# CMAKE GNU Radio 3.7.4 - gr-zeromq disabled

**URL:** <https://www.ruby-forum.com/t/cmake-gnu-radio-3-7-4-gr-zeromq-disabled/234505>\
**Category:** GNU Radio\
**Created:** [March 9, 2015, 10:36pm UTC](https://www.ruby-forum.com/t/cmake-gnu-radio-3-7-4-gr-zeromq-disabled/234505 "2015-03-09T22:36:08Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![addis\_a](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/a/c4cdca/32.png) [@addis\_a](https://www.ruby-forum.com/u/addis_a)\
**Post date:** [March 9, 2015, 10:36pm UTC](https://www.ruby-forum.com/t/cmake-gnu-radio-3-7-4-gr-zeromq-disabled/234505/1 "2015-03-09T22:36:08Z")

</div>

## Hello, i want to configure my GNUradio 3.7.4 by using this command cd /usr/local/src tar -zxf gnuradio-3.7.4.tar.gz cd gnuradio-3.7.4 mkdir build cd build cmake -DENABLE\_BAD\_BOOST=ON …/ make make test make install ldconfig i’ve run this command cmake -DENABLE\_BAD\_BOOST=ON …/ when i run make test it shows Configuring gr-wxgui support… – Dependency ENABLE\_GNURADIO\_RUNTIME = ON – Dependency ENABLE\_GR\_FFT = ON – Dependency ENABLE\_GR\_FILTER = ON – Dependency ENABLE\_GR\_ANALOG = ON – Dependency ENABLE\_PYTHON = ON – Dependency NUMPY\_FOUND = TRUE – Dependency WX\_FOUND = TRUE – Enabling gr-wxgui support. – Override with -DENABLE\_GR\_WXGUI=ON/OFF – Could NOT find ZEROMQ (missing: ZEROMQ\_INCLUDE\_DIRS)

## – Configuring gr-zeromq support… – Dependency Boost\_FOUND = TRUE – Dependency ENABLE\_GNURADIO\_RUNTIME = ON – Dependency ZEROMQ\_FOUND = FALSE – Disabling gr-zeromq support. – Override with -DENABLE\_GR\_ZEROMQ=ON/OFF

## – ###################################################### – # Gnuradio enabled components – ###################################################### – \* python-support – \* testing-support – \* volk – \* doxygen – \* gnuradio-runtime – \* gr-blocks – \* gnuradio-companion – \* gr-fec – \* gr-fft – \* gr-filter – \* gr-analog – \* gr-digital – \* gr-atsc – \* gr-audio – \* gr-channels – \* gr-noaa – \* gr-pager – \* gr-qtgui – \* gr-trellis – \* gr-uhd – \* gr-utils – \* gr-video-sdl – \* gr-vocoder – \* gr-fcd – \* gr-wavelet – \* gr-wxgui

## – ###################################################### – # Gnuradio disabled components – ###################################################### – \* sphinx – \* gr-ctrlport – \* gr-comedi – \* gr-zeromq

– Using install prefix: /usr/local  
– Building for version: 3.7.4 / 3.7.4  
– Configuring done  
– Generating done

I use ubuntu 12.04 LTS 32 bit  
to run openbts 4.0, is gr-zeromq must be enable?  
if yes,  
what should i do to make my gr-zeromq enable?  
​  
Thanks,  
Zai

---

<div class="post-metadata">

**Author:** ![Ahmad\_Zainudin](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/a/b5ac83/32.png) [@Ahmad\_Zainudin](https://www.ruby-forum.com/u/Ahmad_Zainudin)\
**Post date:** [March 9, 2015, 10:41pm UTC](https://www.ruby-forum.com/t/cmake-gnu-radio-3-7-4-gr-zeromq-disabled/234505/2 "2015-03-09T22:41:07Z")

</div>

Hi Ahmad,

to run OpenBTS, you don’t need GNU Radio at all.  
If you’re actually wanting to compile GNU Radio with zeroMQ support, I  
suggest you move away from a three years old, two years obsolete version  
of Ubuntu.

Best regards,  
Marcus M??ller