# Can't add page part with Shards installed? **URL:** \ **Category:** Radiant CMS\ **Created:** [November 7, 2007, 8:17am UTC](https://www.ruby-forum.com/t/cant-add-page-part-with-shards-installed/119468 "2007-11-07T08:17:45Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![marcelo\_a](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/e9a140/32.png) [@marcelo\_a](https://www.ruby-forum.com/u/marcelo_a)\ **Post date:** [November 7, 2007, 8:17am UTC](https://www.ruby-forum.com/t/cant-add-page-part-with-shards-installed/119468/1 "2007-11-07T08:17:45Z")
Hi, guys. I am currently trying out Radiant, and I have the intention of writing an admin extension to it. It seems to me that this is easier/better using the Shards extension, so I used Piston to import shards (from the trunk, revision 571, which seems to be the latest) to vendor/extensions/shards. I also have Radiant imported from the trunk (revision 575), using Piston, to vendor/radiant. I am not using any other extensions, and even so I made sure, on environment.rb, that shards was loaded before anything else. Now, when I try to add a page part to a page, what happens is the following: 1. I click on the green plus sign on the far right 2. The little window pops up, and I write the name of my page part 3. FireBug reports an error (the console output is here: [Parked at Loopia](http://pastie.caboo.se/114928)) 4. Radiant goes to /admin/ui/pages/part/add, where it renders “admin/page/\_part”, with no layout. The log can be seen here: [Parked at Loopia](http://pastie.caboo.se/114925) 5. Upon going back to the admin interface, no page parts were added. Does anyone have a clue on why this is happening? Thanks, Marcelo A… ---
**Author:** ![marcelo\_a](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/e9a140/32.png) [@marcelo\_a](https://www.ruby-forum.com/u/marcelo_a)\ **Post date:** [November 7, 2007, 8:21am UTC](https://www.ruby-forum.com/t/cant-add-page-part-with-shards-installed/119468/2 "2007-11-07T08:21:51Z")
Marcelo A. wrote: > [Parked at Loopia](http://pastie.caboo.se/114925) > 5) Upon going back to the admin interface, no page parts were added. > > Does anyone have a clue on why this is happening? > > Thanks, > Marcelo A… Hi Marcelo I had the exact same problem without Shards on Rev 573. It seemed to be fixed in Rev 575 of Radiant. Can you verify that it works fine without Shards? Also, are you using copy\_move extension? The archive previously on the site (if you didn’t get it by darcs) was a bit outdated and _may_ have had something to do with it. Cheers, Mohit. 11/7/2007 | 3:20 PM. ---
**Author:** ![marcelo\_a](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/e9a140/32.png) [@marcelo\_a](https://www.ruby-forum.com/u/marcelo_a)\ **Post date:** [November 7, 2007, 8:23am UTC](https://www.ruby-forum.com/t/cant-add-page-part-with-shards-installed/119468/3 "2007-11-07T08:23:01Z")
Marcelo A. wrote: > [Parked at Loopia](http://pastie.caboo.se/114925) > 5) Upon going back to the admin interface, no page parts were added. > > Does anyone have a clue on why this is happening? > > Thanks, > Marcelo A… Sorry, I just noticed that you say that you are not using any other extensions. Can you confirm that it works fine without Shards? Cheers, Mohit. 11/7/2007 | 3:21 PM. ---
**Author:** ![marcelo\_a](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/e9a140/32.png) [@marcelo\_a](https://www.ruby-forum.com/u/marcelo_a)\ **Post date:** [November 7, 2007, 3:50pm UTC](https://www.ruby-forum.com/t/cant-add-page-part-with-shards-installed/119468/4 "2007-11-07T15:50:23Z")
Sorry for the issues. I updated the core yesterday with Mislav’s JS patch but did not get Shards updated. I will do so today. Sean ---
