# Nginx make error, when --with-http\_perl\_module **URL:** \ **Category:** NGINX\ **Created:** [June 23, 2009, 9:31am UTC](https://www.ruby-forum.com/t/nginx-make-error-when-with-http-perl-module/170833 "2009-06-23T09:31:45Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![lankelan](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/l/c37758/32.png) [@lankelan](https://www.ruby-forum.com/u/lankelan)\ **Post date:** [June 23, 2009, 9:31am UTC](https://www.ruby-forum.com/t/nginx-make-error-when-with-http-perl-module/170833/1 "2009-06-23T09:31:45Z")
#./configure --user=elove --group=elove --prefix=/home/elove/app/nginx –with-http\_stub\_status\_module --with-http\_ssl\_module –with-openssl=/home/elove/openssl-0.9.8c --with-http\_perl\_module –with-perl=/usr/bin/perl –with-perl\_modules\_path=/home/elove/app/nginx/modules/perl/ checking for OS - Linux 2.6.18-8.el5xen i686 checking for C compiler … found - using GNU C compiler - gcc version: 4.1.1 20070105 (Red Hat 4.1.1-52) checking for gcc -pipe switch … found checking for gcc variadic macros … found checking for C99 variadic macros … found checking for unistd.h … found checking for inttypes.h … found checking for limits.h … found checking for sys/filio.h … not found checking for sys/param.h … found checking for sys/mount.h … found checking for sys/statvfs.h … found checking for crypt.h … found checking for Linux specific features checking for epoll … found checking for sendfile() … found checking for sendfile64() … found checking for sys/prctl.h … found checking for prctl(PR\_SET\_DUMPABLE) … found checking for sched\_setaffinity() … found checking for crypt\_r() … found checking for sys/vfs.h … found checking for poll() … found checking for /dev/poll … not found checking for kqueue … not found checking for crypt() … not found checking for crypt() in libcrypt … found checking for O\_DIRECT … found checking for F\_NOCACHE … not found checking for directio() … not found checking for statfs() … found checking for statvfs() … found checking for dlopen() … not found checking for dlopen() in libdl … found checking for sched\_yield() … found checking for PCRE library … found checking for zlib library … found checking for perl - perl version: v5.8.8 built for i386-linux-thread-multi - perl interpreter multiplicity found creating objs/Makefile checking for int size … 4 bytes checking for long size … 4 bytes checking for long long size … 8 bytes checking for void \* size … 4 bytes checking for uint64\_t … found checking for sig\_atomic\_t … found checking for sig\_atomic\_t size … 4 bytes checking for socklen\_t … found checking for in\_addr\_t … found checking for in\_port\_t … found checking for rlim\_t … found checking for uintptr\_t … uintptr\_t found checking for system endianess … little endianess checking for size\_t size … 4 bytes checking for off\_t size … 8 bytes checking for time\_t size … 4 bytes checking for setproctitle() … not found checking for pread() … found checking for pwrite() … found checking for strerror\_r() … found but is not working checking for gnu style strerror\_r() … found checking for localtime\_r() … found checking for posix\_memalign() … found checking for memalign() … found checking for mmap(MAP\_ANON|MAP\_SHARED) … found checking for mmap(“/dev/zero”, MAP\_SHARED) … found checking for System V shared memory … found checking for struct msghdr.msg\_control … found checking for ioctl(FIONBIO) … found checking for struct tm.tm\_gmtoff … found checking for struct dirent.d\_namlen … not found checking for struct dirent.d\_type … found Configuration summary - using system PCRE library - using OpenSSL library: /home/elove/openssl-0.9.8c - md5: using OpenSSL library - sha1 library is not used - using system zlib library nginx path prefix: “/home/elove/app/nginx” nginx binary file: “/home/elove/app/nginx/sbin/nginx” nginx configuration prefix: “/home/elove/app/nginx/conf” nginx configuration file: “/home/elove/app/nginx/conf/nginx.conf” nginx pid file: “/home/elove/app/nginx/logs/nginx.pid” nginx error log file: “/home/elove/app/nginx/logs/error.log” nginx http access log file: “/home/elove/app/nginx/logs/access.log” nginx http client request body temporary files: “client\_body\_temp” nginx http proxy temporary files: “proxy\_temp” nginx http fastcgi temporary files: “fastcgi\_temp” #make Omitted… cp -p src/http/modules/perl/nginx.\* objs/src/http/modules/perl/ cp -p src/http/modules/perl/typemap objs/src/http/modules/perl/ cp -p src/http/modules/perl/Makefile.PL objs/src/http/modules/perl/ cd objs/src/http/modules/perl && NGX\_PM\_CFLAGS="-D\_REENTRANT -D\_GNU\_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D\_LARGEFILE\_SOURCE -D\_FILE\_OFFSET\_BITS=64 -I/usr/include/gdbm -I/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE -g " NGX\_PCRE=YES NGX\_OBJS=objs /usr/bin/perl Makefile.PL LIB=/home/elove/app/nginx/modules/perl/ INSTALLSITEMAN3DIR=/home/elove/app/nginx/modules/perl//man3 Writing Makefile for nginx cp -p src/http/modules/perl/nginx.\* objs/src/http/modules/perl/ cd objs/src/http/modules/perl && make make[2]: Entering directory `/home/elove/nginx-0.7.60/objs/src/http/modules/perl' cp nginx.pm blib/lib/nginx.pm /usr/bin/perl /usr/lib/perl5/5.8.8/ExtUtils/xsubpp -typemap /usr/lib/perl5/5.8.8/ExtUtils/typemap -typemap typemap nginx.xs > nginx.xsc && mv nginx.xsc nginx.c Please specify prototyping behavior for nginx.xs (see perlxs manual) gcc -c -I ../../../../../src/core -I ../../../../../src/event -I ../../../../../src/os/unix -I ../../../../../src/http -I ../../../../../src/http/modules -I ../../../../../src/http/modules/perl -I ../../../../../objs -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -I/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE -g -O -DVERSION=\"0.7.60\" -DXS_VERSION=\"0.7.60\" -fPIC "-I/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE" nginx.c In file included from ../../../../../src/core/ngx_core.h:70, from nginx.xs:10: ../../../../../src/event/ngx_event_openssl.h:14:25: error: openssl/ssl.h: No such file or directory ../../../../../src/event/ngx_event_openssl.h:15:25: error: openssl/err.h: No such file or directory In file included from ../../../../../src/core/ngx_core.h:70, from nginx.xs:10: ../../../../../src/event/ngx_event_openssl.h:31: error: expected specifier-qualifier-list before 鈥楽SL_CTX鈥? ../../../../../src/event/ngx_event_openssl.h:37: error: expected specifier-qualifier-list before 鈥楽SL鈥? ../../../../../src/event/ngx_event_openssl.h:110: error: expected 鈥?鈥?before 鈥?鈥?token ../../../../../src/event/ngx_event_openssl.h:111: error: expected declaration specifiers or 鈥?..鈥?before 鈥楽SL_SESSION鈥? In file included from ../../../../../src/http/ngx_http.h:30, from nginx.xs:11: ../../../../../src/http/ngx_http_upstream_round_robin.h:33: error: expected specifier-qualifier-list before 鈥楽SL_SESSION鈥? make[2]: *** Error 1 make[2]: Leaving directory `/home/elove/nginx-0.7.60/objs/src/http/modules/perl’ make[1]: \*\*\* Error 2 make[1]: Leaving directory `/home/elove/nginx-0.7.60’ make: \*\*\* Error 2 Posted at Nginx Forum: > **[nginx-0.7.60 make error, when --with-http\_perl\_module](https://forum.nginx.org/read.php?2,3276,3276#msg-3276)** > > \[code\] #./configure --user=elove --group=elove --prefix=/home/elove/app/nginx --with-http\_stub\_status\_module --with-http\_ssl\_module --with-openssl=/home/elove/openssl-0.9.8c --with-http\_perl\_module --with-perl=/usr/bin/perl... ---
