# Acquisition of datas from usrp e110

**URL:** <https://www.ruby-forum.com/t/acquisition-of-datas-from-usrp-e110/241295>\
**Category:** GNU Radio\
**Created:** [May 22, 2014, 12:30pm UTC](https://www.ruby-forum.com/t/acquisition-of-datas-from-usrp-e110/241295 "2014-05-22T12:30:43Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Detlef\_R](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/d/58f4c7/32.png) [@Detlef\_R](https://www.ruby-forum.com/u/Detlef_R)\
**Post date:** [May 22, 2014, 12:30pm UTC](https://www.ruby-forum.com/t/acquisition-of-datas-from-usrp-e110/241295/1 "2014-05-22T12:30:43Z")

</div>

Hi for everybody,

What is the recommended tool for acquisition of datas from usrp e 110 ?

Best regards,

Wafa HAJ HMIDA

---

<div class="post-metadata">

**Author:** ![wafa\_e](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/w/b4bc9f/32.png) [@wafa\_e](https://www.ruby-forum.com/u/wafa_e)\
**Post date:** [May 22, 2014, 1:06pm UTC](https://www.ruby-forum.com/t/acquisition-of-datas-from-usrp-e110/241295/2 "2014-05-22T13:06:27Z")

</div>

What data are you trying to acquire from the e110?

If you need to forward raw samples from the e110 to your host pc then  
you  
can use a GRC “TCP sink” on the e110 and a “TCP source” on the host pc.

If you wish to aquire data in the form of files from the e110 then you  
can  
use either a USB pen drive, scp, nfs or samba.

Mike

–  
Mike J. M0MIK BSc MIET  
Ettus R. Technical Support  
Email: removed\_email\_address@domain.invalid  
Web: [http://ettus.com](http://ettus.com)

On Thu, May 22, 2014 at 11:29 AM, Wafa E. \<

---

<div class="post-metadata">

**Author:** ![wafa\_e](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/w/b4bc9f/32.png) [@wafa\_e](https://www.ruby-forum.com/u/wafa_e)\
**Post date:** [May 22, 2014, 1:20pm UTC](https://www.ruby-forum.com/t/acquisition-of-datas-from-usrp-e110/241295/3 "2014-05-22T13:20:00Z")

</div>

Thank you,  
In fact, I’m supposed

-to send datas \*from \*\* PXIe-5673 \*described in this link

> **[Product](https://www.ni.com/en-us/shop/hardware/products/pxi-vector-signal-generator.html?modelId=123690)**
>
> Hardware Product Page

_to usrp e 110_(within it I shall program OFDM packet receiver)

-then do the acquisition of data in my PC

2014-05-22 13:04 GMT+02:00 Mike J. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid):