# Documentation typo **URL:** \ **Category:** NGINX\ **Created:** [November 10, 2010, 12:39pm UTC](https://www.ruby-forum.com/t/documentation-typo/198902 "2010-11-10T12:39:03Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Dobai-Pataky\_BSSSSl](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/d/77aa72/32.png) [@Dobai-Pataky\_BSSSSl](https://www.ruby-forum.com/u/Dobai-Pataky_BSSSSl)\ **Post date:** [November 10, 2010, 12:39pm UTC](https://www.ruby-forum.com/t/documentation-typo/198902/1 "2010-11-10T12:39:03Z")
On page [http://nginx.org/en/docs/http/configuring\_https\_servers.html](http://nginx.org/en/docs/http/configuring_https_servers.html) It clearly should say “Since OpenSSL 0.9.8j this option…” or perhaps “…supports SNI since 0.8.9f version…”.  As is it’s logically inconsistent.  See extract: " In order to use SNI in nginx, it must be supported in both the OpenSSL library with which the nginx binary has been built as well as the library to which it is being dynamically linked at run time. OpenSSL supports SNI since 0.9.8f version if it was built with config option “–enable-tlsext”. Since OpenSSL 0.8.9j this option is enabled by default. If nginx was built with SNI support, then nginx will show this when run with the “-V” switch: " – Sent from Pre phone - Please forgive typos ---
**Author:** ![Merlin\_Meyer-Mitche](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/35a633/32.png) [@Merlin\_Meyer-Mitche](https://www.ruby-forum.com/u/Merlin_Meyer-Mitche)\ **Post date:** [November 11, 2010, 6:26am UTC](https://www.ruby-forum.com/t/documentation-typo/198902/2 "2010-11-11T06:26:00Z")
On Wed, 10 Nov 2010 14:42:41 +0300 Igor S. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) wrote: > > " > > OpenSSL supports SNI starting with 0.9.8f version. Nowever, you have to > enable this capability during OpenSSL building using the option > “–enable-tlsext”. Since OpenSSL 0.8.9j this option is enabled by default. > > Is this better ? “”“version. Nowever, you have to enable this “”” → version. However, you have to enable this seems better to me. Cheers, C. ---
**Author:** ![Merlin\_Meyer-Mitche](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/35a633/32.png) [@Merlin\_Meyer-Mitche](https://www.ruby-forum.com/u/Merlin_Meyer-Mitche)\ **Post date:** [November 11, 2010, 5:45am UTC](https://www.ruby-forum.com/t/documentation-typo/198902/3 "2010-11-11T05:45:55Z")
On Wed, Nov 10, 2010 at 06:33:57AM -0500, Merlin Meyer-Mitchell wrote: > On page > > [Configuring HTTPS servers](http://nginx.org/en/docs/http/configuring_https_servers.html) > > It clearly should say “Since OpenSSL 0.9.8j this option…” or perhaps > “…supports SNI since 0.8.9f version…”.  As is it’s logically > inconsistent.  See extract: > > " > In order to use SNI in nginx, it must be supported in both the OpenSSL library > with which the nginx binary has been built as well as the library to which it is > being dynamically linked at run time. OpenSSL supports SNI since 0.9.8f version if > it was built with config option “–enable-tlsext”. Since OpenSSL 0.8.9j this > option is enabled by default. If nginx was built with SNI support, then nginx will > show this when run with the “-V” switch: > " OpenSSL supports SNI starting with 0.9.8f version. Nowever, you have to enable this capability during OpenSSL building using the option “–enable-tlsext”. Since OpenSSL 0.8.9j this option is enabled by default. Is this better ? – Igor S. > **[Igor Sysoev](http://sysoev.ru/en/)** ---
**Author:** ![Merlin\_Meyer-Mitche](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/35a633/32.png) [@Merlin\_Meyer-Mitche](https://www.ruby-forum.com/u/Merlin_Meyer-Mitche)\ **Post date:** [November 11, 2010, 6:36am UTC](https://www.ruby-forum.com/t/documentation-typo/198902/4 "2010-11-11T06:36:39Z")
On Wed, Nov 10, 2010 at 03:26:41PM +0300, Maxim D. wrote: > > > It clearly should say “Since OpenSSL 0.9.8j this option…” or perhaps > > > “…supports SNI since 0.8.9f version…”.  As is it’s logically > > > inconsistent.  See extract: > > - 0.9.8j > Thank you, I have fixed the current edition. – Igor S. > **[Igor Sysoev](http://sysoev.ru/en/)** ---
**Author:** ![Merlin\_Meyer-Mitche](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/35a633/32.png) [@Merlin\_Meyer-Mitche](https://www.ruby-forum.com/u/Merlin_Meyer-Mitche)\ **Post date:** [November 11, 2010, 7:19am UTC](https://www.ruby-forum.com/t/documentation-typo/198902/5 "2010-11-11T07:19:16Z")
Hello again ! just checking the page, I fumble into another typo in the title of a section: “SSL certifcate chains” should be “SSL certificate chains”, I guess 😉 Cheers, C. On Wed, 10 Nov 2010 15:33:14 +0300 ---
**Author:** ![Merlin\_Meyer-Mitche](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/35a633/32.png) [@Merlin\_Meyer-Mitche](https://www.ruby-forum.com/u/Merlin_Meyer-Mitche)\ **Post date:** [November 11, 2010, 6:29am UTC](https://www.ruby-forum.com/t/documentation-typo/198902/6 "2010-11-11T06:29:45Z")
Hello! On Wed, Nov 10, 2010 at 02:42:41PM +0300, Igor S. wrote: > > " > > OpenSSL supports SNI starting with 0.9.8f version. Nowever, you have to > enable this capability during OpenSSL building using the option > “–enable-tlsext”. Since OpenSSL 0.8.9j this option is enabled by default. - 0.8.9j - 0.9.8j > Is this better ? Maxim D.