Forum: Ruby-core [ruby-trunk - Bug #7623][Open] Messages while RDoc generation

Posted by tomoakin (Tomoaki Nishiyama) (Guest)
on 2012-12-25 10:48
(Received via mailing list)
Issue #7623 has been reported by tomoakin (Tomoaki Nishiyama).

----------------------------------------
Bug #7623: Messages while RDoc generation
https://bugs.ruby-lang.org/issues/7623

Author: tomoakin (Tomoaki Nishiyama)
Status: Open
Priority: Normal
Assignee:
Category: DOC
Target version:
ruby -v: ruby 1.9.3p327 (2012-11-10 revision 37606) [x86_64-linux]


The message reported in
https://bugs.ruby-lang.org/issues/5366
happened during compilation of the ruby-1.9.3-p327.tar.bz2 distribution 
on CentOS6.
While the message was observed just by extract, configure and make,
make clean just after configure did not help either.

uname -a
Linux xxxx 2.6.32-279.14.1.el6.x86_64 #1 SMP Tue Nov 6 23:43:09 UTC 2012 
x86_64 x86_64 x86_64 GNU/Linux

steps to reproduce
 $ tar jxvf ruby-1.9.3-p327.tar.bz2
 $ cd ruby-1.9.3-p327
 $ ./configure --prefix=$HOME/local
 $ make
...
Generating RDoc documentation
Parsing sources...
lib/mkmf.rb:1117:29: Couldn't find STRING_OR_FAILED_FORMAT. Assuming 
it's a module
lib/irb/inspector.rb:36:36: Couldn't find INSPECTORS. Assuming it's a 
module
Enclosing class/module 'mDigest' for class MD5 not known
Enclosing class/module 'mDigest' for class RMD160 not known
Enclosing class/module 'mDigest' for class SHA1 not known
Enclosing class/module "cASN1ObjectId" for alias short_name sn not known
Enclosing class/module "cASN1ObjectId" for alias long_name ln not known
100% [773/773]  doc/re.rdoc

These messages are unclear if they are normal notification/warnings
that may be ignored, or error messages that should be taken care of.
make test reported no error.
If this is not a bad indicator, some explanation in document is desired.

make; make clean; make
sequence have not solved problem, but
generated the following error:

configuring zlib
make[1]: Entering directory `/home/tomoaki/ruby-1.9.3-p327'
make[2]: Entering directory 
`/home/tomoaki/ruby-1.9.3-p327/ext/-test-/array/resize'
compiling resize.c
linking shared-object -test-/array/resize.so
/usr/bin/ld: cannot open output file 
../../../../.ext/x86_64-linux/-test-/array/resize.so: No such file or 
directory
collect2: ld returned 1 exit status
make[2]: *** [../../../../.ext/x86_64-linux/-test-/array/resize.so] 
Error 1
make[2]: Leaving directory 
`/home/tomoaki/ruby-1.9.3-p327/ext/-test-/array/resize'
make[1]: *** [ext/-test-/array/resize/all] Error 2
make[1]: Leaving directory `/home/tomoaki/ruby-1.9.3-p327'
make: *** [build-ext] Error 2

This is apparently another problem, which need not be handled in normal 
installation.
But suggests that make clean fails to delete something that should be 
deleted or
insufficient information is described in the Makefile.
Posted by zzak (Zachary Scott) (Guest)
on 2012-12-28 21:07
(Received via mailing list)
Issue #7623 has been updated by zzak (Zachary Scott).

Status changed from Open to Closed

duplicate of #7550
----------------------------------------
Bug #7623: Messages while RDoc generation
https://bugs.ruby-lang.org/issues/7623#change-35128

Author: tomoakin (Tomoaki Nishiyama)
Status: Closed
Priority: Normal
Assignee:
Category: DOC
Target version:
ruby -v: ruby 1.9.3p327 (2012-11-10 revision 37606) [x86_64-linux]


The message reported in
https://bugs.ruby-lang.org/issues/5366
happened during compilation of the ruby-1.9.3-p327.tar.bz2 distribution 
on CentOS6.
While the message was observed just by extract, configure and make,
make clean just after configure did not help either.

uname -a
Linux xxxx 2.6.32-279.14.1.el6.x86_64 #1 SMP Tue Nov 6 23:43:09 UTC 2012 
x86_64 x86_64 x86_64 GNU/Linux

steps to reproduce
 $ tar jxvf ruby-1.9.3-p327.tar.bz2
 $ cd ruby-1.9.3-p327
 $ ./configure --prefix=$HOME/local
 $ make
...
Generating RDoc documentation
Parsing sources...
lib/mkmf.rb:1117:29: Couldn't find STRING_OR_FAILED_FORMAT. Assuming 
it's a module
lib/irb/inspector.rb:36:36: Couldn't find INSPECTORS. Assuming it's a 
module
Enclosing class/module 'mDigest' for class MD5 not known
Enclosing class/module 'mDigest' for class RMD160 not known
Enclosing class/module 'mDigest' for class SHA1 not known
Enclosing class/module "cASN1ObjectId" for alias short_name sn not known
Enclosing class/module "cASN1ObjectId" for alias long_name ln not known
100% [773/773]  doc/re.rdoc

