# Learning sources

**URL:** <https://www.ruby-forum.com/t/learning-sources/117797>\
**Category:** wxRuby\
**Created:** [October 20, 2007, 1:11pm UTC](https://www.ruby-forum.com/t/learning-sources/117797 "2007-10-20T13:11:41Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![webdr](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/w/58f4c7/32.png) [@webdr](https://www.ruby-forum.com/u/webdr)\
**Post date:** [October 20, 2007, 1:11pm UTC](https://www.ruby-forum.com/t/learning-sources/117797/1 "2007-10-20T13:11:41Z")

</div>

When i decide to create a GUI for my desktop “Ruby” application, i have  
been stucked about wxruby.

Then i have looked at wxwindows and wxwidgets sources but the syntax was  
not so familiar to me. Because the examples were written in C++  
generally.  
For understanding main concept this experience was good for me.

Later, for more familiar syntax i have looked at wxphyton sources and i  
read many informations but it was not ruby at the end.

Do you suggest me any other sources for wxruby except examples which  
come with gem installation?

---

<div class="post-metadata">

**Author:** ![webdr](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/w/58f4c7/32.png) [@webdr](https://www.ruby-forum.com/u/webdr)\
**Post date:** [October 20, 2007, 9:09pm UTC](https://www.ruby-forum.com/t/learning-sources/117797/2 "2007-10-20T21:09:01Z")

</div>

Actually I’m looking wxPython and learning from wxPython in action,  
I believe that if you following the book, the syntax wouldn’t be too  
much  
a problem, it is quite understandable. Anyway, I’m learning from the  
book  
and the wxPython/wxRuby example. (the wxWidget in C++ is far from  
me too, so I chose python). Good luck.

On 10/20/07, Umut Y. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) wrote:

> ## Do you suggest me any other sources for wxruby except examples which come with gem installation?
> 
> Posted via [http://www.ruby-forum.com/](http://www.ruby-forum.com/).
> 
> * * *
> 
> wxruby-users mailing list  
> removed\_email\_address@domain.invalid  
> [http://rubyforge.org/mailman/listinfo/wxruby-users](http://rubyforge.org/mailman/listinfo/wxruby-users)

–  
Best Regards  
XRuby [http://xruby.com](http://xruby.com)  
femto [http://hi.baidu.com/femto](http://hi.baidu.com/femto)

---

<div class="post-metadata">

**Author:** ![webdr](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/w/58f4c7/32.png) [@webdr](https://www.ruby-forum.com/u/webdr)\
**Post date:** [October 20, 2007, 11:27pm UTC](https://www.ruby-forum.com/t/learning-sources/117797/3 "2007-10-20T23:27:39Z")

</div>

Hello Umut,

There’s not much in “current” examples, or Tutorials, to help people  
along with their development of wxRuby. But, you can also ask on here,  
about a certain way a control is created, or used. You’ll find that a  
lot of us will be happy to send you example code to implement what you  
are trying to do, so that you can see how it’s done. Always feel free to  
ask about some code here, to implement what you are trying to do. 😉

Mario S.

---

<div class="post-metadata">

**Author:** ![webdr](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/w/58f4c7/32.png) [@webdr](https://www.ruby-forum.com/u/webdr)\
**Post date:** [October 22, 2007, 11:07am UTC](https://www.ruby-forum.com/t/learning-sources/117797/4 "2007-10-22T11:07:31Z")

</div>

Umut Y. wrote:

> When i decide to create a GUI for my desktop “Ruby” application, i have  
> been stucked about wxruby.
> 
> Then i have looked at wxwindows and wxwidgets sources but the syntax was  
> not so familiar to me. Because the examples were written in C++  
> generally.  
> I agree that the C++ code samples have a lot of language “noise” that  
> makes it hard to translate to Ruby; wxPython is probably a better  
> learning source.

Aside from the samples and the wiki tutorials, you might have a look at  
the code of some real life wxRuby applications:  
[http://wxruby.rubyforge.org/wiki/wiki.pl?OnlineCodeExamples](http://wxruby.rubyforge.org/wiki/wiki.pl?OnlineCodeExamples)

Weft QDA, for example, is a database-based application with multiple  
windows, dialogs and controls; it deals with structuring a larger  
application.

As Mario says, questions about using the library are very welcome on  
this list. wxRuby’s such a big API that everyone often ends learning  
something from them, even if they seem simple.

Lastly, we will be looking to add more tutorials and examples; it’s only  
really in the last six months or so that some core technical problems  
have been resolved in the library, and the API firmed up - that’s been  
occupying most of the time of the core dev team.

cheers  
alex
