# LTE Receiver project

**URL:** <https://www.ruby-forum.com/t/lte-receiver-project/224794>\
**Category:** GNU Radio\
**Created:** [November 26, 2012, 5:43pm UTC](https://www.ruby-forum.com/t/lte-receiver-project/224794 "2012-11-26T17:43:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![aris](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/a/258eb7/32.png) [@aris](https://www.ruby-forum.com/u/aris)\
**Post date:** [November 26, 2012, 5:43pm UTC](https://www.ruby-forum.com/t/lte-receiver-project/224794/1 "2012-11-26T17:43:11Z")

</div>

Hello GNURadio enthusiasts,

during the last months I have been working on my LTE Receiver project as  
part of my bachelor thesis.

Its design goal was to keep to the GNU Radio flowgraph structure and  
therefore to achieve high modularity. Currently supported features are  
synchronization, an LTE OFDM estimator and the blocks for decoding of  
the LTE PBCH, BCH and MIB. And I am still working on this project to  
develop it further.

The source code can be found on GitHub

> **[GitHub - kit-cel/gr-lte: GNU Radio LTE receiver](https://github.com/kit-cel/gr-lte)**
>
> GNU Radio LTE receiver. Contribute to kit-cel/gr-lte development by creating an account on GitHub.

Comments etc. are highly welcome. So have look!

Best regards  
Johannes D.

---

<div class="post-metadata">

**Author:** ![jdejong](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/a9a28c/32.png) [@jdejong](https://www.ruby-forum.com/u/jdejong)\
**Post date:** [July 5, 2013, 3:21am UTC](https://www.ruby-forum.com/t/lte-receiver-project/224794/2 "2013-07-05T03:21:29Z")

</div>

Dear Demel：  
I have started some LTE phy work. My long term plan is to develop it  
using GNU radio.However, I have not found suitable code for LTE phy  
layer on GNU Radio .  
Fortunately，I find your code named  
gr-lte([GitHub - kit-cel/gr-lte: GNU Radio LTE receiver](https://github.com/kit-cel/gr-lte)).But we are just the  
tiros.Would you please give me more information about your code gr-lte  
such as how to Compile and run the code.And if we want to comply the  
code in two usrps ,how can we make it.  
Thank you for your help.

Wood