# Distributing apps on Windows

**URL:** <https://www.ruby-forum.com/t/distributing-apps-on-windows/148480>\
**Category:** Ruby-Gnome 2\
**Created:** [September 13, 2008, 10:28am UTC](https://www.ruby-forum.com/t/distributing-apps-on-windows/148480 "2008-09-13T10:28:26Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![mikec](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/977dab/32.png) [@mikec](https://www.ruby-forum.com/u/mikec)\
**Post date:** [September 13, 2008, 10:28am UTC](https://www.ruby-forum.com/t/distributing-apps-on-windows/148480/1 "2008-09-13T10:28:26Z")

</div>

I know this was talked about briefly a while ago, but  
I wasn’t paying attention 😉 I need to distribute my  
application to a wide audience of non-technical  
Windows users. What is the best way to go?

I’ve made gems (it’s all pure ruby) so for Linux  
people it’s pretty easy just to install ruby, ruby-gnome  
and then install the gems. But for Windows  
users, I’d like to avoid the 23 meg “Single Click  
Ruby” download. Also, I’m not sure how to install  
the latest ruby-gnome bindings on Windows even  
myself.

I took a look at tar2rubyscript and rubyscript2exe,  
and they look useful, but I’m still left with no easy  
way to get ruby-gnome installed.

I seem to remember that Mathieu mentioned a  
potential solution (Hi!, BTW – Yes, I’m finally releasing  
a new version of JLDrill 🙂 )

I don’t necessarily mind asking the users to install  
ruby and ruby-gnome so if I can find an easy way to  
do that (and a slightly less kitchen-sink install for  
ruby) and an easy way to install my gems, then  
that would be fine too.

```
     Thanks in advance for any help!
               MikeC

```

P.S. And after all that, I also want an easy way to  
do the same for OSX. But Windows is higher priority  
right now.

---

<div class="post-metadata">

**Author:** ![mikec](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/977dab/32.png) [@mikec](https://www.ruby-forum.com/u/mikec)\
**Post date:** [September 15, 2008, 5:43am UTC](https://www.ruby-forum.com/t/distributing-apps-on-windows/148480/2 "2008-09-15T05:43:01Z")

</div>

Hi Mike! Nice to see an email from you. 🙂

My approach for my program was a little bit of a brute-force approach:  
package everything necessary into one big zip file. This includes  
Ruby, GTK, and RG2. The user can unpack the zip file anywhere on his  
computer.

1. I uninstalled Ruby and GTK to make sure that my package would work  
even if the user doesn’t have them installed.

2. I made an executable whose role is to run the command “rubyw  
/path/to/myapp.rb”. You can see it as a “process launcher”. I made an  
executable because this is the only way I found to hide the command  
prompt that is displayed if you use a .bat file.

3. myapp.rb updates the ruby load path and the windows path to include  
the path of ruby dependencies and GTK dlls. I concatenated #{Dir.pwd}  
with relative paths so that this works anywhere.

4. For the dlls that GTK loads at runtime, I replaced absolute paths  
with relative paths in the GTK configuration files generated by the  
gladewin32 installer.

Pros and cons of my approach:

- The final package can be pretty big! However you can gain a lot of  
space by removing unnecessary libs from the Ruby stdlib and removimg  
po files from GTK2. (I didn’t try to reduce the size in my case)

- The load is much faster than a program generated by rubyscript2exe.  
This is because rubyscript2exe unpacks the content embedded in to the  
.exe file at every start while with my approach all the content is  
already on the hard disk.

- When I need to do a new release of my software, unless I want to  
upgrade Ruby or GTK, I take the previous release, replace my  
application folder and that’s it!

- Since installing the software is simply a matter of unzipping the  
package, this may be confusing for people who would expect an  
installer (this pretty much the standard way of installing software in  
Windows). Plus, menu and desktop shortcuts are not created. Therefore  
it may be interesting to combine this approach with a NSIS installer.

