# Limit\_rate\_after

**URL:** <https://www.ruby-forum.com/t/limit-rate-after/168948>\
**Category:** NGINX\
**Created:** [May 27, 2009, 5:06pm UTC](https://www.ruby-forum.com/t/limit-rate-after/168948 "2009-05-27T17:06:55Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![imixaly4](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/i/3ab097/32.png) [@imixaly4](https://www.ruby-forum.com/u/imixaly4)\
**Post date:** [May 27, 2009, 5:06pm UTC](https://www.ruby-forum.com/t/limit-rate-after/168948/1 "2009-05-27T17:06:55Z")

</div>

Patch creates limit\_rate\_after directive:

limit\_rate\_after 1m;  
limit\_rate 100k;

The directive limits speed only after the first part was sent.

---

<div class="post-metadata">

**Author:** ![imixaly4](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/i/3ab097/32.png) [@imixaly4](https://www.ruby-forum.com/u/imixaly4)\
**Post date:** [May 28, 2009, 12:59pm UTC](https://www.ruby-forum.com/t/limit-rate-after/168948/2 "2009-05-28T12:59:10Z")

</div>

On Wed, May 27, 2009 at 06:50:44PM +0400, Igor S. wrote:

> Patch creates limit\_rate\_after directive:
> 
> limit\_rate\_after 1m;  
> limit\_rate 100k;
> 
> The directive limits speed only after the first part was sent.

The renewed patch.

---

<div class="post-metadata">

**Author:** ![imixaly4](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/i/3ab097/32.png) [@imixaly4](https://www.ruby-forum.com/u/imixaly4)\
**Post date:** [May 30, 2009, 3:43pm UTC](https://www.ruby-forum.com/t/limit-rate-after/168948/3 "2009-05-30T15:43:45Z")

</div>

Hello.

Thanks for this patch, working great for me 🙂

Best Regards  
Grzegorz S.

2009/5/28 Igor S. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid):

---

<div class="post-metadata">

**Author:** ![imixaly4](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/i/3ab097/32.png) [@imixaly4](https://www.ruby-forum.com/u/imixaly4)\
**Post date:** [October 23, 2012, 5:42pm UTC](https://www.ruby-forum.com/t/limit-rate-after/168948/4 "2012-10-23T17:42:55Z")

</div>

Igor S. wrote in post #820789:

> On Wed, May 27, 2009 at 06:50:44PM +0400, Igor S. wrote:
> 
> > Patch creates limit\_rate\_after directive:
> > 
> > limit\_rate\_after 1m;  
> > limit\_rate 100k;
> > 
> > The directive limits speed only after the first part was sent.
> 
> The renewed patch.

Any chance for a new patch here to shape the burst as well?

I want first 1m to go with 500k and the remaining with 100k…

Thank you