# FPGA original firmware problems

**URL:** <https://www.ruby-forum.com/t/fpga-original-firmware-problems/112511>\
**Category:** GNU Radio\
**Created:** [August 20, 2007, 1:34pm UTC](https://www.ruby-forum.com/t/fpga-original-firmware-problems/112511 "2007-08-20T13:34:34Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Goutourhs\_Goutourid](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/g/3d9bf3/32.png) [@Goutourhs\_Goutourid](https://www.ruby-forum.com/u/Goutourhs_Goutourid)\
**Post date:** [August 20, 2007, 1:34pm UTC](https://www.ruby-forum.com/t/fpga-original-firmware-problems/112511/1 "2007-08-20T13:34:34Z")

</div>

Hello list, First I apologise for posting in the Recovering x(t) from IQ  
samples thread, please delete my post there if possible. I also removed  
my old account from the list and created this new one.  
I have recently changed the USRP clock with an external PLL. Then I used  
the previously precompiled standard firmware std\_4rx\_0tx.rbf , using 2  
sinusoidal inputs (2.1 MHz) to RXA, RXB with the results confirming that  
everything was working fine. I then downloaded the 3.0.4 version and  
tried to recompile the usrp\_std project. I used the usrp\_std.rbf file  
produced with the rx\_cfile.py, feeding the RXA, RXB each with the same  
sinusoidal signal and when I plotted the output I found out that I was  
getting 0 values only.  
I then used again the std\_4rx\_0tx.rbf file which resulted in the  
expected output (sinusoidal signals at the same frequency) with  
amplitudes ranging from -15500 to 15500. . I then used another firmware  
which actually produces known data from within the rx\_buffer.v file, (a  
signal that cycles from 0 to 15 and back to 0) and the output was as  
expected again, linear increase from 0 to 15 and then back to 0. I then  
tried other versions of the firmware that there were working, as Peter  
Monta’s variable width and shift firmware, but again I was getting 0  
values at this time.  
Does anyone has an idea what might be wrong? Why do I get nothing at the  
output when I use .rbf from the recompilation of the usrp\_std project?  
Why some .rbfs work and some not?  
Thank you  
Rigas Ioannides
