# Fwd: gnuradio companion core dump **URL:** \ **Category:** GNU Radio\ **Created:** [August 4, 2014, 12:21pm UTC](https://www.ruby-forum.com/t/fwd-gnuradio-companion-core-dump/231348 "2014-08-04T12:21:40Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![addis\_a](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/a/c4cdca/32.png) [@addis\_a](https://www.ruby-forum.com/u/addis_a)\ **Post date:** [August 4, 2014, 12:21pm UTC](https://www.ruby-forum.com/t/fwd-gnuradio-companion-core-dump/231348/1 "2014-08-04T12:21:40Z")
Thanks, Martin. I ended up uninstalling Ice3.5 to disable CTRLPORT, then gnuradio make would fail. Ended up completely removing gnuradio and all components (using a gnuradio-remove script) then reinstalled (using the build-gnuradio script) and it’s back running (without CTRLPORT). Unfortunately am unable to reinstall Ice3.5 as the package manager throws an error (using the Trusty package from ZeroC, not the default built into Ubuntu). dpkg shows ~$ dpkg -l _ice3.5_ Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description ++±==============-============-============-================================= ii ice3.5-common 3.5.1-1 all Files common to all Ice packages ii libice3.5++ 3.5.1-1 amd64 The Ice run time for C++ ii libice3.5-cil 3.5.1-1 all The Ice run time for .NET (mono) ii libice3.5-java 3.5.1-1 all The Ice run time for Java ii libice3.5-php 3.5.1-1 amd64 The Ice run time for PHP ii libice3.5-pyth 3.5.1-1 amd64 The Ice run time for Python ii libice3.5-ruby 3.5.1-1 amd64 The Ice run time for Ruby So it _looks_ installed, but cmake of gnuradio reports it’s not found. If it’s of any use at this stage, here’s the dbg output captured from before all the Ice3.5 removal when it core dumped: (gdb) run Starting program: /usr/bin/python /usr/local/bin/gnuradio-companion [Thread debugging using libthread\_db enabled] Using host libthread\_db library “/lib/x86\_64-linux-gnu/libthread\_db.so.1”. [New Thread 0x7fffed478700 (LWP 4123)] [New Thread 0x7fffecc77700 (LWP 4124)] linux; GNU C++ version 4.8.1; Boost\_105300; UHD\_003.007.001-84-gd99ce4ef terminate called after throwing an instance of ‘std::runtime\_error’ what(): rpcmanager: Aggregator not in use, and a rpc booter is already registered Program received signal SIGABRT, Aborted. 0x00007ffff782cf79 in \_\_GI\_raise (sig=sig@entry=6) at …/nptl/sysdeps/unix/sysv/linux/raise.c:56 56 …/nptl/sysdeps/unix/sysv/linux/raise.c: No such file or directory. (gdb) bt #0 0x00007ffff782cf79 in \_\_GI\_raise (sig=sig@entry=6) at …/nptl/sysdeps/unix/sysv/linux/raise.c:56 #1 0x00007ffff7830388 in \_\_GI\_abort () at abort.c:89 #2 0x00007fffe63e16b5 in \_\_gnu\_cxx::\_\_verbose\_terminate\_handler() () from /usr/lib/x86\_64-linux-gnu/libstdc++.so.6 #3 0x00007fffe63df836 in ?? () from /usr/lib/x86\_64-linux-gnu/libstdc++.so.6 #4 0x00007fffe63df863 in std::terminate() () from /usr/lib/x86\_64-linux-gnu/libstdc++.so.6 #5 0x00007fffe63dfaa2 in \_\_cxa\_throw () from /usr/lib/x86\_64-linux-gnu/libstdc++.so.6 #6 0x00007fffcd031866 in rpcmanager::register\_booter (booter=) at /home/tom/gnuradio/gnuradio-runtime/lib/controlport/rpcmanager.cc:70 #7 0x00007ffff7dea13a in call\_init (l=, argc=argc@entry=2, argv=argv@entry=0x7fffffffdff8, env=env@entry=0x7fffffffe010) at dl-init.c:78 #8 0x00007ffff7dea223 in call\_init (env=, argv=, argc=, l=) at dl-init.c:36 #9 \_dl\_init (main\_map=main\_map@entry=0x2732c30, argc=2, argv=0x7fffffffdff8, env=0x7fffffffe010) at dl-init.c:126 #10 0x00007ffff7deec70 in dl\_open\_worker (a=a@entry=0x7fffffffb0e8) at dl-open.c:577 #11 0x00007ffff7de9ff4 in \_dl\_catch\_error ( objname=objname@entry=0x7fffffffb0d8, errstring=errstring@entry=0x7fffffffb0e0, mallocedp=mallocedp@entry=0x7fffffffb0d0, operate=operate@entry=0x7ffff7dee9a0 \, args=args@entry=0x7fffffffb0e8) at dl-error.c:187 #12 0x00007ffff7dee3bb in \_dl\_open ( file=0x7fffc90ac8f4 “/usr/local/lib/python2.7/dist-packages/dsd/\_dsd\_swig.so”, mode=-2147483390, caller\_dlopen=, nsid=-2, argc=2, argv=0x7fffffffdff8, env=0x7fffffffe010) at dl-open.c:661 #13 0x00007ffff75f302b in dlopen\_doit (a=a@entry=0x7fffffffb300) at dlopen.c:66 #14 0x00007ffff7de9ff4 in \_dl\_catch\_error (objname=0x9b3f80, errstring=0x9b3f88, mallocedp=0x9b3f78, operate=0x7ffff75f2fd0 \, args=0x7fffffffb300) at dl-error.c:187 #15 0x00007ffff75f362d in \_dlerror\_run ( operate=operate@entry=0x7ffff75f2fd0 \, args=args@entry=0x7fffffffb300) at dlerror.c:163 #16 0x00007ffff75f30c1 in \_\_dlopen (file=, mode=) at dlopen.c:87 #17 0x00000000005b6983 in \_PyImport\_GetDynLoadFunc () #18 0x0000000000426877 in \_PyImport\_LoadDynamicModule () #19 0x000000000046232a in ?? () #20 0x000000000052c6d5 in PyEval\_EvalFrameEx () #21 0x000000000052cf32 in PyEval\_EvalFrameEx () #22 0x000000000055c594 in PyEval\_EvalCodeEx () #23 0x00000000005b7392 in PyEval\_EvalCode () #24 0x00000000005b744a in PyImport\_ExecCodeModuleEx () #25 0x0000000000579f0f in ?? () #26 0x000000000055d3a3 in ?? () #27 0x000000000055d77c in ?? () #28 0x000000000055db37 in PyImport\_ImportModuleLevel () #29 0x00000000004755e7 in ?? () #30 0x00000000004da20b in PyEval\_CallObjectWithKeywords () ---
**Author:** ![Tom\_McDermott](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/t/9fc29f/32.png) [@Tom\_McDermott](https://www.ruby-forum.com/u/Tom_McDermott)\ **Post date:** [August 5, 2014, 5:45am UTC](https://www.ruby-forum.com/t/fwd-gnuradio-companion-core-dump/231348/2 "2014-08-05T05:45:00Z")
Hello, I already install gnu radio in ubuntu 14.04 with ctrl port Here is the command: _ **Ubuntu install** _ sudo apt-get update sudo apt-get install -y g++ git make cmake sdcc guile-2.0 ccache python-dev swig libfftw3-dev libcppunit-dev libboost1.54-all-dev libgsl0-dev libusb-1.0-0 libusb-1.0-0-dev alsa-base libasound2 libasound2-dev python-numpy python-cheetah python-lxml python-wxgtk2.8 python-qt4 python-qwt5-qt4 libqt4-opengl-dev libqwt5-qt4-dev libfontconfig1-dev libxrender-dev libxi-dev doxygen python-docutils liborc-0.4-dev libmcpp-dev libbz2-dev libssl-dev libdb+±dev libzmq3-dev python-sphinx libcomedi-dev python-zmq _ **uhd install** _ git clone git://github.com/EttusResearch/uhd.git cd uhd/host/ mkdir build cd build cmake …/ make make test sudo make install sudo ldconfig sudo “/usr/local/lib/uhd/utils/uhd\_images\_downloader.py” _ **ice install** _ [http://download.zeroc.com/Ice/3.5/Ice-3.5.1.tar.gz](http://download.zeroc.com/Ice/3.5/Ice-3.5.1.tar.gz) tar xvfz Ice-3.5.1.tar.gz cd Ice-3.5.1/cpp make make test sudo make install sudo ldconfig _**cd ~; sudo vim .bashrc (Add following at the bottom)**_ ==\> export ICE\_HOME=/opt/Ice-3.5.1 ==\> export PATH=`pwd`/bin:$PATH ==\> export LD\_LIBRARY\_PATH=`pwd`/lib:$LD\_LIBRARY\_PATH cd Ice-3.5.1/py make make install _**cd ~; sudo vim .bashrc (Add following at the bottom)**_ ==\> export ICEPY\_HOME=/opt/Ice-3.5.1 ==\> export PYTHONPATH=$ICEPY\_HOME/python:$PYTHONPATH _ **gnuradio install** _ git clone [http://git.gnuradio.org/git/gnuradio.git](http://git.gnuradio.org/git/gnuradio.git) cd gnuradio mkdir build cd build cmake …/ make make test sudo make install _**cd ~; sudo vim .bashrc (Add following at the bottom)**_ ==\> alias sudo=‘sudo env PATH=/opt/Ice-3.5.1/bin:$PATH LD\_LIBRARY\_PATH=/opt/Ice-3.5.1/lib:$LD\_LIBRARY\_PATH ICE\_HOME=/opt/Ice-3.5.1 PYTHONPATH=/opt/Ice-3.5.1/python:$PYTHONPATH ICEPY\_HOME=/opt/Ice-3.5.1’ You can try it. Greetings, Jeff Guo