# GNU Radio Installation

**URL:** <https://www.ruby-forum.com/t/gnu-radio-installation/242122>\
**Category:** GNU Radio\
**Created:** [May 29, 2015, 1:32am UTC](https://www.ruby-forum.com/t/gnu-radio-installation/242122 "2015-05-29T01:32:16Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Detlef\_R](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/d/58f4c7/32.png) [@Detlef\_R](https://www.ruby-forum.com/u/Detlef_R)\
**Post date:** [May 29, 2015, 1:32am UTC](https://www.ruby-forum.com/t/gnu-radio-installation/242122/1 "2015-05-29T01:32:16Z")

</div>

I’m installing gnuradio again on my ubuntu 14.04 installed in VMware  
11.1.0. I tried it several times, but I can’t seem to pass this step:

Fetching various packages (Gnu Radio, UHD, gr-osmosdr, gr-iqbal, etc)  
via the Internet  
=======\> THIS MAY TAKE QUITE SOME TIME \<=========  
Fetching Gnu Radio via GIT…Cloning into ‘gnuradio’…

It’s been almost 12 hours and it’s not getting anywhere.

What should I change in my installation steps?

I am following this steps below:

1. mkdir ~/gnuradio
2. cd ~/gnuradio
3. wget [http://www.sbrac.org/files/build-gnuradio](http://www.sbrac.org/files/build-gnuradio)
4. chmod a+x build-gnuradio
5. ./build-gnuradio --verbose all

Thanks in advance.

\*Gerome Jan M. Llames \*  
Engineering Research and Development for Technology (ERDT) Scholar  
University of San Carlos - Technological Campus  
Nasipit Talamban, Cebu City, Philippines, 6000  
Mobile: +639271525124  
Email: removed\_email\_address@domain.invalid

---

<div class="post-metadata">

**Author:** ![Gerome\_Jan\_L](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/g/ee59a6/32.png) [@Gerome\_Jan\_L](https://www.ruby-forum.com/u/Gerome_Jan_L)\
**Post date:** [May 29, 2015, 1:35am UTC](https://www.ruby-forum.com/t/gnu-radio-installation/242122/2 "2015-05-29T01:35:12Z")

</div>

On 05/28/2015 07:31 PM, Gerome Jan L wrote:

> What should I change in my installation steps?

- 

My guess is that your institution blocks GIT, or you have some  
network-stack issue that’s preventing GIT from making forward progress  
in your VM.

-

---

<div class="post-metadata">

**Author:** ![Gerome\_Jan\_L](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/g/ee59a6/32.png) [@Gerome\_Jan\_L](https://www.ruby-forum.com/u/Gerome_Jan_L)\
**Post date:** [May 29, 2015, 1:50am UTC](https://www.ruby-forum.com/t/gnu-radio-installation/242122/3 "2015-05-29T01:50:58Z")

</div>

The fixes to Ubuntu installed IPV6 which basically kills the network  
opens. Disable it and reboot.

73,

Alan - W6ARH

From: discuss-gnuradio-bounces+alan.r.hill=removed\_email\_address@domain.invalid  
[[mailto:discuss-gnuradio-bounces+alan.r.hill=removed\_email\_address@domain.invalid](mailto:discuss-gnuradio-bounces+alan.r.hill=removed_email_address@domain.invalid)] On  
Behalf Of Gerome Jan L  
Sent: Thursday, May 28, 2015 4:31 PM  
To: removed\_email\_address@domain.invalid  
Subject: [Discuss-gnuradio] GNU Radio Installation

I’m installing gnuradio again on my ubuntu 14.04 installed in VMware  
11.1.0. I tried it several times, but I can’t seem to pass this step:

Fetching various packages (Gnu Radio, UHD, gr-osmosdr, gr-iqbal, etc)

via the Internet

=======\> THIS MAY TAKE QUITE SOME TIME \<=========

Fetching Gnu Radio via GIT…Cloning into ‘gnuradio’…

It’s been almost 12 hours and it’s not getting anywhere.

What should I change in my installation steps?

I am following this steps below:

1. mkdir ~/gnuradio

2. cd ~/gnuradio

3. wget [http://www.sbrac.org/files/build-gnuradio](http://www.sbrac.org/files/build-gnuradio)

4. chmod a+x build-gnuradio

5. ./build-gnuradio --verbose all

Thanks in advance.