You can take a look at my package as an example  
[http://www.mblondel.org/files/fantasdic/fantasdic-1.0-beta6-mswin32.zip](http://www.mblondel.org/files/fantasdic/fantasdic-1.0-beta6-mswin32.zip)

In particular have a look at fantasdic/win32/

Mathieu

2008/9/13 Mike C. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid):

---

<div class="post-metadata">

**Author:** ![mikec](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/977dab/32.png) [@mikec](https://www.ruby-forum.com/u/mikec)\
**Post date:** [September 15, 2008, 11:09am UTC](https://www.ruby-forum.com/t/distributing-apps-on-windows/148480/3 "2008-09-15T11:09:18Z")

</div>

> 1. I made an executable whose role is to run the command “rubyw  
> /path/to/myapp.rb”. You can see it as a “process launcher”. I made an  
> executable because this is the only way I found to hide the command  
> prompt that is displayed if you use a .bat file.

Hi:

this is the same i do, but the exe what kind of API use to launch the  
rubyw??

Perhaps the g\_spawn??

regards.

---

<div class="post-metadata">

**Author:** ![mikec](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/977dab/32.png) [@mikec](https://www.ruby-forum.com/u/mikec)\
**Post date:** [September 15, 2008, 1:14pm UTC](https://www.ruby-forum.com/t/distributing-apps-on-windows/148480/4 "2008-09-15T13:14:56Z")

</div>

2008/9/15 Martin (OpenGeoMap) [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid):

> Hi:
> 
> this is the same i do, but the exe what kind of API use to launch the  
> rubyw??
> 
> Perhaps the g\_spawn??

I use “CreateProcess” from the windows API.

[http://svn.gnome.org/viewvc/fantasdic/trunk/win32/fantasdic.c?revision=218&view=markup](http://svn.gnome.org/viewvc/fantasdic/trunk/win32/fantasdic.c?revision=218&view=markup)

Mathieu

---

<div class="post-metadata">

**Author:** ![mikec](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/977dab/32.png) [@mikec](https://www.ruby-forum.com/u/mikec)\
**Post date:** [September 15, 2008, 3:53pm UTC](https://www.ruby-forum.com/t/distributing-apps-on-windows/148480/5 "2008-09-15T15:53:23Z")

</div>

hi:

> I use “CreateProcess” from the windows API.
> 
> [http://svn.gnome.org/viewvc/fantasdic/trunk/win32/fantasdic.c?revision=218&view=markup](http://svn.gnome.org/viewvc/fantasdic/trunk/win32/fantasdic.c?revision=218&view=markup)
> 
> Mathieu

Thanks. I used the system function and mingw compiler with the windows  
option, but the console was there hehe.

In the respect to find the dependencies i use the rubyscript2exe and  
after extract this files:

When the exe start the file is unzip here:  
C:\Documents and Settings\mrodriguez\eee

In that folder you can extract all files like this:

/application/.exe --eee-justextract

the problem is the extensions’ dependencies in DLLs. You need copy the  
etc, lib/pango and shared by hand to this folder .

Here the explain to use the exe, but i see that really slowly for real  
projects:  
[http://ruby-gnome2.sourceforge.jp/hiki.cgi?tips\_rubyscript2exe](http://ruby-gnome2.sourceforge.jp/hiki.cgi?tips_rubyscript2exe)

and finally i launch the app like this:

bin\rubyw.exe -r .\bootstrap.rb -T1 empty.rb .\app/application/.rb

I used in a project using pdf-writer, gtk and sqlite. rubyscript2exe  
work perfect in all less in the GTK extensions’ dependencies

Regards.

---

<div class="post-metadata">

**Author:** ![mikec](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/977dab/32.png) [@mikec](https://www.ruby-forum.com/u/mikec)\
**Post date:** [September 15, 2008, 5:03pm UTC](https://www.ruby-forum.com/t/distributing-apps-on-windows/148480/6 "2008-09-15T17:03:37Z")

</div>

Unless I missed something, this seems like a great solution or?

When I am on windows I mostly just care that things work. I dont mind if  
they are bundled in a huge .exe or .zip or something at all. 🙂