**Author:** ![lankelan](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/l/c37758/32.png) [@lankelan](https://www.ruby-forum.com/u/lankelan)\ **Post date:** [June 23, 2009, 5:16pm UTC](https://www.ruby-forum.com/t/nginx-make-error-when-with-http-perl-module/170833/2 "2009-06-23T17:16:31Z")
How to solve this error? Posted at Nginx Forum: > **[Re: nginx-0.7.60 make error, when --with-http\_perl\_module](https://forum.nginx.org/read.php?2,3276,3298#msg-3298)** > > \[code\] #./configure --user=elove --group=elove --prefix=/home/elove/app/nginx --with-http\_stub\_status\_module --with-http\_ssl\_module --with-openssl=/home/elove/openssl-0.9.8c --with-http\_perl\_module --with-perl=/usr/bin/perl... ---
**Author:** ![lankelan](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/l/c37758/32.png) [@lankelan](https://www.ruby-forum.com/u/lankelan)\ **Post date:** [June 23, 2009, 7:36pm UTC](https://www.ruby-forum.com/t/nginx-make-error-when-with-http-perl-module/170833/3 "2009-06-23T19:36:46Z")
On Tue, Jun 23, 2009 at 10:09 PM, lankelan[removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) wrote: > How to solve this error? > > Posted at Nginx Forum: [Re: nginx-0.7.60 make error, when --with-http\_perl\_module](http://forum.nginx.org/read.php?2,3276,3298#msg-3298) log please? ---
**Author:** ![lankelan](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/l/c37758/32.png) [@lankelan](https://www.ruby-forum.com/u/lankelan)\ **Post date:** [June 24, 2009, 12:38pm UTC](https://www.ruby-forum.com/t/nginx-make-error-when-with-http-perl-module/170833/4 "2009-06-24T12:38:34Z")
thans Maxim D., I resolved. move nginx.pm into nginxpath/modules/perl/ Posted at Nginx Forum: > **[Re: nginx-0.7.60 make error, when --with-http\_perl\_module](https://forum.nginx.org/read.php?2,3276,3323#msg-3323)** > > \[code\] #./configure --user=elove --group=elove --prefix=/home/elove/app/nginx --with-http\_stub\_status\_module --with-http\_ssl\_module --with-openssl=/home/elove/openssl-0.9.8c --with-http\_perl\_module --with-perl=/usr/bin/perl... ---
**Author:** ![lankelan](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/l/c37758/32.png) [@lankelan](https://www.ruby-forum.com/u/lankelan)\ **Post date:** [June 24, 2009, 2:11am UTC](https://www.ruby-forum.com/t/nginx-make-error-when-with-http-perl-module/170833/5 "2009-06-24T02:11:54Z")
Hello! On Tue, Jun 23, 2009 at 03:24:20AM -0400, lankelan wrote: > #./configure --user=elove --group=elove --prefix=/home/elove/app/nginx --with-http\_stub\_status\_module --with-http\_ssl\_module --with-openssl=/home/elove/openssl-0.9.8c --with-http\_perl\_module --with-perl=/usr/bin/perl --with-perl\_modules\_path=/home/elove/app/nginx/modules/perl/ […] > …/…/…/…/…/src/event/ngx\_event\_openssl.h:111: error: expected declaration specifiers or 鈥?..鈥?before 鈥楽SL\_SESSION鈥? > In file included from …/…/…/…/…/src/http/ngx\_http.h:30, > from nginx.xs:11: > …/…/…/…/…/src/http/ngx\_http\_upstream\_round\_robin.h:33: error: expected specifier-qualifier-list before 鈥楽SL\_SESSION鈥? > make[2]: \*\*\* Error 1 > make[2]: Leaving directory `/home/elove/nginx-0.7.60/objs/src/http/modules/perl' make[1]: *** Error 2 make[1]: Leaving directory`/home/elove/nginx-0.7.60’ > make: \*\*\* Error 2 Try the attached patch. Maxim D. ---