**Author:** ![marcelo\_a](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/e9a140/32.png) [@marcelo\_a](https://www.ruby-forum.com/u/marcelo_a)\ **Post date:** [November 7, 2007, 1:31pm UTC](https://www.ruby-forum.com/t/cant-add-page-part-with-shards-installed/119468/5 "2007-11-07T13:31:31Z")
Hi! Thanks for your quick response. I did some “researching” here, and just found out that with my setup (Radiant gem 0.6.3, Ruby 1.8.6 on a Windows XP machine), if I do a regular “radiant site”, then “rake radiant:freeze:edge” (goes to revision 580), I get a weird thing when editing a page: all the parts’ tabs are duplicated! You can see it here: [http://marceloalvim.com/double\_parts.jpg](http://marceloalvim.com/double_parts.jpg). Oh, I also ran rake radiant:update and rake radiant:update:javascripts. I’m not sure when I should use those, but I thought it would be better do it than not. The “Blog” title was edited by me, but other than that, this came from a regular db:bootstrap. I checked the database, and it had no duplicated parts associated with the same page. So I tested it again, cleaning the database and checking out radiant from revision 575 of the trunk. Again, rake radiant:update and rake radiant:update:javascripts. No duplicated parts, and I was able to add and remove parts perfectly. Next step with this setup: installing Shards. I checked out shards from the latest revision of trunk, and voilá, the behavior I told you in the first email: upon creating a part, the error in javascript (as caught by firebug) and the rendering of the partial with no layout. Whew! Now, for the last test of all (just to be sure), I tested radiant edge WITH shards! 🙂 Result: TRIPLE page part tabs, PLUS the error when adding one. Ok, this one was just not fair. 😉 So, does anyone have any idea of why might that be happening? Does it happen to someone else? Am I doing something wrong? Thanks, Marcelo. ---
**Author:** ![marcelo\_a](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/e9a140/32.png) [@marcelo\_a](https://www.ruby-forum.com/u/marcelo_a)\ **Post date:** [November 7, 2007, 10:30pm UTC](https://www.ruby-forum.com/t/cant-add-page-part-with-shards-installed/119468/6 "2007-11-07T22:30:00Z")
Hi, Sean. Thanks for all your hard work, I appreciate it. What I found particularly weird is that I had these issues with Radiant edge even without Shards. The “double tabs” problem was very strange. I will also try to look into it, but I’m not sure I’ll be able to help much. I’ll talk to you guys later today. Thanks! Marcelo. ---
**Author:** ![marcelo\_a](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/e9a140/32.png) [@marcelo\_a](https://www.ruby-forum.com/u/marcelo_a)\ **Post date:** [November 8, 2007, 12:16am UTC](https://www.ruby-forum.com/t/cant-add-page-part-with-shards-installed/119468/7 "2007-11-08T00:16:05Z")
The “double tabs” issue was a result of a botched patch on my part. The contents of admin.js were duplicated. Removal of the extra lines removed the issue. Sean ---
**Author:** ![marcelo\_a](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/e9a140/32.png) [@marcelo\_a](https://www.ruby-forum.com/u/marcelo_a)\ **Post date:** [November 7, 2007, 6:00pm UTC](https://www.ruby-forum.com/t/cant-add-page-part-with-shards-installed/119468/8 "2007-11-07T18:00:30Z")
Marcelo A. wrote: > _snip_ Hi Marcelo, It seems from Sean’s email that the problems should be fixed (already or soon). Hopefully, it works. I’m not using shard, so can’t comment on it. I just got involved cos I had a very similar problem just yesterday! Cheers, Mohit. 11/8/2007 | 12:59 AM. ---
**Author:** ![marcelo\_a](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/e9a140/32.png) [@marcelo\_a](https://www.ruby-forum.com/u/marcelo_a)\ **Post date:** [November 8, 2007, 3:21am UTC](https://www.ruby-forum.com/t/cant-add-page-part-with-shards-installed/119468/9 "2007-11-08T03:21:19Z")
Oh, alright. I just tested it with the latest trunk revision of both Shards and Radiant, and it all worked perfectly. Thank you very much, Sean! Marcelo.