# Fwd: USRP2 firmware images

**URL:** <https://www.ruby-forum.com/t/fwd-usrp2-firmware-images/238432>\
**Category:** GNU Radio\
**Created:** [January 9, 2014, 12:56pm UTC](https://www.ruby-forum.com/t/fwd-usrp2-firmware-images/238432 "2014-01-09T12:56:45Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Detlef\_R](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/d/58f4c7/32.png) [@Detlef\_R](https://www.ruby-forum.com/u/Detlef_R)\
**Post date:** [January 9, 2014, 12:56pm UTC](https://www.ruby-forum.com/t/fwd-usrp2-firmware-images/238432/1 "2014-01-09T12:56:45Z")

</div>

Hi everyone,

```
Well today i came across a problem with my USRP2. I'm suspecting it

```

could be a boot loader problem.

I searched for firmware images but couldn’t find any of the links to  
be  
working.Can someone send link for the firmware images.

Thanks and regards  
Sandhya.G  
Tenet Technetronics

---

<div class="post-metadata">

**Author:** ![sandhya\_g](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/s/47e85d/32.png) [@sandhya\_g](https://www.ruby-forum.com/u/sandhya_g)\
**Post date:** [January 9, 2014, 1:13pm UTC](https://www.ruby-forum.com/t/fwd-usrp2-firmware-images/238432/2 "2014-01-09T13:13:07Z")

</div>

On Thu, Jan 09, 2014 at 05:25:35PM +0530, Sandhya G wrote:

> Tenet Technetronics  
> Sandhya,

you can use the ‘uhd\_images\_downloader’ executable. If you’ve installed  
your UHD to a system location (e.g. /usr/local), you must run it with  
sudo privileges.

MB