**Author:** ![lankelan](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/l/c37758/32.png) [@lankelan](https://www.ruby-forum.com/u/lankelan)\ **Post date:** [June 24, 2009, 1:12pm UTC](https://www.ruby-forum.com/t/nginx-make-error-when-with-http-perl-module/170833/6 "2009-06-24T13:12:00Z")
Hello! On Wed, Jun 24, 2009 at 06:26:54AM -0400, lankelan wrote: > thans Maxim D., I resolved. > > move nginx.pm into nginxpath/modules/perl/ Actually, it should be in …/perl//nginx.pm. It looks like your perl somewhat screwed up and doesn’t catch this automatically as it should. Maxim D. ---
**Author:** ![lankelan](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/l/c37758/32.png) [@lankelan](https://www.ruby-forum.com/u/lankelan)\ **Post date:** [June 24, 2009, 10:04pm UTC](https://www.ruby-forum.com/t/nginx-make-error-when-with-http-perl-module/170833/7 "2009-06-24T22:04:28Z")
Thanks Maxim D. I attached patch and make success. When start nginx print this error. Can’t locate nginx.pm in @INC (@INC contains: /home/elove/app/nginx/modules/perl /usr/lib/perl5/site\_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site\_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site\_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site\_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site\_perl/5.8.8 /usr/lib/perl5/site\_perl/5.8.7 /usr/lib/perl5/site\_perl/5.8.6 /usr/lib/perl5/site\_perl/5.8.5 /usr/lib/perl5/site\_perl /usr/lib/perl5/vendor\_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor\_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor\_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor\_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor\_perl/5.8.8 /usr/lib/perl5/vendor\_perl/5.8.7 /usr/lib/perl5/vendor\_perl/5.8.6 /usr/lib/perl5/vendor\_perl/5.8.5 /usr/lib/perl5/vendor\_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .). BEGIN failed–compilation aborted. : perl\_parse() failed: 2 Posted at Nginx Forum: > **[Re: nginx make error, when --with-http\_perl\_module](https://forum.nginx.org/read.php?2,3276,3311#msg-3311)** > > \[code\] #./configure --user=elove --group=elove --prefix=/home/elove/app/nginx --with-http\_stub\_status\_module --with-http\_ssl\_module --with-openssl=/home/elove/openssl-0.9.8c --with-http\_perl\_module --with-perl=/usr/bin/perl... ---
**Author:** ![lankelan](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/l/c37758/32.png) [@lankelan](https://www.ruby-forum.com/u/lankelan)\ **Post date:** [June 24, 2009, 10:06pm UTC](https://www.ruby-forum.com/t/nginx-make-error-when-with-http-perl-module/170833/8 "2009-06-24T22:06:50Z")
nginx tree |-- client\_body\_temp |-- conf | |-- fastcgi\_params | |-- fastcgi\_params.default | |-- fcgi.conf | |-- koi-utf | |-- koi-win | |-- mime.types | |-- mime.types.default | |-- nginx.conf | |-- nginx.conf.default | `-- win-utf |-- fastcgi_temp |-- html | |-- 50x.html | `– index.html |-- logs | |-- access.log | |-- error.log |-- modules | `-- perl | |-- i386-linux-thread-multi | | |-- auto | | | `– nginx | | | |-- nginx.bs | | | `-- nginx.so | | |-- nginx.pm | | `– perllocal.pod | `-- man3 | `– nginx.3pm |-- proxy\_temp `-- sbin `– nginx Posted at Nginx Forum: > **[Re: nginx make error, when --with-http\_perl\_module](https://forum.nginx.org/read.php?2,3276,3313#msg-3313)** > > \[code\] #./configure --user=elove --group=elove --prefix=/home/elove/app/nginx --with-http\_stub\_status\_module --with-http\_ssl\_module --with-openssl=/home/elove/openssl-0.9.8c --with-http\_perl\_module --with-perl=/usr/bin/perl... ---
