# Doxygen Support

**URL:** <https://www.ruby-forum.com/t/doxygen-support/233034>\
**Category:** GNU Radio\
**Created:** [November 12, 2014, 6:32pm UTC](https://www.ruby-forum.com/t/doxygen-support/233034 "2014-11-12T18:32:02Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![addis\_a](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/a/c4cdca/32.png) [@addis\_a](https://www.ruby-forum.com/u/addis_a)\
**Post date:** [November 12, 2014, 6:32pm UTC](https://www.ruby-forum.com/t/doxygen-support/233034/1 "2014-11-12T18:32:02Z")

</div>

I just reinstalled uhd+gnuradio with doxygen support enabled. I’m not  
seeing any difference in the blocks I had hoped to see a difference in,  
as  
far as documentation goes. For example, when I double click the  
Frequency  
Mod block, the documentation tab is the same as it was before.

I’m trying to install documentation, as referenced here:  
[http://gnuradio.org/redmine/projects/gnuradio/wiki/GNURadioCompanion#Installing-Icons-Mime-Type-and-Menu-Items](http://gnuradio.org/redmine/projects/gnuradio/wiki/GNURadioCompanion#Installing-Icons-Mime-Type-and-Menu-Items)

Can someone tell me what to expect if I installed it correctly, and  
maybe  
expand on that link explaining what I should do to install it.

Thanks,  
Rich

---

<div class="post-metadata">

**Author:** ![reback](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/r/b5ac83/32.png) [@reback](https://www.ruby-forum.com/u/reback)\
**Post date:** [November 15, 2014, 12:16am UTC](https://www.ruby-forum.com/t/doxygen-support/233034/2 "2014-11-15T00:16:01Z")

</div>

Hi Richard -

What are you seeing? I have Doxygen installed, and this is what I see  
under  
the ‘Documentation’ tab for that block:

— frequency\_modulator\_fc —

```
    make(double sensitivity) -> frequency_modulator_fc_sptr

    Frequency modulator block.

    float input; complex baseband output

    Constructor Specific Documentation:

    Build a frequency modulator block.

    Args:
        sensitivity : radians/sample = amplitude * sensitivity

```

— frequency\_modulator\_fc\_make —

```
frequency_modulator_fc_make(double sensitivity) ->

```

frequency\_modulator\_fc\_sptr

```
Frequency modulator block.

float input; complex baseband output

Constructor Specific Documentation:

Build a frequency modulator block.

Args:
    sensitivity : radians/sample = amplitude * sensitivity

```

— frequency\_modulator\_fc\_sptr —

Proxy of C++ boost::shared\_ptr\<(gr::analog::frequency\_modulator\_fc)\>  
class

Cheers,  
Ben

On Wed, Nov 12, 2014 at 9:30 AM, Richard B. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)