These messages are unclear if they are normal notification/warnings
that may be ignored, or error messages that should be taken care of.
make test reported no error.
If this is not a bad indicator, some explanation in document is desired.

make; make clean; make
sequence have not solved problem, but
generated the following error:

configuring zlib
make[1]: Entering directory `/home/tomoaki/ruby-1.9.3-p327'
make[2]: Entering directory 
`/home/tomoaki/ruby-1.9.3-p327/ext/-test-/array/resize'
compiling resize.c
linking shared-object -test-/array/resize.so
/usr/bin/ld: cannot open output file 
../../../../.ext/x86_64-linux/-test-/array/resize.so: No such file or 
directory
collect2: ld returned 1 exit status
make[2]: *** [../../../../.ext/x86_64-linux/-test-/array/resize.so] 
Error 1
make[2]: Leaving directory 
`/home/tomoaki/ruby-1.9.3-p327/ext/-test-/array/resize'
make[1]: *** [ext/-test-/array/resize/all] Error 2
make[1]: Leaving directory `/home/tomoaki/ruby-1.9.3-p327'
make: *** [build-ext] Error 2

This is apparently another problem, which need not be handled in normal 
installation.
But suggests that make clean fails to delete something that should be 
deleted or
insufficient information is described in the Makefile.
Posted by tomoakin (Tomoaki Nishiyama) (Guest)
on 2012-12-29 14:15
(Received via mailing list)
Issue #7623 has been updated by tomoakin (Tomoaki Nishiyama).


Thank you for looking at my report.
My point is on the messages:

lib/mkmf.rb:1117:29: Couldn't find STRING_OR_FAILED_FORMAT. Assuming 
it's a module
lib/irb/inspector.rb:36:36: Couldn't find INSPECTORS. Assuming it's a 
module
Enclosing class/module 'mDigest' for class MD5 not known
Enclosing class/module 'mDigest' for class RMD160 not known
Enclosing class/module 'mDigest' for class SHA1 not known
Enclosing class/module "cASN1ObjectId" for alias short_name sn not known
Enclosing class/module "cASN1ObjectId" for alias long_name ln not known

make after make clean was just to test if the above message disappear 
after one round of make.
The make after make clean problem was solved in 1.9.3-p362 but the above 
message continued.
----------------------------------------
Bug #7623: Messages while RDoc generation
https://bugs.ruby-lang.org/issues/7623#change-35143

Author: tomoakin (Tomoaki Nishiyama)
Status: Closed
Priority: Normal
Assignee:
Category: DOC
Target version:
ruby -v: ruby 1.9.3p327 (2012-11-10 revision 37606) [x86_64-linux]


The message reported in
https://bugs.ruby-lang.org/issues/5366
happened during compilation of the ruby-1.9.3-p327.tar.bz2 distribution 
on CentOS6.
While the message was observed just by extract, configure and make,
make clean just after configure did not help either.

uname -a
Linux xxxx 2.6.32-279.14.1.el6.x86_64 #1 SMP Tue Nov 6 23:43:09 UTC 2012 
x86_64 x86_64 x86_64 GNU/Linux

steps to reproduce
 $ tar jxvf ruby-1.9.3-p327.tar.bz2
 $ cd ruby-1.9.3-p327
 $ ./configure --prefix=$HOME/local
 $ make
...
Generating RDoc documentation
Parsing sources...
lib/mkmf.rb:1117:29: Couldn't find STRING_OR_FAILED_FORMAT. Assuming 
it's a module
lib/irb/inspector.rb:36:36: Couldn't find INSPECTORS. Assuming it's a 
module
Enclosing class/module 'mDigest' for class MD5 not known
Enclosing class/module 'mDigest' for class RMD160 not known
Enclosing class/module 'mDigest' for class SHA1 not known
Enclosing class/module "cASN1ObjectId" for alias short_name sn not known
Enclosing class/module "cASN1ObjectId" for alias long_name ln not known
100% [773/773]  doc/re.rdoc

These messages are unclear if they are normal notification/warnings
that may be ignored, or error messages that should be taken care of.
make test reported no error.
If this is not a bad indicator, some explanation in document is desired.