**Author:** ![lankelan](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/l/c37758/32.png) [@lankelan](https://www.ruby-forum.com/u/lankelan)\ **Post date:** [June 25, 2009, 4:06am UTC](https://www.ruby-forum.com/t/nginx-make-error-when-with-http-perl-module/170833/9 "2009-06-25T04:06:53Z")
Hello! On Tue, Jun 23, 2009 at 10:53:34PM -0400, lankelan wrote: > Thanks Maxim D. > > I attached patch and make success. > When start nginx print this error. > > Can’t locate nginx.pm in @INC (@INC contains: /home/elove/app/nginx/modules/perl /usr/lib/perl5/site\_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site\_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site\_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site\_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site\_perl/5.8.8 /usr/lib/perl5/site\_perl/5.8.7 /usr/lib/perl5/site\_perl/5.8.6 /usr/lib/perl5/site\_perl/5.8.5 /usr/lib/perl5/site\_perl /usr/lib/perl5/vendor\_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor\_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor\_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor\_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor\_perl/5.8.8 /usr/lib/perl5/vendor\_perl/5.8.7 /usr/lib/perl5/vendor\_perl/5.8.6 /usr/lib/perl5/vendor\_perl/5.8.5 /usr/lib/perl5/vendor\_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .). > BEGIN failed–compilation aborted. > : perl\_parse() failed: 2 Looks like you haven’t run ‘make install’ and therefore there is no nginx.pm in that perl can found. After ‘make install’ it should appear in /home/elove/app/nginx/modules/perl. Maxim D. ---
**Author:** ![lankelan](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/l/c37758/32.png) [@lankelan](https://www.ruby-forum.com/u/lankelan)\ **Post date:** [October 8, 2009, 7:54pm UTC](https://www.ruby-forum.com/t/nginx-make-error-when-with-http-perl-module/170833/10 "2009-10-08T19:54:20Z")
Hello, how patch file plz ? tsukasa. Posted at Nginx Forum: > **[Re: nginx-0.7.60 make error, when --with-http\_perl\_module](https://forum.nginx.org/read.php?2,3276,12120#msg-12120)** > > \[code\] #./configure --user=elove --group=elove --prefix=/home/elove/app/nginx --with-http\_stub\_status\_module --with-http\_ssl\_module --with-openssl=/home/elove/openssl-0.9.8c --with-http\_perl\_module --with-perl=/usr/bin/perl... ---
**Author:** ![lankelan](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/l/c37758/32.png) [@lankelan](https://www.ruby-forum.com/u/lankelan)\ **Post date:** [October 8, 2009, 9:05pm UTC](https://www.ruby-forum.com/t/nginx-make-error-when-with-http-perl-module/170833/11 "2009-10-08T21:05:11Z")
Hello! On Thu, Oct 08, 2009 at 01:44:51PM -0400, tsukasagenesis wrote: > Hello, > > how patch file plz ? Sorry, unable to parse your question. If you aren’t able to find the patch in question, try looking more thoroughly. If you aren’t able to apply patch, try reading some docs about patch(1) program. E.g. you may try wikipedia article here: > **[patch (Unix)](https://en.wikipedia.org/wiki/Patch_(Unix))** > > The computer tool patch is a Unix program that updates text files according to instructions contained in a separate file, called a patch file. The patch file (also called a patch for short) is a text file that consists of a list of differences and is produced by running the related diff program with the original and updated file as arguments. Updating files with patch is often referred to as applying the patch or simply patching the files. > The original patch program was written by Larry Wall (wh... Maxim D. ---
