Forum: GNU Radio How to change bitrate in GRC

Hi all

I found the default bit rate is 500k, which means one slot is 2us. How 
to
change the bit rate in GRC? Thank you for your time and help.

Lin



--
View this message in context: 
http://gnuradio.4.n7.nabble.com/How-to-change-bitr...
Sent from the GnuRadio mailing list archive at Nabble.com.

On 11/06/2012 07:03 PM, llc1989522 wrote:
> Hi all
>
> I found the default bit rate is 500k, which means one slot is 2us. How to
> change the bit rate in GRC? Thank you for your time and help.
>
> Lin
>
>
>
You are presumably discussing a *specific* signal flow when you talk
about bit-rate.  GRC doesn't, inherently, know anything about
   bit rates.

What .grc file are you experimenting with?



--
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org

On 11/06/2012 07:44 PM, Linchao Liao wrote:
> Thank you for your time and help.
>
> Lin
>
The UHD sink has a sample rate parameter.  Your whole graph will be
"paced" by that parameter.  Make it whatever you want, subject to
   the usual restrictions that it must be a proper decimated rate from
the basic sample rate.

What device are you using?

For N2XX, the basic rate is 100e6  so sample rates have to be a proper
integer fraction of that rate
For B100/E100/USRP1 the basic rate is 64e6