginx-devel/2011-November/001408.html](http://mailman.nginx.org/pipermail/nginx-devel/2011-November/001408.html)to the Nginx 1.0.9 core. this issue affected PostgresNginxModule when connecting to a remote PostgreSQL server over a slow network. thanks @XX [http://weibo.com/u/1878897190](http://weibo.com/u/1878897190). - bugfix: nginx-1.0.9-variable\_header\_ignore\_no\_hash.patch[https://github.com/agentzh/ngx\_openresty/blob/master/patches/nginx-1.0.9-variable\_header\_ignore\_no\_hash.patch](https://github.com/agentzh/ngx_openresty/blob/master/patches/nginx-1.0.9-variable_header_ignore_no_hash.patch)might introduce a memory overflow issue in multi-header variables. thanks Markus Linnala. - bugfix: fixed the error message length while the ./configure script fails. - feature: applied a patch[https://github.com/agentzh/ngx\_openresty/blob/master/patches/nginx-1.0.9-log\_escape\_non\_ascii.patch](https://github.com/agentzh/ngx_openresty/blob/master/patches/nginx-1.0.9-log_escape_non_ascii.patch)to add new directives log\_escape\_non\_ascii to prevent escaping non-ascii bytes in access log variable values. requested by @ [http://weibo.com/egis](http://weibo.com/egis). It can be turned on and off, and default to on just as the standard Nginx version. - upgraded DrizzleNginxModule to 0.1.2rc4. - bugfix: fixed issues with poll, rtsig, and select used by the Nginx event model by eliminating the poll syscall performed by libdrizzle. This also gives rise to a nice speedup (about 10% in simple cases). - upgraded LuaNginxModule to 0.3.1rc28. - feature: added the ngx.encode\_args[http://wiki.nginx.org/HttpLuaModule#ngx.encode\_args](http://wiki.nginx.org/HttpLuaModule#ngx.encode_args)method to encode a Lua code to a URI query string. thanks ӱ ( 0597Ϻ [http://weibo.com/shrimp0597](http://weibo.com/shrimp0597)). - feature: ngx.location.capture[http://wiki.nginx.org/HttpLuaModule#ngx.location.capture](http://wiki.nginx.org/HttpLuaModule#ngx.location.capture)and ngx.exec [http://wiki.nginx.org/HttpLuaModule#ngx.exec](http://wiki.nginx.org/HttpLuaModule#ngx.exec) now supports the same Lua args table format as in ngx.encode\_args[http://wiki.nginx.org/HttpLuaModule#ngx.encode\_args](http://wiki.nginx.org/HttpLuaModule#ngx.encode_args). thanks ӱ (0597Ϻ [http://weibo.com/shrimp0597](http://weibo.com/shrimp0597)). - bugfix: Cache-Control header modification might introduce empty value headers when using with the standard ngx\_headers[http://wiki.nginx.org/HttpHeadersModule](http://wiki.nginx.org/HttpHeadersModule)module. - feature: added the ctx option to ngx.location.capture[http://wiki.nginx.org/HttpLuaModule#ngx.location.capture](http://wiki.nginx.org/HttpLuaModule#ngx.location.capture): you can now specify a custom Lua table to pass to the subrequest as its ngx.ctx [http://wiki.nginx.org/HttpLuaModule#ngx.ctx](http://wiki.nginx.org/HttpLuaModule#ngx.ctx). thanks @hugozhu[http://weibo.com/hugozhu](http://weibo.com/hugozhu) . - bugfix: fixed compatibility with nginx 0.8.54. thanks @0579Ϻ[http://weibo.com/shrimp0597](http://weibo.com/shrimp0597) . - upgraded HeadersMoreNginxModule to 0.16rc4. - bugfix: Cache-Control header modification might introduce empty value headers when using with the standard ngx\_headers[http://wiki.nginx.org/HttpHeadersModule](http://wiki.nginx.org/HttpHeadersModule)module. - upgraded PostgresNginxModule to 0.9rc2 - bugfix: now we log an error message when the postgres\_pass target is not found at all and returns 500 in this case instead of returning empty response. - bugfix: we should no longer return NGX\_AGAIN when the re-polling returns IO WAIT in case of the “connection made” state. - feature: added some debugging outputs which be enabled by passing the --with-debug option while building Nginx or OpenResty. - bugfix: fixed compatibility issues with Nginx 1.1.4+: ngx\_chain\_update\_chains now requires a pool argument. - upgraded LuaRdsParserLibrary to 0.04. - bugfix: fixed a serious memory leak reported by bearnard. - upgraded XssNginxModule to 0.03rc5. - bugfix: the callback argument value parser did not accept JavaScript identifier names started with underscores. thanks Sam Mulube. As always, you’re welcome to report bugs and feature requests either here or directly to me 🙂 It’ll also be highly appreciated to try out the devel releases (based on the Nginx core 1.0.10+) that are coming out later 😉 OpenResty (aka. ngx\_openresty) is a full-fledged web application server by bundling the standard Nginx core, lots of 3rd-party Nginx modules[http://wiki.nginx.org/3rdPartyModules](http://wiki.nginx.org/3rdPartyModules), as well as most of their external dependencies. By taking adantage of various well-designed Nginx modules, OpenResty effectively turns the nginx server into a powerful web app server, in which the web developers can use the Lua programming language to script various existing nginx C modules and Lua modules and construct extremely high-performance web applications that is capable to handle 10K+ connections. OpenResty aims to run your server-side web app completely in the Nginx server, leveraging Nginx’s event model to do non-blocking I/O not only with the HTTP clients, but also with remote backends like MySQL, PostgreSQL, Memcached, and Redis. You can find more details on the homepage of ngx\_openresty here: ``` http://openresty.org ``` Have fun! -agentzh ---
**Author:** ![agentzh](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/a/4da419/32.png) [@agentzh](https://www.ruby-forum.com/u/agentzh)\ **Post date:** [November 17, 2011, 1:34pm UTC](https://www.ruby-forum.com/t/ngx-openresty-1-0-9-10-stable-released/213913/2 "2011-11-17T13:34:37Z")
On Nov 15, 2011, at 10:31 PM, agentzh wrote: > I’m happy to announce that the new stable release of ngx\_openresty, 1.0.9.10, > has just been kicked out of door: Once again, thanks for doing this! –Brian