make; make clean; make
sequence have not solved problem, but
generated the following error:

configuring zlib
make[1]: Entering directory `/home/tomoaki/ruby-1.9.3-p327'
make[2]: Entering directory 
`/home/tomoaki/ruby-1.9.3-p327/ext/-test-/array/resize'
compiling resize.c
linking shared-object -test-/array/resize.so
/usr/bin/ld: cannot open output file 
../../../../.ext/x86_64-linux/-test-/array/resize.so: No such file or 
directory
collect2: ld returned 1 exit status
make[2]: *** [../../../../.ext/x86_64-linux/-test-/array/resize.so] 
Error 1
make[2]: Leaving directory 
`/home/tomoaki/ruby-1.9.3-p327/ext/-test-/array/resize'
make[1]: *** [ext/-test-/array/resize/all] Error 2
make[1]: Leaving directory `/home/tomoaki/ruby-1.9.3-p327'
make: *** [build-ext] Error 2

This is apparently another problem, which need not be handled in normal 
installation.
But suggests that make clean fails to delete something that should be 
deleted or
insufficient information is described in the Makefile.
Posted by drbrain (Eric Hodel) (Guest)
on 2013-01-16 22:25
(Received via mailing list)
Issue #7623 has been updated by drbrain (Eric Hodel).

Assignee set to drbrain (Eric Hodel)
Target version set to 2.0.0
% Done changed from 0 to 100

=begin
These messages have all been fixed:


  Generating RDoc documentation
  Parsing sources...
  100% [873/873]  /Users/drbrain/Work/svn/ruby/trunk/vsnprintf.c

  Generating RI format into 
/Users/drbrain/Work/svn/ruby/build/.ext/rdoc...

  Files:        873

  Classes:     1419 (   0 undocumented)
  Modules:      315 (   7 undocumented)
  Constants:   1657 ( 818 undocumented)
  Attributes:  1154 ( 399 undocumented)
  Methods:    11164 (2840 undocumented)

  Total:      15709 (4064 undocumented)
   74.13% documented

  Elapsed: 119.5s
=end

----------------------------------------
Bug #7623: Messages while RDoc generation
https://bugs.ruby-lang.org/issues/7623#change-35455

Author: tomoakin (Tomoaki Nishiyama)
Status: Closed
Priority: Normal
Assignee: drbrain (Eric Hodel)
Category: DOC
Target version: 2.0.0
ruby -v: ruby 1.9.3p327 (2012-11-10 revision 37606) [x86_64-linux]


The message reported in
https://bugs.ruby-lang.org/issues/5366
happened during compilation of the ruby-1.9.3-p327.tar.bz2 distribution 
on CentOS6.
While the message was observed just by extract, configure and make,
make clean just after configure did not help either.

uname -a
Linux xxxx 2.6.32-279.14.1.el6.x86_64 #1 SMP Tue Nov 6 23:43:09 UTC 2012 
x86_64 x86_64 x86_64 GNU/Linux

steps to reproduce
 $ tar jxvf ruby-1.9.3-p327.tar.bz2
 $ cd ruby-1.9.3-p327
 $ ./configure --prefix=$HOME/local
 $ make
...
Generating RDoc documentation
Parsing sources...
lib/mkmf.rb:1117:29: Couldn't find STRING_OR_FAILED_FORMAT. Assuming 
it's a module
lib/irb/inspector.rb:36:36: Couldn't find INSPECTORS. Assuming it's a 
module
Enclosing class/module 'mDigest' for class MD5 not known
Enclosing class/module 'mDigest' for class RMD160 not known
Enclosing class/module 'mDigest' for class SHA1 not known
Enclosing class/module "cASN1ObjectId" for alias short_name sn not known
Enclosing class/module "cASN1ObjectId" for alias long_name ln not known
100% [773/773]  doc/re.rdoc

These messages are unclear if they are normal notification/warnings
that may be ignored, or error messages that should be taken care of.
make test reported no error.
If this is not a bad indicator, some explanation in document is desired.

make; make clean; make
sequence have not solved problem, but
generated the following error:

configuring zlib
make[1]: Entering directory `/home/tomoaki/ruby-1.9.3-p327'
make[2]: Entering directory 
`/home/tomoaki/ruby-1.9.3-p327/ext/-test-/array/resize'
compiling resize.c
linking shared-object -test-/array/resize.so
/usr/bin/ld: cannot open output file 
../../../../.ext/x86_64-linux/-test-/array/resize.so: No such file or 
directory
collect2: ld returned 1 exit status
make[2]: *** [../../../../.ext/x86_64-linux/-test-/array/resize.so] 
Error 1
make[2]: Leaving directory 
`/home/tomoaki/ruby-1.9.3-p327/ext/-test-/array/resize'
make[1]: *** [ext/-test-/array/resize/all] Error 2
make[1]: Leaving directory `/home/tomoaki/ruby-1.9.3-p327'
make: *** [build-ext] Error 2

This is apparently another problem, which need not be handled in normal 
installation.
But suggests that make clean fails to delete something that should be 
deleted or
insufficient information is described in the Makefile.
Please log in before posting. Registration is free and takes only a minute.
Existing account (Switch to SSL-encrypted connection)
NEW: Do you have a Google/GoogleMail or Yahoo account? No registration required!
Log in with Google account | Log in with Yahoo account
No account? Register here.