# Flashing USRP 2942R firmware

**URL:** <https://www.ruby-forum.com/t/flashing-usrp-2942r-firmware/242200>\
**Category:** GNU Radio\
**Created:** [June 3, 2015, 10:09pm UTC](https://www.ruby-forum.com/t/flashing-usrp-2942r-firmware/242200 "2015-06-03T22:09:32Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Detlef\_R](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/d/58f4c7/32.png) [@Detlef\_R](https://www.ruby-forum.com/u/Detlef_R)\
**Post date:** [June 3, 2015, 10:09pm UTC](https://www.ruby-forum.com/t/flashing-usrp-2942r-firmware/242200/1 "2015-06-03T22:09:32Z")

</div>

Hi

Will I be able to flash the USRP 2942R firmware to use Gnuradio and then  
reflash it later to be able to use it again in Labview?

I just want to be 100% sure that I can go back and forth without  
bricking my board.