# Gnuradio installation on ubuntu 9.04

**URL:** <https://www.ruby-forum.com/t/gnuradio-installation-on-ubuntu-9-04/185902>\
**Category:** GNU Radio\
**Created:** [March 29, 2010, 12:03am UTC](https://www.ruby-forum.com/t/gnuradio-installation-on-ubuntu-9-04/185902 "2010-03-29T00:03:33Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Merve\_D](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/e95f7d/32.png) [@Merve\_D](https://www.ruby-forum.com/u/Merve_D)\
**Post date:** [March 29, 2010, 12:03am UTC](https://www.ruby-forum.com/t/gnuradio-installation-on-ubuntu-9-04/185902/1 "2010-03-29T00:03:33Z")

</div>

Hi Everbody,  
I tried to setup gnuradio on ubuntu 9.04. When i write "./configure  
–with-boost=$BOOST\_PREFIX # As per the instructions for installing  
Boost " command on terminal some error occurs…

make[4]: \*\*\* [gnuradio-config-info] Error 1  
make[4]: Leaving directory `/home/merve/gnuradio/gnuradio-core/src/lib' make[3]: *** [check-recursive] Error 1 make[3]: Leaving directory`/home/merve/gnuradio/gnuradio-core/src/lib’  
make[2]: \*\*\* [check-recursive] Error 1  
make[2]: Leaving directory `/home/merve/gnuradio/gnuradio-core/src' make[1]: *** [check-recursive] Error 1 make[1]: Leaving directory`/home/merve/gnuradio/gnuradio-core’  
make: \*\*\* [check-recursive] Error 1

Is there anybody know how can i can figure out this problem?

Merve…

---

<div class="post-metadata">

**Author:** ![Merve\_D](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/e95f7d/32.png) [@Merve\_D](https://www.ruby-forum.com/u/Merve_D)\
**Post date:** [March 29, 2010, 12:14am UTC](https://www.ruby-forum.com/t/gnuradio-installation-on-ubuntu-9-04/185902/2 "2010-03-29T00:14:04Z")

</div>

On 03/28/2010 05:59 PM, Merve D. wrote:

> make[1]: Leaving directory `/home/merve/gnuradio/gnuradio-core’  
> make: \*\*\* [check-recursive] Error 1
> 
> Is there anybody know how can i can figure out this problem?

We need to see more of the messages.

Philip

---

<div class="post-metadata">

**Author:** ![Merve\_D](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/e95f7d/32.png) [@Merve\_D](https://www.ruby-forum.com/u/Merve_D)\
**Post date:** [March 29, 2010, 12:17am UTC](https://www.ruby-forum.com/t/gnuradio-installation-on-ubuntu-9-04/185902/3 "2010-03-29T00:17:00Z")

</div>

Hi Merve,

If you have followed the instructions at  
[http://gnuradio.org/redmine/wiki/1/UbuntuInstall](http://gnuradio.org/redmine/wiki/1/UbuntuInstall)

- Jaunty (9.04): _**Package sdcc-nf needs to be installed (instead of  
sdcc)**_

sudo apt-get -y install swig g++ automake1.9 libtool python-dev  
fftw3-dev   
libcppunit-dev libboost1.35-dev sdcc-nf libusb-dev   
libsdl1.2-dev python-wxgtk2.8 subversion git guile-1.8-dev   
libqt4-dev python-numpy ccache python-opengl libgsl0-dev   
python-cheetah python-lxml doxygen qt4-dev-tools   
libqwt5-qt4-dev libqwtplot3d-qt4-dev pyqt4-dev-tools

…then all you need to do is:

./bootstrap  
./configure  
make  
make check  
sudo make install

cheers,

mike