Please i Need help. I am using USRPN210 and i use UHD source and sink. i madeflow-graphfor transmitter using signal source/fm modulator/ uhd sinkand for receiver using UHD source /fm Demodjusti wantto see the signal in RF aftermodulationand whenreceivingit. can anyone advise me or havetutorialsto do that in same flow graph or making delay betweentransmissionand receiving mode. or any think related to this topic.
on 2013-03-05 08:30
on 2013-03-05 19:32
You can use FFT sink block to see your signal.Just connect after your USRP source block where you can see your received signal.
on 2013-03-05 23:18
i didn't mention any port numbers in my grc file.U can still set up sink and source blocks on the same grc file.since the usrp knows that sink is to transmit and source block is to receive. all you need to do is connect them and run the grc files.