# Gnuradio 3.7 0rc0 uhd disable

**URL:** <https://www.ruby-forum.com/t/gnuradio-3-7-0rc0-uhd-disable/235455>\
**Category:** GNU Radio\
**Created:** [June 22, 2013, 11:03am UTC](https://www.ruby-forum.com/t/gnuradio-3-7-0rc0-uhd-disable/235455 "2013-06-22T11:03:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![alcina](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/a/a587f6/32.png) [@alcina](https://www.ruby-forum.com/u/alcina)\
**Post date:** [June 22, 2013, 11:03am UTC](https://www.ruby-forum.com/t/gnuradio-3-7-0rc0-uhd-disable/235455/1 "2013-06-22T11:03:29Z")

</div>

Dear  
all,  
i have compiled the the new version of gnuradio 3.7 . while making cmake  
disable uhd in grc i have tried  
cmake -DENABLE\_BAD\_BOOST=ON -DENABLE\_DEFAULT=OFF …/

## but don’t have effect on disable block, i know the boost 146 is bad boost inspite of disabling there is no effect on blocked elements. i have the following installation on PC linux; GNU C++ version 4.6.3; Boost\_104601; UHD\_003.005.003-0-unknown – ###################################################### – # Gnuradio enabled components – ###################################################### – \* python-support – \* testing-support – \* volk – \* doxygen – \* sphinx – \* gnuradio-runtime – \* gr-blocks – \* gnuradio-companion – \* gr-fec – \* gr-fft – \* gr-filter – \* gr-analog – \* gr-digital – \* gr-atsc – \* gr-audio – \* gr-channels – \* gr-noaa – \* gr-pager – \* gr-qtgui – \* gr-trellis – \* gr-utils – \* gr-video-sdl – \* gr-vocoder – \* gr-fcd – \* gr-wavelet – \* gr-wxgui

## – ###################################################### – # Gnuradio disabled components – ###################################################### – \* gr-ctrlport – \* gr-comedi – \* gr-uhd

– Using install prefix: /usr/local  
– Building for version: 3.7.0rc0 / 3.7.0rc0  
– Configuring done  
– Generating done

Dose anyone face this in new GNURadio 3.7???

Thanks  
Junaid

---

<div class="post-metadata">

**Author:** ![Muhammad\_JUNAID](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/8dc957/32.png) [@Muhammad\_JUNAID](https://www.ruby-forum.com/u/Muhammad_JUNAID)\
**Post date:** [June 22, 2013, 9:23pm UTC](https://www.ruby-forum.com/t/gnuradio-3-7-0rc0-uhd-disable/235455/2 "2013-06-22T21:23:58Z")

</div>

On Sat, Jun 22, 2013 at 4:57 AM, Muhammad JUNAID  
[removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) wrote:

> ## – ###################################################### – \* gr-filter – \* gr-video-sdl – \* gr-uhd
> 
> – Using install prefix: /usr/local  
> – Building for version: 3.7.0rc0 / 3.7.0rc0  
> – Configuring done  
> – Generating done
> 
> Dose anyone face this in new GNURadio 3.7???
> 
> Thanks  
> Junaid

Junaid,

You really don’t need /everything/ to build in GNU Radio. Just make  
sure that the components you plan on using are listed in the enabled  
section. Are you going to use ControlPort? If not, no reason to worry  
if gr-ctrlport is disabled. Do you have a USRP? If no, then you don’t  
need gr-uhd. Etc., etc.

These also have nothing to do with Boost. If this was an issue with  
Boost, then nothing would be enabled.

For gr-ctrlport, you need to install zeroc-ice.

For gr-uhd, you need to install libuhd.

For gr-comedi, you need to install libcomedi-dev.

Tom