# Implementation of ieee 802-11 transeiver

**URL:** <https://www.ruby-forum.com/t/implementation-of-ieee-802-11-transeiver/241048>\
**Category:** GNU Radio\
**Created:** [May 10, 2014, 8:38pm UTC](https://www.ruby-forum.com/t/implementation-of-ieee-802-11-transeiver/241048 "2014-05-10T20:38:54Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![musicdenotation](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/ea666f/32.png) [@musicdenotation](https://www.ruby-forum.com/u/musicdenotation)\
**Post date:** [May 10, 2014, 8:38pm UTC](https://www.ruby-forum.com/t/implementation-of-ieee-802-11-transeiver/241048/1 "2014-05-10T20:38:54Z")

</div>

Hi,

I would like to implement a transceiver in USRP E 110 with gnuradio.

For that I found a code concerning an implementation of ieee 802-11 of a  
transeiver with USRP N 210 descibed in this  
[GitHub - bastibl/gr-ieee802-11: IEEE 802.11 a/g/p Transceiver](https://github.com/bastibl/gr-ieee802-11).  
To implement it I followed the script “read me” mentionned in this link  
[GitHub - bastibl/gr-ieee802-11: IEEE 802.11 a/g/p Transceiver](https://github.com/bastibl/gr-ieee802-11).

But when I arrive to the step IT++, when I typed sudo port install itpp

it shows me :

wafa@wafa-K46CB:~$ sudo port install itpp  
sudo: port: command not found

plz how to deal with this error.

Best regards,

Wafa

---

<div class="post-metadata">

**Author:** ![wafa\_e](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/w/b4bc9f/32.png) [@wafa\_e](https://www.ruby-forum.com/u/wafa_e)\
**Post date:** [May 10, 2014, 9:40pm UTC](https://www.ruby-forum.com/t/implementation-of-ieee-802-11-transeiver/241048/2 "2014-05-10T21:40:20Z")

</div>

I tested sudo apt-get install libitpp-dev and it works

2014-05-10 20:37 GMT+02:00 Wafa E. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid):