# Ekiga? **URL:** \ **Category:** GNU Radio\ **Created:** [March 22, 2013, 9:25am UTC](https://www.ruby-forum.com/t/ekiga/227640 "2013-03-22T09:25:15Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![gruzurg](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/g/a8b319/32.png) [@gruzurg](https://www.ruby-forum.com/u/gruzurg)\ **Post date:** [March 22, 2013, 9:25am UTC](https://www.ruby-forum.com/t/ekiga/227640/1 "2013-03-22T09:25:15Z")
Maybe not the correct place to ask the question ?. But how do I set up/read about seeting up ekiga to be used with gnuradio meetings ?. Is it via one’s phone, or just via one’s PC’s audio ?. 73s Erik OZ4KK ---
**Author:** ![gruzurg](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/g/a8b319/32.png) [@gruzurg](https://www.ruby-forum.com/u/gruzurg)\ **Post date:** [March 22, 2013, 10:43am UTC](https://www.ruby-forum.com/t/ekiga/227640/2 "2013-03-22T10:43:35Z")
The Ekiga website has some good infos: > **[Ekiga ~ Free Your Speech](https://www.ekiga.org/)** The most common way is to install a SIP-client on your PC (and then use a headset with your soundcard) and get an Ekiga-account to access the VoIP network. MB On Fri, Mar 22, 2013 at 09:24:07AM +0100, Erik J. wrote: > [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) > [Discuss-gnuradio Info Page](https://lists.gnu.org/mailman/listinfo/discuss-gnuradio) – Karlsruhe Institute of Technology (KIT) Communications Engineering Lab (CEL) Dipl.-Ing. Martin B. Research Associate Kaiserstraße 12 Building 05.01 76131 Karlsruhe Phone: +49 721 608-43790 Fax: +49 721 608-46071 www.cel.kit.edu KIT – University of the State of Baden-Württemberg and National Laboratory of the Helmholtz Association ---
**Author:** ![gruzurg](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/g/a8b319/32.png) [@gruzurg](https://www.ruby-forum.com/u/gruzurg)\ **Post date:** [March 22, 2013, 11:03am UTC](https://www.ruby-forum.com/t/ekiga/227640/3 "2013-03-22T11:03:28Z")
Many thanks Martin, but I’m in doubt about the phone settings setup. I already have an account: _sip:removed\_email\_address@domain.invalid_ And ekiga is installed But the voip is not setup. 73s Erik OZ4KK ---
**Author:** ![gruzurg](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/g/a8b319/32.png) [@gruzurg](https://www.ruby-forum.com/u/gruzurg)\ **Post date:** [March 23, 2013, 10:09am UTC](https://www.ruby-forum.com/t/ekiga/227640/4 "2013-03-23T10:09:25Z")
How is it that one should call the gnuradio meeting with ekiga ?. 73s Erik OZ4KK ---
**Author:** ![gruzurg](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/g/a8b319/32.png) [@gruzurg](https://www.ruby-forum.com/u/gruzurg)\ **Post date:** [March 23, 2013, 12:50pm UTC](https://www.ruby-forum.com/t/ekiga/227640/5 "2013-03-23T12:50:04Z")
Hi Erik, the SIP contact and all is listed on [http://gnuradio.org/redmine/projects/gnuradio/wiki/DevelopersCalls](http://gnuradio.org/redmine/projects/gnuradio/wiki/DevelopersCalls) MB On Sat, Mar 23, 2013 at 10:08:00AM +0100, Erik J. wrote: > ``` > And ekiga is installed > network. > > Discuss-gnuradio mailing list > removed_email_address@domain.invalid > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > ``` > * * * > > Discuss-gnuradio mailing list > [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) > [Discuss-gnuradio Info Page](https://lists.gnu.org/mailman/listinfo/discuss-gnuradio) – Karlsruhe Institute of Technology (KIT) Communications Engineering Lab (CEL) Dipl.-Ing. Martin B. Research Associate Kaiserstraße 12 Building 05.01 76131 Karlsruhe Phone: +49 721 608-43790 Fax: +49 721 608-46071 www.cel.kit.edu KIT – University of the State of Baden-Württemberg and National Laboratory of the Helmholtz Association