# Code of USRP experimental setup of full-duplex radio

**URL:** <https://www.ruby-forum.com/t/code-of-usrp-experimental-setup-of-full-duplex-radio/234261>\
**Category:** GNU Radio\
**Created:** [February 19, 2015, 1:35pm UTC](https://www.ruby-forum.com/t/code-of-usrp-experimental-setup-of-full-duplex-radio/234261 "2015-02-19T13:35:18Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![addis\_a](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/a/c4cdca/32.png) [@addis\_a](https://www.ruby-forum.com/u/addis_a)\
**Post date:** [February 19, 2015, 1:35pm UTC](https://www.ruby-forum.com/t/code-of-usrp-experimental-setup-of-full-duplex-radio/234261/1 "2015-02-19T13:35:18Z")

</div>

Hi everyone,

I should create a testbed with USRP2 devices or stimulate a full-duplex  
environment with ns-2. So, I need the code of experimental setup to  
implement a practical 802.15.4 full-duplex radio or any full-duplex  
environment. If possible, can you provide me with the code of USRP  
experimental setup of full-duplex application or ns-2 simulation of  
full-duplex environment ? I would very grateful to you if you help me  
because I didn’t find the code in the Internet.

I appreciate your time and consideration.

Best regards,  
Nader Bouacida

* * *

This message and its contents including attachments are intended solely  
for the original recipient. If you are not the intended recipient or  
have received this message in error, please notify me immediately and  
delete this message from your computer system. Any unauthorized use or  
distribution is prohibited. Please consider the environment before  
printing this email.

---

<div class="post-metadata">

**Author:** ![Nader\_Bouacida](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/n/a6a055/32.png) [@Nader\_Bouacida](https://www.ruby-forum.com/u/Nader_Bouacida)\
**Post date:** [February 19, 2015, 1:53pm UTC](https://www.ruby-forum.com/t/code-of-usrp-experimental-setup-of-full-duplex-radio/234261/2 "2015-02-19T13:53:33Z")

</div>

On 02/19/2015 01:33 PM, Nader Bouacida wrote:

> I should create a testbed with USRP2 devices or stimulate a  
> full-duplex environment with ns-2. So, I need the code of experimental  
> setup to implement a practical 802.15.4 full-duplex radio or any  
> full-duplex environment. If possible, can you provide me with the code  
> of USRP experimental setup of full-duplex application or ns-2 simulation  
> of full-duplex environment ? I would very grateful to you if you help me  
> because I didn’t find the code in the Internet.
> 
> I appreciate your time and consideration.

Nader,

I find that hard to believe. I get tons of results using the search  
engine of my choice, and it’s even in PyBOMBS. Please have another look.

M

---

<div class="post-metadata">

**Author:** ![Nader\_Bouacida](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/n/a6a055/32.png) [@Nader\_Bouacida](https://www.ruby-forum.com/u/Nader_Bouacida)\
**Post date:** [February 20, 2015, 1:26pm UTC](https://www.ruby-forum.com/t/code-of-usrp-experimental-setup-of-full-duplex-radio/234261/3 "2015-02-20T13:26:30Z")

</div>

Nader,

an apology for making that sound a bit rough. You did mention you were a  
beginner, so I should have expanded the answer.

My second point was a link to our module management system. Using that  
(and you might even have used to install GNU Radio itself) you can  
simply install an 802.15.4 module (you’ll need to check how complete it  
is). Follow the instructions on the link I pointed out.

For me, Google returns said 802.15.4 module as first result, followed by  
lots and lots of papers. That might differ for you since Google  
personalizes their results. You won’t, however, need that if you use  
PyBOMBS (unless you’re searching for the papers).

Hope this was actually helpful!

Martin

---

<div class="post-metadata">

**Author:** ![Nader\_Bouacida](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/n/a6a055/32.png) [@Nader\_Bouacida](https://www.ruby-forum.com/u/Nader_Bouacida)\
**Post date:** [February 21, 2015, 12:45pm UTC](https://www.ruby-forum.com/t/code-of-usrp-experimental-setup-of-full-duplex-radio/234261/4 "2015-02-21T12:45:45Z")

</div>

Also, there were some 802.15.4-related talks at FOSDEM, but we’re still  
waiting for the videos to be uploaded. Just a sneak preview!

Cheers,  
M

---

<div class="post-metadata">

**Author:** ![Nader\_Bouacida](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/n/a6a055/32.png) [@Nader\_Bouacida](https://www.ruby-forum.com/u/Nader_Bouacida)\
**Post date:** [February 20, 2015, 1:00pm UTC](https://www.ruby-forum.com/t/code-of-usrp-experimental-setup-of-full-duplex-radio/234261/5 "2015-02-20T13:00:39Z")

</div>

Nader,

please answer to mailing list, not inviduals.

You can just use Google, you can find it here: [www.google.com](http://www.google.com) 🙂  
PyBOMBS: [http://gnuradio.org/redmine/projects/pybombs/wiki](http://gnuradio.org/redmine/projects/pybombs/wiki)

Cheers,  
M