**Author:** ![lankelan](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/l/c37758/32.png) [@lankelan](https://www.ruby-forum.com/u/lankelan)\ **Post date:** [September 23, 2010, 11:36am UTC](https://www.ruby-forum.com/t/nginx-make-error-when-with-http-perl-module/170833/12 "2010-09-23T11:36:55Z")
Hello! On Wed, Sep 22, 2010 at 10:29:57AM -0400, subeen wrote: > I am getting the same error (in centos54 nginx-0.7.67). I also tried the > patch, just edited the respective files by myself, but still getting the > error. > > This is the error message I am getting: > -I/usr/lib64/perl5/5.8.8/x86\_64-linux-thread-multi/CORE -g -O > -DVERSION="0.7.67" -DXS\_VERSION="0.7.67" -fPIC > “-I/usr/lib64/perl5/5.8.8/x86\_64-linux-thread-multi/CORE” nginx.c […] In 0.7.67 you have to use updated patch, see here: [http://nginx.org/pipermail/nginx-devel/2010-January/000103.html](http://nginx.org/pipermail/nginx-devel/2010-January/000103.html) [http://nginx.org/pipermail/nginx-devel/2010-January/000104.html](http://nginx.org/pipermail/nginx-devel/2010-January/000104.html) Maxim D. ---
**Author:** ![lankelan](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/l/c37758/32.png) [@lankelan](https://www.ruby-forum.com/u/lankelan)\ **Post date:** [September 23, 2010, 9:33am UTC](https://www.ruby-forum.com/t/nginx-make-error-when-with-http-perl-module/170833/13 "2010-09-23T09:33:22Z")
I am getting the same error (in centos54 nginx-0.7.67). I also tried the patch, just edited the respective files by myself, but still getting the error. This is the error message I am getting: ```auto make[2]: Entering directory `/root/nginx-0.7.67/objs/src/http/modules/perl' gcc -c -I ../../../../../src/core -I ../../../../../src/event -I ../../../../../src/os/unix -I ../../../../../src/http -I ../../../../../src/http/modules -I ../../../../../src/http/modules/perl -I ../../../../../objs -I /root/pcre-8.10 -I ../../../../..//openssl/include -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -I/usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi/CORE -g -O -DVERSION=\"0.7.67\" -DXS_VERSION=\"0.7.67\" -fPIC "-I/usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi/CORE" nginx.c In file included from ../../../../../src/core/ngx_core.h:70, from nginx.xs:10: ../../../../../src/event/ngx_event_openssl.h:14:25: error: openssl/ssl.h: No such file or directory ../../../../../src/event/ngx_event_openssl.h:15:25: error: openssl/err.h: No such file or directory ../../../../../src/event/ngx_event_openssl.h:16:26: error: openssl/conf.h: No such file or directory ../../../../../src/event/ngx_event_openssl.h:17:28: error: openssl/engine.h: No such file or directory ../../../../../src/event/ngx_event_openssl.h:18:25: error: openssl/evp.h: No such file or directory In file included from ../../../../../src/core/ngx_core.h:70, from nginx.xs:10: ../../../../../src/event/ngx_event_openssl.h:28: error: expected specifier-qualifier-list before ‘SSL_CTX’ ../../../../../src/event/ngx_event_openssl.h:34: error: expected specifier-qualifier-list before ‘SSL’ ../../../../../src/event/ngx_event_openssl.h:109: error: expected ‘)’ before ‘*’ token ../../../../../src/event/ngx_event_openssl.h:110: error: expected declaration specifiers or ‘...’ before ‘SSL_SESSION’ In file included from ../../../../../src/http/ngx_http.h:30, from nginx.xs:11: ../../../../../src/http/ngx_http_upstream_round_robin.h:33: error: expected specifier-qualifier-list before ‘SSL_SESSION’ make[2]: *** [nginx.o] Error 1 make[2]: Leaving directory `/root/nginx-0.7.67/objs/src/http/modules/perl' make[1]: *** [objs/src/http/modules/perl/blib/arch/auto/nginx/nginx.so] Error 2 make[1]: Leaving directory `/root/nginx-0.7.67' make: *** [build] Error 2 ``` Posted at Nginx Forum: > **[Re: nginx make error, when --with-http\_perl\_module](https://forum.nginx.org/read.php?2,3276,132852#msg-132852)** > > \[code\] #./configure --user=elove --group=elove --prefix=/home/elove/app/nginx --with-http\_stub\_status\_module --with-http\_ssl\_module --with-openssl=/home/elove/openssl-0.9.8c --with-http\_perl\_module --with-perl=/usr/bin/perl...