Gerome Jan M. Llames

Engineering Research and Development for Technology (ERDT) Scholar

University of San Carlos - Technological Campus

Nasipit Talamban, Cebu City, Philippines, 6000

Mobile: +639271525124

Email: [mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) removed\_email\_address@domain.invalid

---

<div class="post-metadata">

**Author:** ![Gerome\_Jan\_L](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/g/ee59a6/32.png) [@Gerome\_Jan\_L](https://www.ruby-forum.com/u/Gerome_Jan_L)\
**Post date:** [May 29, 2015, 2:17am UTC](https://www.ruby-forum.com/t/gnu-radio-installation/242122/4 "2015-05-29T02:17:16Z")

</div>

Check the internet for suggestions on how to cure slow internet  
connections in Ubuntu. You do not have to be using it to have it  
active.

Alan

From: Gerome Jan L [[mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)]  
Sent: Thursday, May 28, 2015 5:10 PM  
To: Silverfox  
Cc: removed\_email\_address@domain.invalid  
Subject: Re: [Discuss-gnuradio] GNU Radio Installation

What do you mean IPv6? I’m using IPv4. Sorry, but I don’t quiet get your  
suggestion. Please elaborate. Thanks.

Gerome Jan M. Llames

Engineering Research and Development for Technology (ERDT) Scholar

University of San Carlos - Technological Campus

Nasipit Talamban, Cebu City, Philippines, 6000

Mobile: +639271525124

Email: [mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) removed\_email\_address@domain.invalid

On Fri, May 29, 2015 at 7:49 AM, Silverfox [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)  
wrote:

The fixes to Ubuntu installed IPV6 which basically kills the network  
opens. Disable it and reboot.

73,

Alan - W6ARH

From: discuss-gnuradio-bounces+alan.r.hill=removed\_email\_address@domain.invalid  
[mailto:discuss-gnuradio-bounces+alan.r.hill  
[mailto:discuss-gnuradio-bounces%2Balan.r.hill](mailto:discuss-gnuradio-bounces%2Balan.r.hill) =removed\_email\_address@domain.invalid] On  
Behalf Of Gerome Jan L  
Sent: Thursday, May 28, 2015 4:31 PM  
To: removed\_email\_address@domain.invalid  
Subject: [Discuss-gnuradio] GNU Radio Installation

I’m installing gnuradio again on my ubuntu 14.04 installed in VMware  
11.1.0. I tried it several times, but I can’t seem to pass this step:

Fetching various packages (Gnu Radio, UHD, gr-osmosdr, gr-iqbal, etc)

via the Internet

=======\> THIS MAY TAKE QUITE SOME TIME \<=========

Fetching Gnu Radio via GIT…Cloning into ‘gnuradio’…

It’s been almost 12 hours and it’s not getting anywhere.

What should I change in my installation steps?

I am following this steps below:

1. mkdir ~/gnuradio

2. cd ~/gnuradio

3. wget [http://www.sbrac.org/files/build-gnuradio](http://www.sbrac.org/files/build-gnuradio)

4. chmod a+x build-gnuradio

5. ./build-gnuradio --verbose all

Thanks in advance.

Gerome Jan M. Llames

Engineering Research and Development for Technology (ERDT) Scholar

University of San Carlos - Technological Campus

Nasipit Talamban, Cebu City, Philippines, 6000

Mobile: +639271525124 tel:%2B639271525124

Email: [mailto:removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) removed\_email\_address@domain.invalid

---

<div class="post-metadata">

**Author:** ![Gerome\_Jan\_L](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/g/ee59a6/32.png) [@Gerome\_Jan\_L](https://www.ruby-forum.com/u/Gerome_Jan_L)\
**Post date:** [May 29, 2015, 2:10am UTC](https://www.ruby-forum.com/t/gnu-radio-installation/242122/5 "2015-05-29T02:10:51Z")

</div>

What do you mean IPv6? I’m using IPv4. Sorry, but I don’t quiet get your  
suggestion. Please elaborate. Thanks.

\*Gerome Jan M. Llames \*  
Engineering Research and Development for Technology (ERDT) Scholar  
University of San Carlos - Technological Campus  
Nasipit Talamban, Cebu City, Philippines, 6000  
Mobile: +639271525124  
Email: removed\_email\_address@domain.invalid