# Mongrel issue

**URL:** <https://www.ruby-forum.com/t/mongrel-issue/172179>\
**Category:** Rails\
**Created:** [July 16, 2009, 10:49am UTC](https://www.ruby-forum.com/t/mongrel-issue/172179 "2009-07-16T10:49:44Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![santoshturamari](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/ee59a6/32.png) [@santoshturamari](https://www.ruby-forum.com/u/santoshturamari)\
**Post date:** [July 16, 2009, 10:49am UTC](https://www.ruby-forum.com/t/mongrel-issue/172179/1 "2009-07-16T10:49:44Z")

</div>

Hello G.s,

```
As our pids are getting lost again and again, we need to restart

```

mongrel\_cluster again and again, I have one doubt that , for this we may  
need to configure mongrel\_cluster.yml, but I can find in that for the  
port 3000, and we are checking the status, start and stop as

mongrel\_rails cluster::restart -C /etc/mongrel\_cluster/t11.conf which  
does for port 8000.

and if we do mongrel\_rails cluster::restart , it does for port 3000

so in /etc/mongrel\_cluster/t11.conf we have for port 8000. So do we  
need to reconfigure mongrel\_cluster.yml ? Please help.

---

<div class="post-metadata">

**Author:** ![santoshturamari](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/ee59a6/32.png) [@santoshturamari](https://www.ruby-forum.com/u/santoshturamari)\
**Post date:** [July 16, 2009, 4:55pm UTC](https://www.ruby-forum.com/t/mongrel-issue/172179/2 "2009-07-16T16:55:15Z")

</div>

Hi Santosh,

On Thu, 2009-07-16 at 10:49 +0200, Santosh T. wrote:

> and if we do mongrel\_rails cluster::restart , it does for port 3000
> 
> so in /etc/mongrel\_cluster/t11.conf we have for port 8000. So do we  
> need to reconfigure mongrel\_cluster.yml ? Please help.

You’ll have a much better chance of getting the help you’re looking for  
on the rails-deploy list. It’s a very helpful group of folks who live  
and breath this stuff.

HTH,  
Bill