# Example of how mount the radio environment in gnuradio-companion

**URL:** <https://www.ruby-forum.com/t/example-of-how-mount-the-radio-environment-in-gnuradio-companion/217804>\
**Category:** GNU Radio\
**Created:** [March 13, 2012, 5:26pm UTC](https://www.ruby-forum.com/t/example-of-how-mount-the-radio-environment-in-gnuradio-companion/217804 "2012-03-13T17:26:48Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![luislavena](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/l/0ea827/32.png) [@luislavena](https://www.ruby-forum.com/u/luislavena)\
**Post date:** [March 13, 2012, 5:26pm UTC](https://www.ruby-forum.com/t/example-of-how-mount-the-radio-environment-in-gnuradio-companion/217804/1 "2012-03-13T17:26:48Z")

</div>

Does anyone have any examples of how to mount the transmitter and  
receiver in  
the gnuradio-companion, so I can assemble and make ready the radio  
environment in gnuradio-companion and then test the diagram with the  
USRP?

---

<div class="post-metadata">

**Author:** ![ketlin\_Pedron](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/k/58f4c7/32.png) [@ketlin\_Pedron](https://www.ruby-forum.com/u/ketlin_Pedron)\
**Post date:** [March 15, 2012, 1:38am UTC](https://www.ruby-forum.com/t/example-of-how-mount-the-radio-environment-in-gnuradio-companion/217804/2 "2012-03-15T01:38:23Z")

</div>

Ketlin -

I don’t think I understood your question.

That said, there are lots of examples regarding how to use GRC that come  
with GNU Radio, that are on the mailing list, and even on the  
gnuradio.orgwebsite.

/examples/grc  
[http://gnuradio.org/redmine/projects/gnuradio/wiki/GNURadioCompanion](http://gnuradio.org/redmine/projects/gnuradio/wiki/GNURadioCompanion)

Cheers,  
Ben

---

<div class="post-metadata">

**Author:** ![ketlin\_Pedron](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/k/58f4c7/32.png) [@ketlin\_Pedron](https://www.ruby-forum.com/u/ketlin_Pedron)\
**Post date:** [March 20, 2012, 6:14pm UTC](https://www.ruby-forum.com/t/example-of-how-mount-the-radio-environment-in-gnuradio-companion/217804/3 "2012-03-20T18:14:37Z")

</div>

Hi Ben!

The website of the gnuradio has only examples to be run with the USRP  
board, what happens is that I have not USRP board, but I know that it is  
possible to mount the radio environment in the GRC, and then test with  
the  
USRP ( I’ll do it when I receive the USRP), while I have no USRP I’m  
trying  
to figure out how to mount the radio and test environment without USRP  
board.

Thank you and sorry if my English is poor (I’m from Brazil and I’m  
learning) !!  
Ketlin.

2012/3/14 Ben H. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)