# FCDproplus: "FunCumb Dongle V2.0 soundcard found but not controlpart"

**URL:** <https://www.ruby-forum.com/t/fcdproplus-funcumb-dongle-v2-0-soundcard-found-but-not-controlpart/241834>\
**Category:** GNU Radio\
**Created:** [May 5, 2015, 5:31am UTC](https://www.ruby-forum.com/t/fcdproplus-funcumb-dongle-v2-0-soundcard-found-but-not-controlpart/241834 "2015-05-05T05:31:22Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![musicdenotation](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/ea666f/32.png) [@musicdenotation](https://www.ruby-forum.com/u/musicdenotation)\
**Post date:** [May 5, 2015, 5:31am UTC](https://www.ruby-forum.com/t/fcdproplus-funcumb-dongle-v2-0-soundcard-found-but-not-controlpart/241834/1 "2015-05-05T05:31:22Z")

</div>

There were a few threads a while back where this problem was  
discussed.It seemed the issue was never debugged, just disappeared after  
a clean install.  
About as clean as I know to make it:  
Running Ubuntu 14.04 LTS from wiped clean (as of 5/4/2015), 64 bit  
desktopDownloaded and installed today’s PybombsInstalled osmocom, rtl  
and gr-fcdproplu  
RTL and osmocom work fine.  
Completed with a Pybombs update  
Rumors else indicate this is a UDEV permissions issue.  
Ideas?  
Gregnz8r

---

<div class="post-metadata">

**Author:** ![Gregory\_WSRatcliff](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/g/898d66/32.png) [@Gregory\_WSRatcliff](https://www.ruby-forum.com/u/Gregory_WSRatcliff)\
**Post date:** [May 5, 2015, 7:15am UTC](https://www.ruby-forum.com/t/fcdproplus-funcumb-dongle-v2-0-soundcard-found-but-not-controlpart/241834/2 "2015-05-05T07:15:21Z")

</div>

gr-fcdproplus does not need controlport.

You’ll find the udev rules in the readme.

If this does not help, post the error message.

– Volker

Am 05.05.2015 um 05:30 schrieb Gregory W. Ratcliff: