# GNURadio or Labview interface to USRP N210/N200

**URL:** <https://www.ruby-forum.com/t/gnuradio-or-labview-interface-to-usrp-n210-n200/232396>\
**Category:** GNU Radio\
**Created:** [October 7, 2014, 3:27pm UTC](https://www.ruby-forum.com/t/gnuradio-or-labview-interface-to-usrp-n210-n200/232396 "2014-10-07T15:27:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![addis\_a](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/a/c4cdca/32.png) [@addis\_a](https://www.ruby-forum.com/u/addis_a)\
**Post date:** [October 7, 2014, 3:27pm UTC](https://www.ruby-forum.com/t/gnuradio-or-labview-interface-to-usrp-n210-n200/232396/1 "2014-10-07T15:27:18Z")

</div>

Hello All,

I have Ettus R. N210 and N200. I have been running GNURadio on  
USRP.  
I wanted to experiment with LabView. I have two questions,

1. Is it possible to run the firmware given by NI in the below link on  
N210  
or N200

> **[NI-USRP Download](https://www.ni.com/en-us/support/downloads/drivers/download.ni-usrp.html)**
>
> Download NI-USRP and find support information. You can use this download page to access NI-USRP and all available editions are available from this download page.

1. If the above is possible, would I be able to flash the UHD firmware  
back  
on the USRPN210/N200?

Thanks,

Sagar

---

<div class="post-metadata">

**Author:** ![Sagar\_Simha](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/e5b9ba/32.png) [@Sagar\_Simha](https://www.ruby-forum.com/u/Sagar_Simha)\
**Post date:** [October 7, 2014, 3:46pm UTC](https://www.ruby-forum.com/t/gnuradio-or-labview-interface-to-usrp-n210-n200/232396/2 "2014-10-07T15:46:35Z")

</div>

For LabView questions, you probably want the usrp-users mailing list.

Gist of it: You can flash firmwares back and forth, but you might not  
even need to change the firmware depending on which version you’re  
running. Give it a try, you can’t break anything.

M